Synthesis and characterization of polyimides derived from (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides

A series of new polyimides were prepared via the polycondensation of (3‐amino‐2,4,6‐trimethylphenyl)‐(3′‐aminophenyl)methanone and aromatic dianhydrides, that is, 3,3′,4,4′‐biphenyltetracarboxylic dianhydride (BPDA), 4,4′‐oxydiphthalic anhydride, 3,3′,4,4′‐benzophenone tetracarboxylic dianhydride, and 2,2′‐bis(3,4‐dicarboxyphenyl) hexafluoropropane dianhydride. The structures of the polyimides were characterized by Fourier transform infrared and NMR measurements. The properties were evaluated by solubility tests, ultraviolet–visible analysis, differential scanning calorimetry, and thermogravimetric analysis. The two different meta‐position‐located amino groups with respect to the carbonyl bridge in the diamine monomer provided it with an unsymmetrical structure. This led to a restriction on the close packing of the resulting polymer chains and reduced interchain interactions, which contributed to the solubility increase. All the polyimides except that derived from BPDA had good solubility in strong aprotic solvents, such as N‐methyl‐2‐pyrrolidinone, N,N′‐dimethylacetamide, N,N‐dimethylformamide, and dimethyl sulfone, and in common organic solvents, such as cyclohexanone and chloroform. In addition, these polyimides exhibited high glass‐transition values and excellent thermal properties, with an initial thermal decomposition temperature above 470 °C and glass‐transition temperatures in the range of 280–320 °C. The polyimide films also exhibited good transparency in the visible‐light region, with transmittance higher than 80% at 450 nm and a cutoff wavelength lower than 370 nm. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1291–1298, 2006     

Characterization and electrical properties of polypyrrole/multiwalled carbon nanotube composites synthesized by in situ chemical oxidative polymerization

This study describes the preparation of polypyrrole (PPy)/multiwalled carbon nanotube (MWNT) composites by in situ chemical oxidative polymerization. Various ratios of MWNTs, which served as hard templates, were first dispersed in aqueous solutions with the surfactant cetyltrimethylammonium bromide to form micelle/MWNT templates and overcome the difficulty of MWNTs dispersing into insoluble solutions of pyrrole monomer, and PPy was then synthesized via in situ chemical oxidative polymerization on the surface of the templates. Raman spectroscopy, Fourier transform infrared (FTIR), field‐emission scanning electron microscopy (FESEM), and high‐resolution transmission electron microscopy (HRTEM) were used to characterize the structure and morphology of the fabricated composites. Structural analysis using FESEM and HRTEM showed that the PPy/MWNT composites were core (MWNT)–shell (PPy) tubular structures. Raman and FTIR spectra of the composites were almost identical to those of PPy, supporting the idea that MWNTs served as the core in the formation of a coaxial nanostructure for the composites. The conductivities of these PPy/MWNT composites were about 150% higher than those of PPy without MWNTs. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1413–1418, 2006     

Time-resolved chirp evaluations of Gbit/s NRZ and gain-switched DFB laser pulses using narrowband Fabry-Perot spectrometer

A compact, easy-to-use, low-cost spectrometer for solving the chirped spectrum of DFB lasers is demonstrated using narrowband Fabry-Perot etalons with resolutions comparable to grating spectrometers. Time-resolved chirp measurements of Gbit/s NRZ and gain-switched DFB laser pulses are presented.<>     

A comparison study of the two-tier and the single-tier personal communications services systems

A two-tier PCS system integrates the high tier PCS system and the low tier PCS systems into a single system to provide the advantages of both tiers. Such a system is expected to provide better service (more available and more cost effective to the users) at the expense of the extra tier switching management. We compare the performance of the two-tier PCS system and the single low tier system in two aspects: the registration traffic and the service availability. Because of the tier management, the two-tier system generates more registration traffic than the single low tier system. Under the range of the input parameters in our study, we show that the two-tier system generates less than 10% extra registration traffic than the single low tier system in most cases and generates less than 20% registration traffic in the worst cases. It is clear that for the service availability, the two-tier system is better than the single one tier system. We also study the probability that a call is forced terminated in the single low tier system because the low tier becomes unavailable during the call (such a call can be continued in the two-tier system).     

A new process of fabricating inverted-staggered tri-layer thin-filmtransistors

A new method of fabricating a-Si:H TFT with etching-stop structure has been proposed. Only one plasma-enhanced chemical vapor deposition is required in this new method and a PH₃/H₂ plasma treatment during the deposition has been used to form the TFT contact and thus saved another plasma deposition. With this method, a TFT of 500 Å active layer has been fabricated successfully. The drain current and saturation mobility of this device is 2.4×10^-7 A and 0.1 cm²/V sec, respectively, which is comparable to the conventional fabricating method. The plasma treatment will also form an additional leakage path on the TFT top surface and increase the TFT subthreshold slope. However, a current of less than 1 pA at V_G=-2.4 V can still be obtained. The possible mechanism of the contact formation by the plasma treatment is also discussed     

Robust controller with disturbance rejection for hydraulic servosystems

A controller is presented that improves the performance and reduces the sensitivity of hydraulic servo systems in the presence of parameter variations, nonlinear effects, and other disturbances. The control system has enhanced closed-loop stability and can recover from steady-state and transient error quickly and completely. It consists of a servo controller, an auxiliary controller, and a robust controller. Simulation and experimental results demonstrate the validity of the controller     

Percolation and electrical resistivity in the YBa2Cu3O7−Ag composite system

We have measured the resistivity of the YBa₂Cu₃O₇–Ag composite system with Ag volume fraction,p _Ag ranging from 0–100%. The percolation behavior and the normal-state resistivity are studied. We find a three-dimensional threshold for the Ag matrix occurring atp _Ag 20% and a threshold for the superconducting matrix occurring at 1–p _Ag30%. The electrical resistivity is interpreted in terms of a resistivity model for granular YBa₂Cu₃O₇ proposed by Halbritter et al. [Z. Phys. B —Condensed Matter71, 411 (1988)]. Based on this model, we show that the resistivities between the YBa₂Cu₃O₇ grains and flaws in the grains are greatly diminished in the samples, indicating significantly improved grain growth behavior of the YBa₂Cu₃O₇ phase resulting from the addition of Ag. With the diminishing of the grain boundary resistivities, an intrinsic value for the temperature coefficient of resistivity, (1/gr)(d/dT), can be inferred, which is 3.3×10^–3/K at 300 K. This value is very close to that observed in the Cu–O₂ planes in single crystals and epitaxial films of YBa₂Cu₃O₇.     

The increments of partial sums of a dependent sequence when the moment generating functions do not exist

In the paper, we give the almost sure limiting behaviour of the increments of partial sums of a-mixing sequence when the moment generating functions do not exist. The results obtained are close to those for an independent sequence provided that the mixing coefficients tend to zero rapidly enough.The Project Supported by National Natural Science Foundation of China.