Cell Development Enhanced Bionic Silk Hydrogel on Remodeling Immune Pathogenesis of Spinal Cord Injury via M2 Polarization of Microglial

Due to the complex spatial-temporal pathophysiology of spinal cord injury (SCI), effective modulation of SCI-specific inflammatory pathogenesis to achieve desirable therapeutic effects on functional recovery still remains challenging. Herein, cell-enhanced photocrosslinked silk fibroin hydrogels with extracellular matrix-mimicking cues of mechanical properties and RGD (Arg-Gly-Asp) signals are gelled in situ to fill the lesion site to modulate injury-induced neuroinflammation and promote neurite regrowth after SCI. The bionic hydrogel system provides biomimetic mechanical cues to promote neuronal differentiation of neural stem/progenitor cells (NPCs) and neurite growth by activating YAP nuclear expression. Importantly, favored by the strong capacity of silk fibroin hydrogels on macrophage/microglia recruitment, NPCs encapsulated hydrogel (NPCs@SFRGD0.1) effectively promotes recruited macrophages/microglia to M2 polarization in the lesion site by releasing S100A4 and thereby remodels the inflammatory microenvironment after SCI. Moreover, NPCs@SFRGD0.1 successfully reduces glial scar formation and accelerates corticospinal tract axon regrowth to improve locomotor recovery. Overall, this work contributes to illustrating the therapeutic mechanism of NPCs development based biomaterial therapies on modulating inflammatory microenvironment and this NPCs enhanced silk fibroin hydrogel provides a promising therapeutic strategy for SCI.     

Room-Temperature-Processable Highly Reliable Resistive Switching Memory with Reconfigurability for Neuromorphic Computing and Ultrasonic Tissue Classification

Reversible metal-filamentary mechanism has been widely investigated to design an analog resistive switching memory (RSM) for neuromorphic hardware-implementation. However, uncontrollable filament-formation, inducing its reliability issues, has been a fundamental challenge. Here, an analog RSM with 3D ion transport channels that can provide unprecedentedly high reliability and robustness is demonstrated. This architecture is realized by a laser-assisted photo-thermochemical process, compatible with the back-end-of-line process and even applicable to a flexible format. These superior characteristics also lead to the proposal of a practical adaptive learning rule for hardware neural networks that can significantly simplify the voltage pulse application methodology even with high computing accuracy. A neural network, which can perform the biological tissue classification task using the ultrasound signals, is designed, and the simulation results confirm that this practical adaptive learning rule is efficient enough to classify these weak and complicated signals with high accuracy (97%). Furthermore, the proposed RSM can work as a diffusive-memristor at the opposite voltage polarity, exhibiting extremely stable threshold switching characteristics. In this mode, several crucial operations in biological nervous systems, such as Ca²⁺ dynamics and nonlinear integrate-and-fire functions of neurons, are successfully emulated. This reconfigurability is also exceedingly beneficial for decreasing the complexity of systems—requiring both drift- and diffusive-memristors.     

Tough Transient Ionic Junctions Printed with Ionic Microgels

Emerging soft ionotronics better match the human body mechanically and electrically compared to conventional rigid electronics. They hold great potential for human-machine interfaces, wearable and implantable devices, and soft machines. Among various ionotronic devices, ionic junctions play critical roles in rectifying currents as electrical p–n junctions. Existing ionic junctions, however, are limited in electrical and mechanical performance, and are difficult to fabricate and degrade. Herein, the design, fabrication, and characterization of tough transient ionic junctions fabricated via 3D ionic microgel printing is reported. The 3D printing method demonstrates excellent printability and allows one to fabricate ionic junctions of various configurations with high fidelity. By combining ionic microgels, degradable networks, and highly charged biopolymers, the ionic junctions feature high stretchability (stretch limit 27), high fracture energy (>1000 Jm⁻²), excellent electrical performance (current rectification ratio >100), and transient stability (degrade in 1 week). A variety of ionotronic devices, including ionic diodes, ionic bipolar junction transistors, ionic full-wave rectifiers, and ionic touchpads are further demonstrated. This study merges ionotronics, 3D printing, and degradable hydrogels, and will motivate the future development of high-performance transient ionotronics.     

A Stable Polymer-based Solid-State Lithium Metal Battery and its Interfacial Characteristics Revealed by Cryogenic Transmission Electron Microscopy

Solid-state lithium metal batteries (SSLMBs) are a promising candidate for next-generation energy storage systems due to their intrinsic safety and high energy density. However, they still suffer from poor interfacial stability, which can incur high interfacial resistance and insufficient cycle lifespan. Herein, a novel poly(vinylidene fluoride‑hexafuoropropylene)-based polymer electrolyte (PPE) with LiBF₄ and propylene carbonate plasticizer is developed, which has a high room-temperature ionic conductivity up to 1.15 × 10⁻³ S cm⁻¹ and excellent interfacial stability. Benefitting from the stable interphase, the PPE-based symmetric cell can operate for over 1000 h. By virtue of cryogenic transmission electron microscopy (Cryo-TEM) characterization, the high interfacial compatibility between Li metal anode and PPE is revealed. The solid electrolyte interphase is made up of an amorphous outer layer that can keep intimate contact with PPE and an inner Li₂O-dominated layer that can protect Li from continuous side reactions during battery cycling. A LiF-rich transition layer is also discovered in the region of PPE close to Li metal anode. The feasibility of investigating interphases in polymer-based solid-state batteries via Cryo-TEM techniques is demonstrated, which can be widely employed in future to rationalize the correlation between solid-state electrolytes and battery performance from ultrafine interfacial structures.     

Plasma Enhanced Lithium Coupled with Cobalt Fibers Arrays for Advanced Energy Storage

Construction of high efficiency and stable Li metal anodes is extremely vital to the breakthrough of Li metal batteries. In this study, for the first time, groundbreaking in situ plasma interphase engineering is reported to construct high-quality lithium halides-dominated solid electrolyte interphase layer on Li metal to stabilize & protect the anode. Typically, SF₆ plasma-induced sulfured and fluorinated interphase (SFI) is composed of LiF and Li₂S, interwoven with each other to form a consecutive solid electrolyte interphase. Simultaneously, brand-new vertical Co fibers (diameter: ≈5 µm) scaffold is designed via a facile magnetic-field-assisted hydrothermal method to collaborate with plasma-enhanced Li metal anodes (SFI@Li/Co). The Co fibers scaffold accommodates active Li with mechanical integrity and decreases local current density with good lithiophilicity and low geometric tortuosity, supported by DFT calculations and COMSOL Multiphysics simulation. Consequently, the assembled symmetric cells with SFI@Li/Co anodes exhibit superior stability over 525 h with a small voltage hysteresis (125 mV at 5 mA cm⁻²) and improved Coulombic efficiency (99.7%), much better than the counterparts. Enhanced electrochemical performance is also demonstrated in full cells with commercial cathodes and SFI@Li/Co anode. The research offers a new route to develop advanced alkali metal anodes for energy storage.     

Wearable Organic Electrochemical Transistor Array for Skin-Surface Electrocardiogram Mapping Above a Human Heart

Electrocardiogram (ECG) mapping can provide vital information in sports training and cardiac disease diagnosis. However, most electronic devices for monitoring ECG signals need to use multiple long wires, which limit their wearability and conformability in practical applications, while wearable ECG mapping based on integrated sensor arrays has been rarely reported. Herein, ultra-flexible organic electrochemical transistor (OECT) arrays used for wearable ECG mapping on the skin surface above a human heart are presented. QRS complexes of ECG signals at different recording distances and directions relative to the heart are obtained. Furthermore, the ECG signals are successfully analyzed by the devices before and after exercise, indicating potential applications in some sports training and fitness scenarios. The OECT arrays that can conveniently monitor spacial ECG signals in the heart region may find niche applications in wearable electronics and healthcare products in the future.     

An Intrinsically Nonflammable Electrolyte for Prominent-Safety Lithium Metal Batteries with High Energy Density and Cycling Stability

Nex-generation high-energy-density storage battery, assembled with lithium (Li)-metal anode and nickel-rich cathode, puts forward urgent demand for advanced electrolytes that simultaneously possess high security, wide electrochemical window, and good compatibility with electrode materials. Herein an intrinsically nonflammable electrolyte is designed by using 1 M lithium difluoro(oxalato)borate (LiDFOB) in triethyl phosphate (TEP) and N-methyl-N-propyl-pyrrolidinium bis(trifluoromethylsulfonyl)imide [Pyr₁₃][TFSI] ionic liquid (IL) solvents. The introduction of IL can bring plentiful organic cations and anions, which provides a cation shielding effect and regulates the Li⁺ solvation structure with plentiful Li⁺-DFOB⁻ and Li⁺-TFSI⁻ complexes. The unique Li⁺ solvation structure can induce stable anion-derived electrolyte/electrode interphases, which effectively inhibit Li dendrite growth and suppress side reactions between TEP and electrodes. Therefore, the LiNi_0.9Co_0.05Mn_0.05O₂ (NCM90)/Li coin cell with this electrolyte can deliver stable cycling even under 4.5 V and 60 °C. Moreover, a Li-metal battery with thick NCM90 cathode (≈ 15 mg cm⁻²) and thin Li-metal anode (≈ 50 µm) (N/P ≈ 3), also reveals stable cycling performance under 4.4 V. And a 2.2 Ah NCM90/Li pouch cell can simultaneously possess prominent safety with stably passing the nail penetration test, and high gravimetric energy density of 470 Wh kg⁻¹ at 4.4 V.     

Noble Metal Ion-Directed Assembly of 2D Materials for Heterostructured Catalysts and Metallic Micro-Texturing

Assembling 2D-material (2DM) nanosheets into micro- and macro-architectures with augmented functionalities requires effective strategies to overcome nanosheet restacking. Conventional assembly approaches involve external binders and/or functionalization, which inevitably sacrifice 2DM's nanoscale properties. Noble metal ions (NMI) are promising ionic crosslinkers, which can simultaneously assemble 2DM nanosheets and induce synergistic properties. Herein, a collection of NMI–2DM complexes are screened and categorized into two sub-groups. Based on the zeta potentials, two assembly approaches are developed to obtain 1) NMI-crosslinked 2DM hydrogels/aerogels for heterostructured catalysts and 2) NMI–2DM inks for templated synthesis. First, tetraammineplatinum(II) nitrate (TPtN) serves as an efficient ionic crosslinker to agglomerate various 2DM dispersions. By utilizing micro-textured assembly platforms, various TPtN–2DM hydrogels are fabricated in a scalable fashion. Afterward, these hydrogels are lyophilized and thermally reduced to synthesize Pt-decorated 2DM aerogels (Pt@2DM). The Pt@2DM heterostructures demonstrate high, substrate-dependent catalytic activities and promote different reaction pathways in the hydrogenation of 3-nitrostyrene. Second, PtCl₄ can be incorporated into 2DM dispersions at high NMI molarities to prepare a series of PtCl₄–2DM inks with high colloidal stability. By adopting the PtCl₄–graphene oxide ink, various Pt micro-structures with replicated topographies are synthesized with accurate control of grain sizes and porosities.     

Proximity-Induced Fully Ferromagnetic Order with Eightfold Magnetic Anisotropy in Heavy Transition Metal Oxide CaRuO3

Ferromagnetic materials with a strong spin-orbit coupling (SOC) have attracted much attention in recent years because of their exotic properties and potential applications in energy-efficient spintronics. However, such materials are scarce in nature. Here, a proximity-induced paramagnetic to ferromagnetic transition for the heavy transition metal oxide CaRuO₃ in (001)-(LaMnO₃/CaRuO₃) superlattices is reported. Anomalous Hall effect is observed in the temperature range up to 180 K. Maximal anomalous Hall conductivity and anomalous Hall angle are as large as ∼15 Ω⁻¹ cm⁻¹ and ∼0.93%, respectively, by one to two orders of magnitude larger than those of the typical 3d ferromagnetic oxides such as La_0.67Sr_0.33MnO₃. Density functional theory calculations indicate the existence of avoid band crossings in the electronic band structure of the ferromagnetic CRO layer, which enhances Berry curvature thus strong anomalous Hall effects. Further evidences from polarized neutron reflectometry show that the CaRuO₃ layers are in a fully ferromagnetic state (∼0.8 μ_B/Ru), in sharp contrast to the proximity-induced canted antiferromagnetic state in 5d oxides SrIrO₃ and CaIrO₃ (∼0.1 μ_B/Ir). More than that, the magnetic anisotropy of the (001)-(LaMnO₃/CaRuO₃) superlattices is eightfold symmetric, showing potential applications in the technology of multistate data storage.     

A Visible and Near-Infrared Light-Fueled Omnidirectional Twist-Bend Crawling Robot

In recent years, although light-driven soft actuators have attracted intense scientific attention and achieved remarkable progress, the design and construction of an intelligent robotic system with maneuverability, self-adaptability, untethered control, and greater freedom of action, in particular the omnidirectional motion capability on a plane, remains challenging. Herein, four types of photo-thermal fillers and an unprecedented twist-bend actuation mode is introduced into a liquid crystal elastomer-based soft robot. The obtained twist-bend crawling robot not only exhibits in situ rotation, four-way turning, and four-way linear motion under light irradiation with four wavelength bands (520, 655, 808, and 980 nm), but also demonstrates the ability to avoid obstacles in complex geographical environments. This work may bring a new perspective for fabrication and development of soft robots that can adapt to dynamic and complex environmental conditions.