DFB active filter/detector for multichannel FSK optical transmission

In a DFB laser amplifier, used simultaneously as narrow band optical filter and detector in O-FDM systems the increase of the input optical power induces distortion of the filter transfer function. The effect of such a distortion on the receiver sensitivity and dynamic range has been investigated in a 155 Mbit/s FSK direct detection experiment. A two-channel experiment is also reported for the first time. Owing to the effect of interference between the two channels, it has been found that a minimum channel spacing of about 15 GHz is required to maintain the bit error rate below 10/sup -9/.<>     

Non-quasi-static models including all injection levels and DC, AC,and transient emitter crowding in bipolar transistors

Two-dimensional equivalent-circuit models for bipolar junction transistors are systematically derived by solving the continuity equations for DC, AC, and transient excitations. These models take into account carrier propagation delay, all injection levels, as well as exponential doping profiles. They include analytically DC, AC, and transient emitter crowding in a more detailed and accurate manner than previously available. Extensions of the models to accommodate arbitrarily doped and heavily doped quasi-neutral layers and to include energy-gap narrowing due to the electron-hole plasma present at high current density are described. The analysis leads to compact large- and small-signal equivalent-circuit lumped models, suitable for use in circuit simulators such as SPICE. The analytical solutions obtained reveal the two-dimensional distribution of the current and carrier densities in the intrinsic base layer and the onset of emitter crowding. They also provide information for the extraction of the intrinsic base resistance. Several assumptions made in the derivations are assessed by the computer program PISCES. The methods presented apply to both homojunction and heterojunction bipolar transistors     

A generalized Adadorov theory for anisotropic thin-walled beams

This paper presents a generalized Adadorov theory for anisotropic thin—walled beams. The theory takes account of the shear strain of the middle surface, which exerts a significant influence on the anisotropic thin-walled beams. A new approach is established to solve the governing equations, which have the same form for both open and closed section beams. The numerical examples show that the effects of the shear strain cannot be neglected for this class of beams.This work was part of research project supported by the National Natural Science Foundation of China     

An efficient approach for calculating the dispersions of photonic-crystal fibers: design of the nearly zero ultra-flattened dispersion

A novel and efficient approach is proposed to calculate the dispersions of the guided modes of the photonic-crystal fibers (PCFs). Based on the vector boundary-element method (VBEM), the surface integral equations for the first and second derivatives of the propagation constants with respect to the wavelength are explicitly derived. Compared with the three-point finite-difference approach, which needs to solve and search three effective indexes near the interested wavelength, this approach can determine the dispersions of the PCFs by only solving one effective index at this wavelength based on the derived formulations. This novel approach saves over 60% computing time without losing the accuracy. Based on this approach, a novel four-ring PCF is designed by optimizing only three geometrical parameters to achieve the nearly zero ultra-flattened dispersion property. Compared with previously presented dispersion-flattened PCFs, the design procedure for the four-ring structure could be more efficient and easier because relatively lesser parameters need to be optimized.     

青岛港货运吞吐量的时间序列模型

运用时间序列分析方法对时间序列建立ARMA,ARIMA模型.搜集了青岛港1999年1月～2003年5月的货运吞吐量数据,对进行分析,建立了青岛港货运吞吐量的模型.通过预留的部分数据对模型进行检验,并对模型的残差进行检验,得出模型比较合理.     

Assessing the Core Resources in the Environmental Management System From the Resource Perspective and the Contingency Perspective

The purpose of this paper is twofold. The first objective is to examine the core resources that make environmental management system (EMS) a potential basis of sustainable competitive advantage from the resource-based view of the firm. The second objective is to investigate the set of core resources from the contingency perspective. Particularly, experience in implementing other manufacturing systems and the stage of EMS implementation were tested as the contingency factors. The proposed model and its related hypotheses were tested using structural equation modeling on a large-scale database consisting of 1453 respondents. The results showed that it is the tacit resources within an EMS, in the form of top management team's strategic perception, cross-functional cooperation, and environmentally responsible suppliers, which help explain firmspsila operational performance. The findings provided the general principles in investment decisions of EMS. However, the results also demonstrated that the pattern of the core resources varies across firms with different experience in other manufacturing systems and at different stages of EMS implementation. As a result, there is no standard bundle of critical resources for each firm. Rather, firms need to tailor their resource investment decisions in light of these factors beyond the general principles.     

变频器的常见故障分析

本文阐述了变频器的常见故障，并针对常见故障提出了解决措施。     

Operator‐splitting method for the analysis of cavitation in liquid‐lubricated herringbone grooved journal bearings

This paper presents an operator‐splitting method (OSM) for the solution of the universal Reynolds equation. Jakobsson–Floberg–Olsson (JFO) pressure conditions are used to study cavitation in liquid‐lubricated journal bearings. The shear flow component of the oil film is first solved by a modified upwind finite difference method. The solution of the pressure gradient flow component is computed by the Galerkin finite element method. Present OSM solutions for slider bearings are in good agreement with available analytical and experimental results. OSM is then applied to herringbone grooved journal bearings. The film pressure, cavitation areas, load capacity and attitude angle are obtained with JFO pressure conditions. The calculated load capacities are in agreement with available experimental data. However, a detailed comparison of the present results with those predicted using Reynolds pressure conditions shows some differences. The numerical results showed that the load capacity and the critical mass of the journal (linear stability indicator) are higher and the attitude angle is lower than those predicted by Reynolds pressure conditions for cases of high eccentricities. Copyright © 2004 John Wiley & Sons, Ltd.     

Linearized and rational approximation method for solving non‐linear Burgers' equation

A new numerical method called linearized and rational approximation method is presented to solve non‐linear evolution equations. The utility of the method is demonstrated for the case of differentiation of functions involving steep gradients. The solution of Burgers' equation is presented to illustrate the effectiveness of the technique for the solution of non‐linear evolution equations exhibiting nearly discontinuous solutions. Copyright © 2004 John Wiley & Sons, Ltd.