螺栓松动边界下纤维增强复合薄板的振动测试方法

提出了基于预埋压力传感器的量化测试方法,研究了螺栓松动边界对纤维增强复合薄板振动特性的影响。首先,自主设计并开发了带有预埋压力传感器的螺栓松动边界下复合薄板的振动测试系统,并详细介绍了系统各个部件的组成和功能;然后,归纳出一套合理、规范的松动边界下复合薄板的振动测试流程,并对HF10碳纤维/树脂复合薄板进行了实际测试。结果表明:随着螺栓松动程度的不断增加,复合薄板的固有频率逐渐降低,模态振型的节线位置也发生了不同程度的变化,但其阻尼结果呈现先增大后减小的趋势;而共振和非共振响应呈现先减小后增大的趋势。     

Combinational Chemotherapy and Photothermal Therapy Using a Gold Nanorod Platform for Cancer Treatment

Multimodal approaches combined with various nanomaterials and advanced techniques have been developed for synergistic cancer treatment. Among various therapies, conventional chemotherapy (CHT) is a direct cancer treatment that can produce unintended side effects due to nonspecific action on both the tumor and normal cells; patient-friendly photothermal therapy (PTT) may be able to treat embedded tumors in vital regions with minimal invasion but does not guarantee complete removal of cancers. However, the combination of CHT-PTT may provide a promising tool for direct cancer treatment with minimal side effects. In this regard, nanostructured materials, such as gold nanorods with tuned size and surface characteristics, are key components designed to enhance the heating capacity and active or passive delivery of drugs to the tumor site. In this review, the pioneering work synergizing CHT and PTT is summarized, and the current state-of-the-art in the development of inorganic and organic nanocomposites for combinational therapy is described.     

Cu过量对Cu1+x Al1-x O2(0≤x≤0.04)薄膜结构与光电性能的影响

以单相多晶Cu1+x Al1-x O2陶瓷做靶材,采用射频磁控溅射方法在石英衬底上沉积了Cu过量的Cu1+x Al1-x O2(0≤x≤0.04)薄膜.通过X射线衍射(XRD)、紫外吸收光谱以及电导率的测试,表征了不同含Cu量Cu1+x Al1-x O2薄膜的结构与光电性能.结果表明,沉积态薄膜经退火处理后,由非晶转变为具有铜铁矿结构的纯相Cu1+x Al1-x O2;退火态薄膜在可见光区域的平均透过率约为55;,平均可见光透过率不受Cu含量的影响;退火态薄膜样品的室温电导率随Cu含量的增加而增大,Cu1.04 Al0.96 O2的室温电导率最高,为1.22×10-2 S/cm;在近室温区(200～300 K),退火态薄膜均很好地符合Arrhenius热激活模式.     

Blue electroluminescent materials based on indeno[1,2-a]arene derivatives for Organic Light-Emitting Diodes

Abstract

In this study, as a continuous effort for searching efficient blue-emitting materials, we designed and synthesized materials based on indeno[1,2-a]arene. OLED devices using these materials were fabricated in the following sequence; ITO (180?nm)/N,N'-diphenyl-N,N'-(2-napthyl)-(1,1'-phenyl)-4,4'-diamine (NPB) (50?nm)/emitting materials (30?nm)/4,7-diphenyl-1,10-phenanthroline (Bphen) (30?nm)/Liq/Al (2/100?nm). Particularly, a device using 7,7-dimethyl-7H-indeno[1,2-a]pyrene as emitter showed maximum values of luminous efficiency, power efficiency, and external quantum efficiency of 1.10?cd/A, 0.49?lm/W, 1.47% at 20?mA/cm², respectively with CIE (x,y) coordinates of (0.15, 0.08) at 6.0V.     

A STUDY OF LOW CYCLE FATIGUE PROPERTIES OF MATERIALS BASED ON THE FUNNEL-SHEET SPECIMENS1)

根据能量等效方法,针对漏斗薄片试样,提出了关联Ramberg-Osgood 幂律参数、试样几何参数的载荷-位移半解析统一模型。采用有限元数值模拟,正、反向验证了该模型的有效性。在此基础上,提出了通过漏斗薄片试样低循环试验实现材料低周疲劳性能的预测方法。基于薄片试样低循环试验数据,完成了SS316L, N18及SAPH440 三种材料的低周疲劳性能预测,预测结果与标准试样试验结果具有良好的一致性。并利用该方法完成了N18与SAPH在不同温度条件下的低周疲劳性能预测。     

Rh-Catalyzed Kinetic Resolution-Based Enantioselective [4+2]-Cycloaddition-Isomerization of Allene-1,3-dienes

The first example of Rh-catalyzed kinetic resolution of 1,3-disubstituted allene-1,3-dienes involving intramolecular[4+2]-cycloaddition has been developed.Follo...     

溶胶-凝胶法制备丙烯酸树脂/TiO2有机-无机杂化材料及其结构表征

通过预水解的二氧化钛(TiO2 )溶胶与丙烯酸树脂共混或原位聚合的方法制备了均匀透明的丙烯酸树脂 TiO2 有机 无机杂化材料.考察了TiO2 溶胶制备方法、聚合物中—COOH官能团含量和杂化材料制备方法对杂化材料结构的影响.索氏抽提实验表明聚合物中的羧酸官能团和无机TiO2 相间发生了交联反应,且随着—COOH官能团含量的增加,交联程度增大.小角X射线散射(SAXS)结果发现,杂化材料中TiO2 为疏松的三维网状结构,且在纳米尺度范围内,但这种三维网状结构随着TiO2 溶胶制备中水或酸的用量增加,其致密度增加,尺寸增大.同原位聚合法相比,共混法可制备出更均匀的杂化体系,且TiO2 为单分散.     

DNA／聚（3-甲基噻吩）复合膜修饰电极的制备及其应用于研究8-羟基-2＇-脱氧鸟嘌呤核苷的伏安行为及测定

首先通过电聚合方法在玻碳电极表面制备了聚（3-甲基噻吩）（P3MT）修饰膜,然后在一定电位下将DNA分子电沉积到P3MT表面,制备了DNA／（P3MT）复合膜修饰玻碳电极．研究了8-羟基-2’-脱氧鸟嘌呤核苷（8-OH-dG）在该复合膜修饰电极上的伏安行为以及扫描速度、pH值和尿酸对其伏安行为和检测的影响．实验结果表明,该复合膜修饰电极结合了P3MT和DNA两者的优点,使8-OH-dG在复合膜修饰电极上的电化学行为明显改善,而且具有很好的重现性和稳定性．在0．1mol／LpH7．0的磷酸盐缓冲溶液（PBS）中,8-OH-dG的氧化峰电流与其浓度在0．28～4．2μmol／L和4．2～19．6μmol／L两个范围内成良好的线性关系,检出限为56nmol／L（S／N=3）．该研究可以为制备HPLC或毛细管电泳电化学检测器检测8-OH—dG打下一定的基础,因此在检测尿样中8-OH-dG的研究方面具有潜在的应用价值．     

Soft‐Chemical Exfoliation Route to Layered Cobalt Oxide Monolayers and Its Application for Film Deposition and Nanoparticle Synthesis

A colloidal suspension of exfoliated, layered cobalt oxide nanosheets has been synthesized through the intercalation of quaternary tetramethylammonium ions into protonated lithium cobalt oxide. According to atomic force microscopy, exfoliated nanosheets of layered cobalt oxide show a plateau‐like height profile with nanometer‐level height, underscoring the formation of unilamellar 2D nanosheets. The exfoliation of layered cobalt oxide was cross‐confirmed by X‐ray diffraction, UV/Vis spectroscopy, and transmission electron microscopy. The maintenance of the hexagonal in‐plane structure of the cobalt oxide lattice after the exfoliation process was evidenced by selected‐area electron diffraction and Co K‐edge X‐ray absorption near‐edge structure analysis. The zeta‐potential measurements clearly demonstrated the negative surface charge of cobalt oxide nanosheets. Adopting the nanosheets of layered cobalt oxide as a precursor, we were able to prepare the monodisperse CoO nanocrystals with a particle size of ≈10 nm as well as the heterolayered film composed of cobalt oxide monolayer and polycation.