光学偏振实验仿真设计

采用计算机工具软件，成功地设计和编制了偏振现象实验的仿真程序，用于计算机辅助教学     

互补型自适应滤波器在心磁信号处理中的应用

将心磁信号从干扰噪声中加以提取并有效地消除噪声干扰是心磁信号处理中尤为重要的环节 .从改进算法的角度出发，提出互补型自适应滤波器结构以实现心磁信号的消噪处理.该滤波器针对心磁这类非平稳信号进行设计，有效地解决了常规自适应滤波器应用于心磁信号处理时收敛速度和稳态误差的矛盾.通过仿真实验和心磁实验结果表明，该算法能有效地消除心磁信号的背景噪声和工频干扰噪声.同时该算法也可用于其他非平稳信号的消噪处理. 关键词： 自适应滤波 心磁图 最小均方误差     

厚高阶光学非线性介质Z扫描的变分法分析

利用变分法对具有五阶光学非线性介质的Z扫描特性进行了研究。通过比较，发现当介质在具有较大的五阶非线性系数或较大光强的情况下，五阶非线性项的作用是不可忽略的。这对光限制器的设计和Z扫描实验都具有一定的指导意义。     

A NOTE OF THE SPECTRUM OF HOMOGENEOUS COMPACT OPERATORS

In this paper, we present some counterexamples which show that there is no theory on the spectrum of homogeneous compact operators which parallels the Riesz-Schauder theory on the spectrum of linear compact operators. These counterexamples also illustrate that it is impossible to study in a unified setting the Fucik spectrum of the Laplacian: -△w = au+ - bu- inΩand u = 0 on (?)Ω, as well as the spectrum of the p-Laplacian: -div(|(?)u| p-2(?)u) = λ|u|p-2u and u = 0 on (?)Ω.     

A Novel Segmentation and Feedback Model for Resolving Contention in Optical Burst Switching

A novel segmentation and feedback model (SFM) applied to resolve contention is proposed. Simulation and performance analyses show that the SFM effectively avoids contentions in optical burst switching (OBS). The long delay time of deflection routing and the immature technology of wavelength converters and optical buffers are not deployed in the SFM. The SFM does not only realize fast switching but also allows preemption by higher priority bursts.     

Design of photonic crystal fibers for dispersion-related applications

A general procedure for design of photonic crystal fibers (PCFs) with desirable dispersion properties is presented. The design model is based on the combination of a rigorous vector mode solver and a scaling transformation for the dispersion properties of the PCFs. In comparison with the conventional design method, the new design procedure is more efficient and can be readily automated for the purpose of design optimization. Several applications of the design procedure, e.g., the design optimization for dispersion shifted fibers, dispersion flattened fibers, and dispersion compensation fibers, are demonstrated and discussed.     

Mutual coupling of two collocated orthogonally oriented circular thin-wire loops

Coupling between two collocated orthogonal circular thin-wire loops is analyzed in this paper. Two coupled integral equations for the loop currents are derived and their solution in general form is found in terms of Fourier series. An analytical expression for currents induced through the mutual coupling is obtained for the case when all loop current harmonics higher than first can be ignored. It is found that strong coupling can exist for all loop current harmonics, except for the fundamental. It is also found that coupling for orthogonal collocated loop antennas depends on the relative locations of the loop terminals.     

无线光接入技术

无线光通信系统以其高带宽、低成本和安装迅捷等优势成为非常有竞争力的光接入新技术。对无线光通信系统的关键技术、主要优势和存在的问题及国内外相关产品的发展状况和主要特点进行了论述和介绍。     

Hermetic Packaging Using Eutectic SnPb Solder and Cr/Ni/Cu Metallurgy Layer

We have developed an easy, low-cost, and low-temperature optoelectronic hermetic packaging technology utilizing the eutectic SnPb solder and the Cr/Ni/Cu bonding pad. Bonding characteristics of the design were investigated in three different setups: silicon-silicon, silicon-glass, and glass-glass samples. Hermeticity was achieved at 200 degC without flux for all samples during the final bonding process. The bonding pads did not dewet during or after the reflow process. By utilizing the eutectic SnPb solder, the self-alignment process can be achieved. Because the bonding process was conducted through visual alignment, original misalignment was estimated to be more than 100 mum. The surface tension of melting solder during the reflow process allowed the samples to self-align and obtain a misalignment of less than 20 mum after solidification, which was 4% of the entire solder width. The bonding strength of the three setups ranged from 3 to 10 MPa. Among the three setups, glass-glass samples appear to have the strongest bonding strength. This low-temperature and cost-effective soldering process has demonstrated its feasibility and potential utilization in optoelectronic packaging     

Measurement of gain spectrum for Fabry-Perot semiconductor lasers by the Fourier transform method with a deconvolution process

To improve the accuracy of measured gain spectra, which is usually limited by the resolution of the optical spectrum analyzer (OSA), a deconvolution process based on the measured spectrum of a narrow linewidth semiconductor laser is applied in the Fourier transform method. The numerical simulation shows that practical gain spectra can be resumed by the Fourier transform method with the deconvolution process. Taking the OSA resolution to be 0.06, 0.1, and 0.2 nm, the gain-reflectivity product spectra with the difference of about 2% are obtained for a 1550-nm semiconductor laser with the cavity length of 720 /spl mu/m. The spectra obtained by the Fourier transform method without the deconvolution process and the Hakki-Paoli method are presented and compared. The simulation also shows that the Fourier transform method has less sensitivity to noise than the Hakki-Paoli method.