Design model and guidelines for n-well guard ring in epitaxial CMOS

This work reports the development of design model for n-well guard rings in a CMOS process utilizing a low-doped epitaxial layer on a highly doped substrate. The validity of the model has been judged by a wide range of experimental data measured from the fabricated n-well guard ring structures with guard ring width as parameter. From the model developed, guidelines have been drawn to minimize the guard ring width while critically suppressing the amount of electrons escaping from the guard ring     

Effects of hot carrier induced interface state generation insubmicron LDD MOSFET's

A two-dimensional numerical simulation including a new interface state generation model has been developed to study the performance variation of a LDD MOSFET after a dc voltage stress. The spatial distribution of hot carrier induced interface states is calculated with a breaking silicon-hydrogen bond model. Mobility degradation and reduction of conduction charge due to interface traps are considered. A 0.6 μm LDD MOSFET was fabricated. The drain current degradation and the substrate current variation after a stress were characterized to compare the simulation. A reduction of the substrate current at V_g ≃0.5 V_d in a stressed device was observed from both the measurement and the simulation. Our study reveals that the reduction is attributed to a distance between a maximum channel electric field and generated interface states     

The implementation of time-domain diakoptics in the FDTD method

The time-domain diakoptics is implemented in the finite-difference time-domain (FDTD) method with two types of connecting interfaces: i) directional interface (TLM-type), and ii) total-field interface (FDTD-type). The FDTD-type interface provides a more efficient way to realize time-domain diakoptics than TLM, especially for device optimization problems. To emulate the TLM-type interface in FDTD, two novel algorithms are developed in this paper. One is to implement an ultra-wideband absorbing boundary on the excitation plane during excitation. The other is to separate directional waves without the knowledge of incident waves. For a large circuit with cascaded modules, sequential and parallel algorithms are provided to connect them. With these connecting algorithms, time-domain diakoptics is one candidate method to realize modular and parallel computation in FDTD simulations. The validity of these algorithms is confirmed by comparison with simulated results from Microwave SPICE     

Pd-Ge contact to n-GaAs with the TiW diffusion barrier

Pd-Ge based ohmic contact to n-GaAs with a TiW diffusion barrier was investigated. Electrical analysis as well as Auger electron spectroscopy and the scanning electron microscopy were used to study the contact after it was subjected to different furnace and rapid thermal annealing and different aging steps. All analyses show that TiW can act as a good barrier metal for the Au/Ge/Pd/n-GaAs contact system. A value of 1.45 × 10⁻⁶ Ω-cm² for the specific contact resistance was obtained for the Au/TiW/Ge/Pd/n-GaAs contact after it was rapid thermally annealed at 425°C for 90 s. It can withstand a thermal aging at 350°C for 40 h with its ρ_c increasing to 2.94 × 10⁻⁶Ω-cm² and for an aging at 410°C for 40 h with its ρ_c increasing to 1.38 × 10⁻⁵ Ω-cm².     

Evaluation of absorption and emission cross sections of Er-dopedLiNbO3 for application to integrated optic amplifiers

The polarization-dependent absorption and emission spectra of the ⁴I_13/2-⁴I_15/2 transition (λ~1.5 μm) in single crystal bulk Er:LiNbO₃ have been measured. Low-temperature (10 K) measurements of the Stark split energy levels of these two manifolds indicate at least two Er³⁺ sites. McCumber theory is applied to determine the Er:LiNbO₃ absorption and emission cross sections. These values are used to calculate the gain characteristics of Er:LiNbO₃ channel waveguides. Calculations indicate that a gain of 10 dB is achievable in a waveguide of several centimeters using ~20-mW pump power     

Synthesis and characterization of novel thermoresponsive‐co‐biodegradable hydrogels composed of N‐isopropylacrylamide,poly(L‐lactic acid), and dextran

A series of novel multifunctional hydrogels that combined the merits of both thermoresponsive and biodegradable polymeric materials were designed, synthesized, and characterized. The hydrogels were copolymeric networks composed of N‐isopropylacrylamide (NIPAAM) as a thermoresponsive component, poly(L‐lactic acid) (PLLA) as a hydrolytically degradable and hydrophobic component, and dextran as an enzymatically degradable and hydrophilic component. The chemical structures of the hydrogels were characterized by an attenuated total reflection–Fourier transform infrared spectroscopy (ATR–FTIR) technique. The hydrogels were thermoresponsive, showing a lower critical solution temperature (LCST) at approximately 32 °C, and their swelling properties strongly depended on temperature changes, the balance of the hydrophilic/hydrophobic components, and the degradation of the PLLA component. The degradation of the hydrogels caused by hydrolytic cleavage of ester bonds in the PLLA component was faster at 25 °C below the LCST than at 37 °C above the LCST, determined by the ATR–FTIR technique. Due to their multifunctional properties, the designed hydrogels show great potential for biomedical applications, including drug delivery and tissue engineering. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5054–5066, 2004     

Time-Space Label Switching Protocol (TSL-SP)—A New Paradigm of Network Resource Assignment

In this paper we propose a new protocol called time-space label switching protocol (TSL-SP) in optical burst switching (OBS), and define the terms time-space label (TSL) and time-space routing (TSR). An important concept of response time is introduced in the time label mechanism. The TSL-SP is a new technology that can quickly and efficiently forward data with a label on the optical networks. A two-dimension label switched path (TD-LSP) can be set up, that is maintained and deleted by the TSL-SP. For clearly illuminating the operation principles of the TSL-SP, we propose a new approach of orthogonal time-space coordinates in which the vertical coordinate is the space label and the horizontal coordinate is the time label. The proposed TD-LSP can dramatically reduce the routing failure probability and greatly improve the link network efficiency compared with other signaling protocols. Moreover, we define the time-space label control plane that can achieve the higher efficiency. When the TSL-SP is applied to networks, switching performance can be improved by two orders compared to the switching performance with the conventional OBS signaling protocols. The fundamental goal of TSL-SP is to band the signaling and routing functions together closely. Also, the TSL-SP can reduce the complexity of the network, support automatic service offering, and provide traffic engineering.     

基于协方差矩阵变换的相干源个数估计

正确地估计信号源个数是高分辨阵列信号处理的一个重要组成部分,本文提出了一种相干源个数估计的方法。这种方法是先采用空间平滑技术对信号源去相关,然后对阵列协方差进行酉变换,最后用基于协方差矩阵变换的信息论准则和盖氏半径(Gerschgorin Radii)两种方法估计信号源个数。计算机仿真结果证实了方法的可行性。     

Hankel transform-domain analysis of scattered fields in multilayer planar waveguides and lasers with circular gratings

Radiation patterns of scattered fields with arbitrary azimuthal orders in multilayer planar waveguides and laser cavities with circularly symmetric gratings are formulated based on the volume current method. Full-wave Green's function analysis based on the integral transform method lies at the heart of this approach. Unlike the conventional approach, the dyadic Green's function relates some auxiliary fields to some auxiliary sources in the spectral domain. These auxiliary functions are defined to facilitate the spectral domain formulation in the cylindrical coordinate system and the use of transfer matrix method for obtaining a closed-form solution of the spectral Green's function in multilayer planar structures. More importantly, it is shown that the far-field pattern of the scattered field can be expressed directly in terms of the auxiliary fields in the Hankel transform domain.