Perceptually-weighted evaluation criteria for segmentation masks in video sequences

In order to complement subjective evaluation of the quality of segmentation masks, this paper introduces a procedure for automatically assessing this quality. Algorithmically computed figures of merit are proposed. Assuming the existence of a perfect reference mask (ground truth), generated manually or with a reliable procedure over a test set, these figures of merit take into account visually desirable properties of a segmentation mask in order to provide the user with metrics that best quantify the spatial and temporal accuracy of the segmentation masks. For the sake of easy interpretation, results are presented on a peaked signal-to-noise ratio-like logarithmic scale.     

TD-SCDMA系统终端中的GMM功能实体研究

移动性管理(MM,MobilityManagement)是层3的一个子层,它主要完成与用户的移动性相关的一些功能。根据业务的分域划分,MM子层被分为支持CS模式的MM实体和支持PS模式的GMM实体。本文通过对GMM一般过程和特殊过程的描述,介绍了TD-SCDMA系统终端GMM实体的功能及其实现过程。     

天融信逾越中国企业"坎"

从去年年底的一段时间以来,尽管天融信备受外界关注,但除了宣布去年9月在天融信成立十周年之际,具有丰富国际企业运作和管理经验的金玉丹先生出任天融信公司的CEO和今年一月任命韦文为公司CTO以外,天融信通过正面渠道向外界发出的声音似乎并不多,大家听到更多的是通过小道消息或传闻,有人说天融信正在进行人事变动,也有人说天融信正在历经变革与调整,但都未得到正面证实。然而近期天     

SafeNet实现超强安全加密

安全加密产品的领导者SafeNet 公司,近日发布了新一代世界级高安全加密锁产品——圣天狗,以确保软件开发商的知识产权不被非法盗用。圣天狗(Sentinel Dog)是第一个也是唯一一个在市场上采用公钥技术、AES加密和内部验证机制的保护锁。它在提供超强安全加密性能的同时具有弹性化的授权模式。     

The First Template‐Free Growth of Crystalline Silicon Microtubes

A simple template‐free high‐temperature evaporation method was developed for the growth of crystalline Si microtubes for the first time. As‐grown Si microtubes were characterized using X‐ray diffraction, scanning electron microscopy, transmission electron microscopy, and room‐temperature photoluminescence. The lengths of the Si tubes can reach several hundreds of micrometers; some of them have lengths on the order of millimeters. Each tube has a uniform outer diameter along its entire length, and the typical outer diameter is ≈ 2–3 μm. Most of the tubes have a wall thickness of ≈ 400–500 nm, though a considerable number of them exhibit a very thin wall thickness of ≈ 50 nm. Room‐temperature photoluminescence measurement shows the as‐synthesized Si microtubes have two strong emission peaks centered at ≈ 589 nm and ≈ 617 nm and a weak emission peak centered at ≈ 455 nm. A possible mechanism for the formation of these Si tubes is proposed. We believe that the present discovery of the crystalline Si microtubes will promote further experimental studies on their physical properties and smart applications.     

5Gb/s 0.25μm CMOS限幅放大器

采用TSMC 0.25μm CMOS技术设计实现了高速低功耗光纤通信用限幅放大器.该放大器采用有源电感负载技术和放大器直接耦合技术以提高增益,拓展带宽,降低功耗并保持了良好的噪声性能.电路采用3.3V单电源供电,电路增益可达50dB,输入动态范围小于5mVpp,最高工作速率可达7Gb/s,均方根抖动小于0.03UI.此外核心电路功耗小于40mW,芯片面积仅为0.70mm×0.70mm.可满足2.5,3.125和5Gb/s三个速率级的光纤通信系统的要求.     

High-performance MIM capacitor using ALD high-k HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectrics

For the first time, we successfully fabricated and demonstrated high performance metal-insulator-metal (MIM) capacitors with HfO/sub 2/-Al/sub 2/O/sub 3/ laminate dielectric using atomic layer deposition (ALD) technique. Our data indicates that the laminate MIM capacitor can provide high capacitance density of 12.8 fF//spl mu/m/sup 2/ from 10 kHz up to 20 GHz, very low leakage current of 3.2 /spl times/ 10/sup -8/ A/cm/sup 2/ at 3.3 V, small linear voltage coefficient of capacitance of 240 ppm/V together with quadratic one of 1830 ppm/V/sup 2/, temperature coefficient of capacitance of 182 ppm//spl deg/C, and high breakdown field of /spl sim/6 MV/cm as well as promising reliability. As a result, the HfO/sub 2/-Al/sub 2/O/sub 3/ laminate is a very promising candidate for next generation MIM capacitor for radio frequency and mixed signal integrated circuit applications.     

基于对地观测激光回波特征的目标特性研究

本文研究了对地观测激光回波特征与地面目标特征之间的关系模型，分析了分类地面目标的激光回波特征，提出一种基于查表法的目标特性计算方法并给出了仿真结果。     

不同注F剂量与CMOS运放电路辐照损伤的相关性

在不同注F剂量条件下,对P沟和N沟两种不同差分对输入CMOS运放电路的电离辐照响应进行了研究.分析比较了注F和未注F运放电路电离辐照响应之间的差异.结果表明,在栅场介质注入适量的F,可有效抑制辐照感生的氧化物电荷尤其是界面态的增长,从而提高CMOS运放电路的抗辐照特性.     

End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.