应用多抽样率信号处理实现SSB调制信号

在探讨了软件无线电的基本概念,基于软件无线电定义的发射平台结构及多抽样率数字信号处理的基本内容的基础上,着重探讨了软件无线电发射平台中多抽样率数字信号处理的应用,并以单边带调制信号(SSB)为例,指出与传统SSB产生方法不同的结构。     

A comparison of master equation and Fokker-Planck equation in the thermodynamic limit

The master equation and the Fokker-Planck equation are compared thoroughly in both of the stationary and the time-dependent cases for a one-dimensional system. The comparison includes the master equation without detailed balance.     

Semiconductor optical amplifier for CWDM operating over 1540-1620 nm

A semiconductor optical amplifier was developed for coarse wavelength-division-multiplexing (CWDM) operating over 1540-1620 nm (C-L band). A unique quantum-well structure was designed to meet the requirements for the CWDM operation such as wide bandwidth, low polarization-dependent gain, and high-saturation power at the short wavelength end of the band (1540 nm). Over the band, 24-dB maximum chip gain was obtained with less than 4.3-dB gain flatness and more than 14.6-dBm saturation power.     

DC isolation and RF dissipation loss of coplanar waveguide on GaAs multi conductive Layers bombarded by H/sup +/ and Fe/sup +/ ions

This letter explores the dc isolation and radio frequency (RF) dissipation loss of coplanar waveguide (CPW) lines of H/sup +/ and Fe/sup +/ ion bombarded GaAs multi conductive epitaxial layers. It is demonstrated that although a sheet resistivity as high as 10/sup 8/ /spl Omega/sq has been achieved by ion bombardment, showing excellent dc isolation, the RF dissipation loss of gold metallized CPW lines on the bombarded multi conductive epitaxial layers are higher than that on a semi-insulating GaAs substrate, especially at higher frequencies (0.5 dB/cm higher at 50 GHz). This is probably caused by deep level trappings due to the ion bombardment.     

纯生跳跃扩散型交换期权定价公式

在假定标的资产价格服从纯生跳跃过程的条件下,研究一类多资产期权——资产权重不同的交换期权,并在风险中性的条件下建立相应的定价方程,运用条件期望等相关知识得出交换期权的解析公式。文中最后列出一些特殊纯生跳跃扩散型交换期权的定价的例子.     

同步辐射光刻技术

同步辐射光刻有希望代替传统光刻技术,用于0.25μm以下图形的超精细加工。本文叙述了它的原理、相关技术的开发现状和工艺应用。     

Matrix representation of three-dimensional astigmatic resonators

Three-dimensional astigmatic resonators, typical examples of which are the resonators bounded by cylindrical-spherical mirrors and cylindrical-cylindrical mirrors oriented at an arbitrary crossed angle, are investigated in detail by using a complex curvature tensor concept and generalized tensor ABCD law. Computerized numerical calculations illustrate some interesting characteristics of these astigmatic resonators.     

一类非线性发展方程整体弱解的存在性和稳定性

该文考虑一类新的非线性方程(｜ut｜r-2ut)t-Δutt-Δu-ρ(t)Δut=f(u) 的初边值问题，利用小扰动法证明了整体弱解的 存在性，借用位势井的概念得到了解的稳定性.〖HT5”H〗关键词:〖HT5”SS〗非线性发展方程;初边值问题;整体弱解;稳定性.     

级联型多电平逆变器中多载波PWM控制方法的改进

级联型多电平逆变器由于其模块化结构、便于生产高度、更换容易等特点，受到电力电子工程技术人员的广泛关注。本文通过对于级联型多电平逆变器几种典型的控制方法的分析比较，提出了一种改进多载波PWM控制方法。该方法通过改变载波的幅值，使级联逆变器的各个逆变单元开关规律相同，并使所有的开关器件的损耗一致，有利于逆变单元的统一设计和可靠运行。     

Effect of carbon content on the microstructure and the cracking susceptibility of Fe-based laser-clad layer

The laser cladding of Fe-based alloys on a medium carbon steel substrate was performed using a CO₂ laser and Ar shielding gas that was blown into a molten pool. The microstructure and cracking susceptibility of the laser-clad layers were studied in terms of carbon additions. Results show that the small change of the carbon content in the alloy powders can obviously change the microstructure and properties of the layers. When the carbon content is in the range of 0.3–0.4 wt.%, the decrease of the carbon content in alloy powders will increase the hardness and toughness of the layers simultaneously under the same process parameters. As a result, crack-free coatings with high hardness can be obtained. As the carbon content increases from 0.2 wt.% to 0.4 wt.%, the segregation ratio of chromium increases, while the segregation ratios of nickel, manganese, and silicon first decrease and then increase. At the same time, a new designing principle concerning the composition and microstructure has been put forward, and the principal mechanisms of strengthening and toughening of the layers are fine-grain strengthening and low carbon martensitic phase transformation strengthening.