Facile route to high-density, ordered ZnO nanowire arrays and their photoluminescence properties

A simple template-directed wet chemistry route based on traditional thermal decomposition technique has been developed for the preparation of high-density, ordered ZnO nanowire arrays. The fabrication was performed at relative low temperature without involving complex procedures, sophisticated equipment and rigorous experiment conditions, thereby providing a straightforward and mild method to produce metal/metal oxide ordered nanostructures. The nanowire array system was evaluated by SEM, XRD, TEM and PL. A stable luminescence at 425 nm was present.     

Influence of chemistry and hot rolling conditions on high permeability non-grain oriented silicon steel

This paper discusses the influence of chemical composition on the final electromagnetic properties in higher permeability material. Furthermore, the effect of the hot rolling practice and the end of austenite transformation temperature range on the hot band microstructure is described. The magnetic polarization J₅₀₀₀ better than 1.7 T, using hot rolling conditions 40 mm transfer bar thickness, finish mill entry temperature 1000 °C, and finishing temperature 800–840 °C and after decarburization heat treatment and grain growth treatment, was obtained.     

Dominant mode characteristics of circular groove guide

Circular groove guide is a kind of waveguide for millimeter waves with low loss, large dimensions, and low dispersion. In this paper, the dominant mode characteristics of it is analysed. The technique that mode macthing method combines with point matching method is used to derive the Nth-order characteristic equation of the guide. The 1st order, 2nd order and 3rd order approximate curves that the normalized cutoff wavelength of circular groove guide varies with c/a are given. The attenuation curves are given at 1mm, 1.5mm and 3mm wavelength. The numerical results are in well agreement with the experimental results published.     

线圈型全光纤偏振器的研究

本文采用等效电流法对线圈型全光纤偏振器进行了分析计算.对应于保偏光纤中两正交传输基模的消光比,提出了一种分析保偏光纤弯曲损耗的新方法,这种方法基于将保偏光纤两个不同偏振模式分别等效为两个普通圆光纤的基模,等效参数通过测量不同偏振模式的模场半径来确定.实验证明这种理论计算方法与实验结果一致.最终,我们研制出的线圈型光纤偏振器在1.31μm工作波长下,实测消光比达30dB以上,工作偏振模式插入损耗≤3dB.     

突体剖面线型的流噪声机理分析和试验研究

本文在分析突体马蹄涡和湍流脉动压力特性的基础上，在中国船舶科学研究中心０３Ｂ水筒，试验比较了不同剖面线型的突体模型流动噪声，降噪效果３－５ｄＢ，提出了突体部面低噪声设计的实验依据和具体方法。     

NFZ-10工业辐照电子直线加速器

研制的电子直线加速器ＮＦＺ－１０的辐照加工能力相当于３０ＰＢｑ的６０Ｃｏ源，电子束能量为４～１２ＭｅＶ，平均束功率为３ｋＷ，扫描宽度为１ｍ，能量不稳定度≤±０．５％，束流不稳定度≤±０．６％，扫描不均匀度≤±２．５％。ＮＦＺ－１０加速器已被用于辐照各种电力半导体器件，一年多来运行稳定可靠并获得较好的经济效益。     

激光技术推广应用中安全防护问题

论述加强激光安全防护工作的紧迫性,介绍我国激光安全工作的进展,提出下一步工作建议。     

半导体激光泵浦预激光锁模调Q固体激光器研究

报道半导体激光侧面泵浦预激光锁模调Ｑ的Ｎｄ：ＹＡＧ固体板条激光器，预激光锁模调Ｑ的激光脉冲宽度为３６ｐｓ，调Ｑ包纤各心的锁模单脉冲能量超过７μＪ，相应的峰值功率达２００ｋＷ。     

线性时滞系统实用稳定性的一个简明判据

利用比较的方法，获得了线性时滞系统实用稳定性的一个简单判定定理．     

分布耦合系数对线性啁啾光栅色散的影响

本文从光栅反向耦合波方程出发,经相位共轭变换用Runge-Kuta-Gil方法对其数值求解。针对线性啁啾光栅耦合系数变化服从不同的分布,分析了各种分布对光栅反射谱特性和色散特性的影响。