Formation of different gold nanocrystal core-resin shell structures through the control of the core assembly and shell polymerization

The formation of different Au nanocrystal core-resin shell structures through the control of the nanocrystal assembly and shell polymerization is investigated. 4-Mercaptophenol is employed together with formaldehyde as the resin monomers. 4-Mercaptophenol molecules bond to the surface of Au nanocrystals so that the resultant phenolic resin can intimately encapsulate Au nanocrystals. The morphologies of the obtained structures are determined by the nanocrystal assembly and the monomer polymerization behaviors, which are controlled by the solution pH as well as the monomer amounts. At pH = 8-9, Au nanorods are assembled and fused together under hydrothermal conditions in a preferential end-to-end manner. The fused structures are coated with a layer of resin, with the thickness controlled by the supplied amounts of the monomers. At pH = ～10, Au nanorods are coated with resin of controllable thicknesses and separated from each other. The resin-coated Au nanorods are stable in both aqueous and nonaqueous solutions. At pH = ～12, Au nanorods are coated with a thin layer of resin and assembled together in a side-by-side manner. A similar assembly and resin coating behavior is also observed with Au nanopolyhedrons. Moreover, plasmonic-fluorescent bifunctional structures are readily produced by incorporating CdTe nanocrystals in the resin shell that is coated on Au nanocrystals, owing to the presence of a number of thiol groups in the resin shell.     

Breathing Effect in a Cobalt Phosphonate upon Dehydration/Rehydration: A Single‐Crystal‐to‐Single‐Crystal Study

Two cobalt phosphonates, [Co₂(2,2′‐bpy)₂(H₂O)(pbtcH)] ( 1 ) and [Co₂(H₂O)(pbtcH)(phen)₂] ( 2 ; pbtcH₅=5‐phosphonatophenyl‐1,2,4‐tricarboxylic acid, 2,2′‐bpy=2,2′‐bipyridine, phen=1,10‐phenanthroline), with layer structures are reported. Compound 1 contains O‐C‐O and O‐P‐O bridged tetramers of Co₄, which are further connected by pbtcH^4? units to form a layer. In compound 2 , the cobalt tetramers made up of water‐bridged Co₂ dimers and O‐P‐O linkages are connected into a layer by pbtcH^4? units. Upon dehydration, compounds 1 and 2 experience single‐crystal‐to‐single‐crystal (SC–SC) structural transformations to form [Co₂(2,2′‐bpy)₂(pbtcH)] ( 1 a ) and [Co₂(pbtcH)(phen)₂] ( 2 a ), respectively. The process is reversible in each case. Notably, a breathing effect is observed for 1 , accompanied by pore opening and closing due to the reorientation of the coordinated 2,2′‐bpy molecules. The transformation was also monitored by in situ IR measurements. Magnetic studies reveal that antiferromagnetic interactions are mediated between the magnetic centers in compounds 1 and 1 a , whereas ferromagnetic interactions are dominant in compound 2 .     

Lithium adduct as precursor ion for sensitive and rapid quantification of 20 (S)‐protopanaxadiol in rat plasma by liquid chromatography/quadrupole linear ion trap mass spectrometry and application to rat pharmacokinetic study

A novel, rapid and sensitive liquid chromatography/quadrupole linear ion trap mass spectrometry [LC‐ESI‐(QqLIT)MS/MS] method was developed and validated for the quantification of protopanaxadiol (PPD) in rat plasma. Oleanolic acid (OA) was used as internal standard (IS). A simple protein precipitation based on acetonitrile (ACN) was employed. Chromatographic separation was performed on a Sepax GP‐C₁₈ column (50 × 2.1 mm, 5 μM) with a mobile phase consisting of ACN–water and 1.5 μM formic acid and 25 mM lithium acetate (90 : 10, v/v) at a flow rate of 0.4 ml/min for 3.0 min. Multiple‐reaction‐monitoring mode was performed using lithium adduct ion as precursor ion of m/z 467.5/449.4 and 455.6/407.4 for the drug and IS, respectively. Calibration curve was recovered over a concentration range of 0.5–100 ng/ml with a correlation coefficient >0.99. The limit of detection was 0.2 ng/ml in rat plasma for PPD. The results of the intraday and interday precision and accuracy studies were well within the acceptable limits. The validated method was successfully applied to investigate the pharmacokinetic study of PPD after intravenous and gavage administration to rat. Copyright © 2013 John Wiley & Sons, Ltd.     

Syntheses,Structures, and Properties of Two New Tri‐spin Lanthanide‐Nitronyl Nitroxide (LnIII = GdIII and HoIII) Complexes

Abstract. Two radical–Ln^III–radical complexes, [Ln(hfac)₃(NITPh‐Ph)₂] [Ln = Gd ( 1 ) and Ho ( 2 ), hfac = hexafluoroacetylacetonate; and NITPh‐Ph = 4′‐biphenyl‐4, 4, 5, 5‐tetramethylimidazoline‐1‐oxyl‐3‐oxide] were synthesized and characterized by X‐ray diffraction, elemental analysis, magnetic measurements, as well as IR and UV/Vis spectroscopy. X‐ray crystal structure analysis revealed that the structures of both complexes are isomorphous, the central Ln^III ions are coordinated by six oxygen atoms from three hfac ligand molecules and two oxygen atoms from nitronyl radicals. The temperature dependencies of the magnetic susceptibilities were studied. They showed that in the Gd^III complex, ferromagnetic interactions between Gd^III and the radicals and antiferromagnetic interactions between the radicals coexist in this system (with J_Rad–Gd = 0.1 cm^–1, J_Rad–Rad = –0.309 cm^–1).     

溴酸钾氧化亮绿SF催化光度法测定痕量亚硝酸根

本文基于亚硝酸根对溴酸钾氧化亮绿ＳＦ而使其褪色所起的催化作用，建立了高灵敏度催化吸光光度法测定痕量亚硝酸根的新方法，测定范围为０．０５－２０ｎｇ／ｍｌ，用于不同水样中亚硝酸根的测定，获得了满意结果。     

X-射线荧光分析散射幂函数法原理及其应用I·RhKα相干散射平方法

本文发现6~40号元素对能量为20keV的X_射线的质量吸收系数和质量相干散射系数之间呈二次幂函数关系,并据此提出了X_射线荧光定量分析校正基体效应的新方法——RhKa相干散射平方法.用国家标准物质GBW对该原理进行了验证.本法用于硅酸盐地质样品中微量元素的测定取得令人满意的结果.     

16-脱氢孕烯醇酮醋酸酯的环境友好合成法

Instead of environmentally toxic chromium oxidant, singlet oxygen generated photcchemically was used as environmentally friendly and benign oxidizing agent to accomplish the transformation of pseudodiosgenin diacetate to diosone efficiently in a low toxic and less expensive solvent acetone. Accordingly 16-dehydropregnenolone acetate(16-DPA), an important intermediate for preparation of steroidal drugs, was prepared in good yield (75%) when photoreaction was run in acetone/acetic anhydride/pyridine system. The mild reaction condition as well as simple and environmentally friendly process made the method commercially viable and important for production of 16-DPA in industrial scale.     

Like (CO)4, Do (CS)4 and (CSe)4 Have a Triplet Ground State?

Cyclobutane‐1,2,3,4‐tetraone, (CO)₄, was computationally predicted and, subsequently, experimentally confirmed to have a triplet ground state, in which a b_2g σ MO and an a_2u π MO were each singly occupied. In contrast, the (U)CCSD(T) calculations reported herein found that cyclobutane‐1,2,3,4‐tetrathione, (CS)₄, and cyclobutane‐1,2,3,4‐tetraselenone, (CSe)₄, both had singlet ground states, in which the b_2g σ MO was doubly occupied and the a_2u π MO was empty. Our calculations showed that both the longer C?X distances and smaller coefficients on the carbon atoms in the b_2g and a_2u MOs of (CS)₄ and (CSe)₄ contributed to the difference between the ground states of these two molecules and the ground state of (CO)₄. An experimental test of the prediction of a singlet ground state for (CS)₄ is proposed.