0.25μm CMOS千兆以太网发送器设计

分析了千兆以太网体系结构,给出了符合IEEE 802.3z标准中1000BASE-X规范的发送器电路结构,并采用TSMC 0.25 μm CMOS 混合信号工艺设计了符合该规范的高速复接电路和锁相环时钟倍频电路.芯片核心电路面积分别为(0.3×0.26)mm2和(0.22×0.12)mm2.工作电压2.5 V时,芯片核心电路功耗分别为120 mW和100 mW.时钟倍频电路的10倍频输出时钟信号频率为1.25 GHz,其偏离中心频率1MHz处的单边带相位噪声仅为-109.7 dBc/Hz.在驱动50 Ω输出负载的条件下,1.25 Gbit/s的高速输出数据信号摆幅可达到410 mV.     

基于非均匀星座的改进ARQ方案及其性能分析

本文针对调制阶数大于4的MPSK和MQAM调制，在重传中采用非均匀星座图和符号比特重新排序，提出了一种改进的ARQ方案。通过对AWGN信道下ARQ方案进行理论分析和数值仿真，表明基于非均匀星座的新方案在信道条件较差时能有效地提高重要比特的可靠性，若重传中结合符号比特重排和分组合并，则可使接收端解调合并后的比特可靠性趋于均匀且总体得到提高，从而有效地减少重传次数，提高系统的吞吐率。由于本文所提方案并不改变调制解调规则和数据分组长度，故容易实现和控制。     

恩格尔系数衡量城镇居民生活水平适用性

根据我固1980年和2000年恩格尔系数所反映的各省(市)居民生活水平资料，发现两个不同时期其真实性有很大差异，分析了造成这种差别的原因：(1)职工非现金福利收入的增加；(2)少数职工的非法收入的大量增加；(3)居民饮食结构的改变；(4)物价上涨的影响；(5)恩格尔系数本身存在技术问题；(6)抽样调查本身存在问题，提出用一种“新系数”来衡量城镇居民生活水平，其优点是：(1)不受各地区实际支出，即人为控制调节的影响；(2)不需用其他指标作解释，直观性强；(3)因可以扣除物价因素，它不受物价波动的影响；（4)调查户填报和计算简易方便。可扩大样本调查量，提高反映住户总量可靠性。     

Surface Gravity on the Horizon of η- ξ Spacetime

We investigate the two methods of defining the surface gravity ,κ on the horizon, which are the metric definition and the definition given by the spacetime conformal method. It is found that the latter is of greater generality. By this method, we find that ,κ of η- ξ spacetime is equal to the exponent factor α in the coordinate transformation, which confirms the argument that η- ξ spacetime can be considered as the background spacetime for finitetemperature field theories. The reasons why the metric definition of ,κ can not be applied in η- ξ spacetime are presented.     

Verification of submodeling technique in thermomechanical reliability assessment of flip-chip package assembly

In this paper we verified the submodeling technique applied in the thermomechanical reliability assessment of a flip-chip BGA under accelerated thermal cycling test conditions. Since the steady-state creep model was implemented for the solder bump to better represent its realistic mechanical behavior, submodeling procedures developed specifically for path-dependent thermomechanical problems were considered. A detailed global model for the flip-chip BGA was built up to verify submodeling solutions. This model also served as a benchmark to examine solution discrepancies caused by different simplifications of the global model.     

Preparation and Selectivity of Molecularly Imprinted Polymer Coating on the Micro Pore Membrane of Polytetrafluoroethylene

In order to obtain mechanically stable membrane for practical application, the imprinted polymer was synthesized in the pores of polyfluoromembrane, the binding and transport ability of the membrane were studied.     

传感技术与RFID在血液管理分析中的运用

由于血液管理对于环境条件的特殊要求，针对血液管理分析提出了将传感技术与RFID技术结合后应用于其中的想法。简要介绍了RFID传感器标签的设计，分析了将其运用于血液管理分析后对加强流程监控、提高工作效率的好处，并主要从血液的出入库管理、跟踪管理、质控管理三个方面详细描述，阐明了方法的可行性。     

一种有机电致发光共聚物的制备和性能

采用Suzuki方法合成了9，9-二辛基芴与萘并硒二唑的两种无规共聚物并研究了其紫外光谱、光致发光和电致发光性能。两种聚合物的电致发光波长为650～666nm，均为发饱和红光的LED材料，其电致发光外量子效率最高达到了1．05％。随着共聚物中萘并硒二唑含量的增加，共聚物的光致发光和电致发光的发射波长均有少量红移。证明了根据共轭高聚物链内能量转移原理，在聚芴链中引入不同含量的窄带隙杂环单元可实现对聚芴发光颜色的调节。     

Internet中的物理资源

对Internet中的物理资源进行了较系统的介绍，主要内容有：综合物理网站、物理期刊网站和物理教学网站，其中重点介绍了美国和欧洲主要国家的物理网站和物理期刊网站，利用这些物理站点，可以方便的进行文献检索、物理会议查询，物理教学相关资料的查询和世界各大学物理系的查询；可以方便快捷的了解当今世界各国的物理教学学科研的最新进展，文中对各个物理站点的使用方法都一一做了详细的介绍，以方便读者使用。     

Study on the Binding Characteristic of S-Naproxen Imprinted Polymer and the Interactions between Templates and Monomers

S-naproxen imprinted polymer was prepared with acrylamide as a functional monomer, 1,4-butanediyl diacrylate as a new kind of crossliner, and 2,4,6-trimethylbenzoylphenyl-phosphinic acid ethyl ester as photoinitiator. Their UV and IR spectra were applied to study the interactions between the template and the monomer. Binding experiments showed that the S-naproxen imprinted polymer had better recognition capability for the template than that of a blank polymer. The adsorption distribution coefficient KD of S-naproxen on molecularly-imprinted polymer was 153.2 g/mL, and the separation factor was 1.95 when the initial concentration of substrate was 2.0 mmol/L. Scatchard curves suggested that there were two classes of binding sites in the imprinted polymer and only one class in the blank polymer. Computer simulation using Hyperchem showed the existence of the interactions between the template and the functional monomer as well as the models of the complexes formed by the template and the monomer.