有序自组装聚合物纳米结构

采用水辅助方法(water-assisted fabrication method),分别以4-十二烷基苯磺酸掺杂的聚苯胺(PANI-DBSA)和聚2-甲氧基-5-(2′-乙烯基-己氧基)苯乙炔(MEH-PPV)两种功能高聚物为成膜材料,冷凝水滴为模板,利用水滴在聚合物溶液表面的自组装,制备出了两种纳米层次以上的蜂窝状有序多孔聚合物薄膜.通过原子力显微镜和共聚焦荧光显微镜对其形貌、电学性质和荧光图像进行了表征.     

Synthesis of new trans double-bond sphingolipid analogues: Delta(4,6) and Delta(6) ceramides

Unsaturation was introduced at Delta(4,6) and Delta(6) of the sphingoid chain of naturally occurring ceramide 1 via a beta-keto sulfoxide (12) and sulfone (18) derived from N-Boc-L-serine methyl ester acetonide (9), affording two novel ceramide analogues, (2S,3R)-2-octanoylamidooctadeca-(4E,6E)-diene-1,3-diol (2) and (2S,3R)-2-octanoylamidooctadec-(6E)-ene-1,3-diol (3). After C-alkylation of 12 with (E)-1-bromo-2-tetradecene (8), a trans double bond was installed by elimination of PhS(O)H, providing conjugated dienone oxazolidine 13. Reaction of 18 with 8, followed by desulfonation (Al(Hg)), afforded keto-oxazolidine 20, which bears a (E)-Delta(6) double bond. The syntheses of analogues 2 and 3 from ketones 13 and 20, respectively, were completed by the following sequence of reactions: diastereoselective reduction (NaBH(4)/CeCl(3) or DIBAL-H), hydrolysis of the oxazolidine ring, liberation of the amino group, and installation of the N-amide group.     

Composite Electrode SnO2／TiO2 for Dye-Sensitized Solar Cells

Composite nanoporous electrode SnO2/TiO2 was fabricated for the dye sensitized solar cell (DSSC) with N3 (Cis-Ru). After introducing of TiO2, the open-circuit photovoltage (Voc) was higher than that of the pure SnO2 electrode, while short-circuit photocurrent (Isc) was varied with the ratio of the TiO2. Appropriate content of the TiO2 can be beneficial to the efficiency of the solar cell, and it gives negative impact on the composite electrode when the content of TiO2 is higher.     

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe,Ru, and Os; R=H and CH3)

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.     

窄分布聚丙烯酸-g-聚甲基丙烯酸酯接枝共聚物的合成

利用合成的一种新型原子转移自由基聚合大分子引发剂和从主干接枝的方法制备了窄分布的两亲性接枝共聚物聚丙烯酸-g-聚甲基丙烯酸酯, 并对其结构进行表征. 产物主链和侧链的分子量可分别通过调整单体与引发剂的投料比和反应时间进行控制, 结构规整, 侧链单体适用范围广. 该合成方法不仅推动了接枝共聚物合成研究的进展, 其产物更为两亲性接枝共聚物自组装行为的研究提供了很好的研究对象.     

Synthesis and Mesogenic Properties of Liquid Crystals Containing Terminal Cyclohexylmethanol,Cyclopentylmethanol, Cyclobutylmethanol and Cyclopropylmethanol Moiety

Four series of compounds 11?50 containing terminal alicyclic rings such as cyclohexylmethyl, cyclopentylmethyl, cyclobutylmethyl, and cyclopropylmethyl rings were synthesized and their liquid crystal behavior studied. The ring size and the length of flexible alkoxy chain influence the phase formation in different ways. While the smaller ring and the shorter alkoxy chain tend to favor the formation of the N phase, the larger ring and the longer alkoxy chain tend to favor the formation of the SmC phase. All the compounds except 11 and 21 exhibit SmA phases. The widest temperature range of the N, SmA, and SmC phases are found in the compounds 41 , 46 , and 20 , respectively, which are 75 °C for 41 , 115 °C for 46 , and 100 °C for 20 .     

Thermodynamic molecular switch in sequence‐specific hydrophobic interactions

This communication will demonstrate the existence of a thermodynamic molecular switch in the pairwise, sequence‐specific hydrophobic interaction of Ile–Ile, Leu–Ile, Val–Leu, or Ala–Leu over the temperature range of 273–333 K reported by Nemethy and Scheraga in 1962. Based on Chun's development of the Planck–Benzinger methodology, the change in inherent chemical bond energy at 0 K, ΔH°(T₀), is 3.0 kcal mol^?1 for Ile–Ile, 2.4 for Leu–Ile, 1.8 for Val–Leu, and 1.2 kcal mol^?1 for Ala–Leu. The value of ΔH°(T₀) decreases as the length of the hydrophobic side chain decreases. It is clear that the strength and stability of the hydrophobic interaction is determined by the packing density of the side chains, with Ala–Leu being the most stable. At 〈T_m〉, the thermal agitation energy, $\int^{T}_{0}\Delta Cp^{\circ}(T)\,dT$, is about five times greater than ΔH°(T₀) in each case. Additionally, the thermal agitation energy for the same series, evaluated at 〈T_m〉, decreases in the same order, that is, as the length of the side chain decreases. This pairwise, sequence‐specific hydrophobic interaction is highly similar in its thermodynamic behavior to that of other biological systems, except that the negative Gibbs free energy change minimum at 〈T_s〉 occurs at a considerably higher temperature, 355 K compared to about 300 K. The melting temperature, 〈T_m〉, is also high, 470 K compared to 343 K in a biological system. The implication is that the negative Gibbs free energy minimum at a well‐defined 〈T_s〉 has it origin in the hydrophobic interactions, which are highly dependent on details of molecular structure. In addition to the four specific dipeptide interactions described, we have shown in our unpublished work the existence of a thermodynamic molecular switch in the interactions of 32 dipeptides wherein a change of sign in ΔCp°(T)_reaction leads to a true negative minimum in the Gibbs free energy of reaction, and hence, a maximum in the related K_eq. Indeed, all interacting biological systems that we have thus far examined using the Planck–Benzinger approach point to the universality of thermodynamic molecular switches. © 2001 John Wiley & Sons, Inc. Int J Quantum Chem, 2001     

Kinetic investigation of the textile bleaching process

Volumetric H₂-uptake measurements on an Mo₂N (79 m²g^–1) sample reduced at 673 K have been carried out and the uptake isotherms in the temperature range of 308–623 K have been determined. Both the total and reversible hydrogen uptake increased with the uptake temperature. The irreversible hydrogen uptake increased abruptly when the uptake temperature was raised up to 423 K. The maximum of irreversible hydrogen uptake was measured at 473 K. The H_IR/Mo ratio calculated from the uptakes obtained in the temperature range of 308–623 K varies in the range of 0.0010–0.0202. One possible mechanism for hydrogen adsorption is proposed to be heterolytic dissociation on Mo-N paris, in which the molybdenum atoms are in unsaturated coordination.     

水中矿物元素的ICP-MS分析

用ICP－MS对地下水、地表水和饮用水中的矿物元素进行了分析测定，实验证明用ICP－MS可以同时测定地下水，地表水和饮用水中矿物元素；该法灵敏度、精密度和准确度都能满足有关标准的要求，具有多元素同时分析，样品前处理简单，干扰少，测定快速，省事省力等优点。     

Efficient dehalogenation of polyhalomethanes and production of strong acids in aqueous environments: water-catalyzed O--H-insertion and HI-elimination reactions of isodiiodomethane (CH2I-I) with water

A combined experimental and theoretical study of the ultraviolet photolysis of CH2I2 in water is reported. Ultraviolet photolysis of low concentrations of CH2I2 in water was experimentally observed to lead to almost complete conversion into CH2(OH)2 and 2HI products. Picosecond time-resolved resonance Raman spectroscopy experiments in mixed water/acetonitrile solvents (25%-75% water) showed that appreciable amounts of isodiiodomethane (CH2I-I) were formed within several picoseconds and the decay of the CH2I-I species became substantially shorter with increasing water concentration, suggesting that CH2I-I may be reacting with water. Ab initio calculations demonstrate the CH2I-I species is able to react readily with water via a water-catalyzed O--H-insertion and HI-elimination reaction followed by its CH2I(OH) product undergoing a further water-catalyzed HI-elimination reaction to make a H2C=O product. These HI-elimination reactions produce the two HI leaving groups observed experimentally and the H2C=O product further reacts with water to produce the other final CH2(OH)2 product observed in the photochemistry experiments. These results suggest that CH2I-I is the species that reacts with water to produce the CH2(OH)2 and 2HI products seen in the photochemistry experiments. The present study demonstrates that ultraviolet photolysis of CH2I2 at low concentration leads to efficient dehalogenation and release of multiple strong acid (HI) leaving groups. Some possible ramifications for the decomposition of polyhalomethanes and halomethanols in aqueous environments as well as the photochemistry of polyhalomethanes in the natural environment are briefly discussed.