Skin-like Omnidirectional Stretchable Platform with Negative Poisson's Ratio for Wearable Strain–Pressure Simultaneous Sensor

Conventional elastomeric polymers used as substrates for wearable platforms have large positive Poisson's ratios (≈0.5) that cause a deformation mismatch with human skin that is multidirectionally elongated under bending of joints. This causes practical problems in elastomer-based wearable devices, such as delamination and detachment, leading to poorly reliable functionality. To overcome this issue, auxetic-structured mechanical reinforcement with glass fibers is applied to the elastomeric film, resulting in a negative Poisson's ratio (NPR), which is a skin-like stretchable substrate (SLSS). Several parameters for determining the materials and geometrical dimensions of the auxetic-structured reinforcing fillers are considered to maximize the NPR. Based on numerical simulation and digital image correlation analysis, the deformation tendencies and strain distribution of the SLSS are investigated and compared with those of the pristine elastomeric substrate. Owing to the strain-localization characteristics, an independent strain-pressure sensing system is fabricated using SLSS with a Ag-based elastomeric ink and a carbon nanotube-based force-sensitive resistor. Finally, it is demonstrated that the SLSS-based sensor platform can be applied as a wearable device to monitor the physical burden on the wrist in real time.     

Implementation of mmWave long-range backhaul for UAV-BS

Uncrewed aerial vehicles (UAVs) have become a vital element in nonterrestrial networks, especially with respect to 5G communication systems and beyond. The use of UAVs in support of 4G/5G base station (uncrewed aerial vehicle base station [UAV-BS]) has proven to be a practical solution for extending cellular network services to areas where conventional infrastructures are unavailable. In this study, we introduce a UAV-BS system that utilizes a high-capacity wireless backhaul operating in millimeter-wave frequency bands. This system can achieve a maximum throughput of 1.3 Gbps while delivering data at a rate of 300 Mbps, even at distances of 10 km. We also present the details of our testbed implementation alongside the performance results obtained from field tests.     

Phytochemicals from Echinacea and Hypericum: A Direct Synthesis of Isoligularone

Reaction of trienes with α,β-unsaturated aldehydes produces bicyclic products via a tandem Diels-Alder/ene reaction. The adduct from tiglic aldehyde was converted into isoligularone by conversion to a furan followed by benzylic oxidation.     

Phosphorylation of phospholipase D1 and the modulation of its interaction with RhoA by cAMP-dependent protein kinase

Agents that elevate cellular cAMP are known to inhibit the activation of phospholipase D (PLD). We investigated whether PLD can be phosphorylated by cAMP-dependent protein kinase (PKA) and PKA-mediated phosphorylation affects the interaction between PLD and RhoA, a membrane regulator of PLD. PLD1, but not PLD2 was found to be phosphorylated in vivo by the treatment of dibutyryl cAMP (dbcAMP) and in vitro by PKA. PKA inhibitor (KT5720) abolished the dbcAMP-induced phosphorylation of PLD1, but dibutyryl cGMP (dbcGMP) failed to phosphorylate PLD1. The association between PLD1 and Val14RhoA in an immunoprecipitation assay was abolished by both dbcAMP and dbcGMP. Moreover, RhoA but not PLD1 was dissociated from the membrane to the cytosolic fraction in dbcAMP-treated cells. These results suggest that both PLD1 and RhoA are phosphorylated by PKA and the interaction between PLD1 and RhoA is inhibited by the phosphorylation of RhoA rather than by the phosphorylation of PLD1.     

Synthesis of pyrene and benzo[a]pyrene adducts at the exocyclic amino groups of 2'-deoxyadenosine and 2'-deoxyguanosine by a palladium-mediated C-N bond-formation strategy

Single-electron oxidation of the carcinogenic hydrocarbon benzo[a]pyrene (BaP) is thought to result in a radical cation intermediate and this species has been proposed to cause alkylation at the nitrogens of the purine nucleobases. Although several different nucleoside adducts have been isolated as arising from this mode of metabolic activation, there are no selective, total syntheses of the stable exocyclic amino group adducts formed by the single-electron oxidation of any hydrocarbon with the purine 2'-deoxynucleosides to date. In this paper we disclose the synthesis of the model adducts N(6)-(1-pyrenyl)-2'-deoxyadenosine and N(2)-(1-pyrenyl)-2'-deoxyguanosine as well as the first synthesis of the carcinogen-linked nucleoside derivatives N(6)-(6-benzo[a]pyrenyl)-2'-deoxyadenosine and N(2)-(6-benzo[a]pyrenyl)-2'-deoxyguanosine via a palladium-mediated C-N bond formation. Two different coupling strategies were attempted: coupling of an aryl bromide with a suitably protected nucleoside and the coupling of an arylamine with a suitable halonucleoside. The former had somewhat limited applicability in that only N(6)-(1-pyrenyl)-2'-deoxyadenosine was prepared by this method; on the other hand, the latter was more general. However, there are noteworthy differences in the amination reactions at the C-6 and C-2 positions. Reactions at the C-6 resulted in the competing formation of a 1:2 amine-nucleoside adduct in addition to the desired monoaryl nucleoside. Such a dimer formation was not observed at the C-2. The C-2 adducts, however, displayed an interesting conformational behavior.     

Condensation reaction of 3-(methacryloxypropyl)-trimethoxysilane and diisobutylsilanediol in non-hydrolytic sol-gel process

The condensation reaction of 3-methacryloxypropyl-trimethoxysilane (MPTS) and diisobutylsilanediol (DIBSD) in a non-hydrolytic sol-gel process was investigated in terms of the reaction time and the catalyst amount for fabrication of inorganic-organic hybrid materials. The degree of condensation, which was characterized by ²⁹Si NMR, ¹H NMR and Abbe refractometry, increases with increased the reaction time and greater catalyst amount. However, a the large catalyst amount breaks the methacryl group during the condensation reaction. Thus, the reaction time and the catalyst amount were optimized to synthesize the condensed methacryl oligosiloxanes.     

Facile deposition of [60]fullerene and carbon nanotubes on ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene

It was found that [60]fullerene encapsulated in p-sulfonatocalix[8]arene and single-walled carbon nanotubes (SWNTs) solubilized by sodium dodecylsulfate can be readily deposited on the ITO electrode by electrochemical oxidative polymerization of ethylenedioxythiophene (EDOT) without chemical modification of these carbon clusters. The driving force for the deposition is an electrostatic interaction between the anionic complexes and the cationic charges of poly(EDOT) formed in the oxidative polymerization process. The surface morphology was thoroughly characterized by scanning electron micrograph: the [60]fullerene/poly(EDOT) film is covered by nano-particles with 20-100 nm diameters whereas the SWNTs/poly(EDOT) film is covered by nanorods with several microm length and ca. 100 nm diameter. The results indicate that the anionic complexes act as nuclei for the polymer growth in the oxidation polymerization. Interestingly, when these modified ITO electrodes were photoirradiated, the appearance of a photocurrent wave was observed. The action spectra showed that the photoexcited energy of [60]fullerene or SWNTs is efficiently collected by the electroconductive poly(EDOT) film and transferred to the ITO electrode.     

Ionizing radiation induces blockade of c-Jun N-terminal kinase-dependent cell death pathway in a manner correlated with p21(Cip/WAF1) induction in primary cultured normal human fibroblasts

During radiotherapy of cancer, neighboring normal cells may receive sub-lethal doses of radiation. To investigate whether such low levels of radiation modulate normal cell responses to death stimuli, primary cultured human fibroblasts were exposed to various doses of gamma-rays. Analysis of cell viability using an exclusion dye propidium iodide revealed that the irradiation up to 10 Gy killed the fibroblasts only to a minimal extent. In contrast, the cells efficiently lost their viability when exposed to 0.5-0.65 mM H(2)O(2). This type of cell death was accompanied by JNK activation, and was reversed by the use of a JNK-specific inhibitor SP600125. Interestingly, H(2)O(2) failed to kill the fibroblasts when these cells were pre-irradiated, 24 h before H(2)O(2) treatment, with 0.25-0.5 Gy of gamma-rays. These cytoprotective doses of gamma-rays did not enhance cellular capacity to degrade H(2)O(2), but elevated cellular levels of p21(Cip/WAF1), a p53 target that can suppress H(2)O(2)-induced cell death by blocking JNK activation. Consistently, H(2)O(2)-induced JNK activation was dramatically suppressed in the pre-irradiated cells. The overall data suggests that ionizing radiation can impart normal fibroblasts with a survival advantage against oxidative stress by blocking the process leading to JNK activation.     

Synthesis and phase relations in the system with garnet-type composition: [Ca1.5GdCe0.5]VIII[ZrFe]VI[Fe x Al3? x ]IVO12

This study was aimed at the synthesis, study of phase relations and characterization of the garnet ([Ca_1.5GdCe_0.5]^VIII[ZrFe]^VI[Fe _x Al_3−x ]^IVO₁₂, x = 0−2) intended as promising matrix for actinides (Pu) immobilization. The optimum temperatures of the fabrication of the garnets ceramics are 1400 °C at x = 2 and 1500 °C at x = 0−1. The garnets lattice parameters and the content of Ce, as an imitator of Pu, increased with the content of iron. It was suggested that the ability of the garnet for incorporation of Pu was closely related to the ionic radii of the elements occupied the four-and six-coordinated sites of the structure.