Magnetic/Conducting Hybrid Compound Composed of 1-D Chain [Mn2Cl5(EtOH)]∞ and BEDT-TTF Stacking Layer

An assembled compound (BEDT-TTF)₂[Mn₂Cl₅(EtOH)] (1) consisting of two structural lattices of Mn(II)-Cl one-dimensional (1-D) chains and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) stacking layers was synthesized by electrochemical crystallization. Compound 1 crystallized in triclinic space group P-1 (#2) with a=13.1628(5) Å, b=20.3985(9) Å, c=7.4966(3) Å, α=98.3498(8)°, β=104.980(1)°, γ=74.602(2)°, V=1868.3(1) ų, and Z=2. The 1-D chains and the stacking layers are aligned along the c-axis of the unit cell. The 1-D chain is described as [Mn₂Cl₅(EtOH)]_∞⁻ in which two Mn(II) ions and four Cl⁻ ions form a ladder-like chain with Kagomé (cuboidal) sublattices, and the remaining Cl⁻ ion and an ethanol molecule cap the edge-positioned Mn(II) ions of the chains. The BEDT-TTF molecules are packed between the Mn-Cl chains (ac-plane), the intermolecular S·S contacts of which are approximately found in the range 3.440(2)-3.599(2) Å. The packing feature of BEDT-TTF molecules is very similar to that of (BEDT-TTF)₂ClO₄(TCE)_0.5 (TCE=1,1,2-trichloroethane) (J. Am. Chem. Soc., 105, 297 (1983)). Regarding the electronic state of each BEDT-TTF molecule, Raman spectroscopic analysis and ESR study revealed the presence of half-valence BEDT-TTF molecules (charge delocalization) in 1. Magnetic measurements clearly demonstrated that the paramagnetic spins on the 1-D chain [Mn₂Cl₅(EtOH)]_∞⁻ arrange antiferromagnetically in the low-temperature region. Additionally, 1 exhibits metallic conductivity in the temperature range 2.0-300 K (σ=21 S cm⁻¹ at 300 K and 1719 S cm⁻¹ at 2.0 K), due to the contribution of the stacked BEDT-TTFs. Consequently, these peculiarities that correspond to antiferromagnetic/metallic conductivity demonstrate the “bi-functionality” of 1.     

Room-temperature phosphorimetric determination of biogenic indole compounds adsorbed on a thin-layer chromatographic plate

A simple and sensitive method is described for the determination of biogenic indole compounds adsorbed on cellulose or alumina plates for thin-layer chromatography by room-temperature phosphorimetry. The optimum conditions were investigated for 5-hydroxyindole-3-acetic acid and indole-3-acetic acid. The compounds are spotted on the plates, which are then sprayed successively with sodium citrate or sodium acetate, and sodiu iodide solutions. The plates are dried completely under a stream of dry nitrogen, and immediately dipped in molten paraffin. The phosphorescence is stable for at least 3 h even in moist air. The limits of detection for nine biogenic indole compounds tested are between 2 and 300 pmol per sample spot.     

Enantioselective Synthesis of 3,4‐Dihydropyran‐2‐ones by Domino Michael Addition and Lactonization with New Asymmetric Organocatalysts: Cinchona‐Alkaloid‐Derived Chiral Quaternary Ammonium Phenoxides

Chiral quaternary ammonium phenoxides were readily prepared from commercially available cinchona alkaloids and proved to be useful new asymmetric organocatalysts. Among various chiral quaternary ammonium phenoxides, a cinchonidine‐derived catalyst that bears both a sterically hindered N1‐9‐anthracenylmethyl group and a strongly electron withdrawing 9‐O‐3,5‐bis(trifluoromethyl)benzyl group were found to be highly effective for the Michael addition of ketene silyl acetals (derived from phenyl carboxylates) and α,β‐unsaturated ketones followed by lactonization. Optically active 3,4‐dihydropyran‐2‐one derivatives were obtained in high yields with excellent control of enantio‐ and diastereoselectivity. This catalyst can be handled in air and stored at room temperature in a sealed bottle without decomposition for at least one month.     

Kinetic and ESR studies on the radical polymerization of Di-n-butyl itaconate in benzene

The polymerization of di-n-butyl itaconate (DBI) intiated with AIBN was kinetically investigated in benezene. The polymerization rate (R_p) was expressed by: R_p = k[AIBN]^0.5[DBI]^1.7. The polymerization showed a considerably low overall activation energy of 15.3 kcal/mol. The initiator efficiency of AIBN in this system decreased with increasing DBI concentration, ranging from 0.34 to 0.55°C, which is ascribable to viscosity effect due to the monomer. From an ESR study, the polymerization system was found to involve two kinds of persistent radicals, namely, primary propagating ( III ) and propagating ( I ) radicals. The relative concentration of III to I increased with decreasing monomer concentration. Azo-nitrile initiators such as AVN and ACN similarly produced two persistent radicals, while MAIB, DBPO, and PBO yielded only propagating radical I as persistent. The MAIB-initiated polymerization of DBI was also performed in benzene. Similar kinetic features were observed, that is, a higher dependence of R_p on the DBI concentration and a low overall activation energy (14.4 kcal/mol). The following rate equation was obtained at 50°C:R_p = k[MAIB]^0.5[DBI]^1.6. The initiator efficiency of MAIB decreased with increasing DBI concentration, ranging from 0.32 to 0.53 at 50°C. The concentration of propagating radical I was determined by ESR at 50 and 61°C, from which k_p and k_t were estimated. The k_p value increased with increasing monomer concentration, while the k_t one decreased with the DBI concentration. These values are much lower compared with those of MMA.     

Studies on orally active cephalosporin esters. II. Chemical stability of pivaloyloxymethyl esters in phosphate buffer solution

The degradation kinetics of pivaloyloxymethyl (POM) esters of cephalosporins in phosphate buffer solution (pH 6-8) were investigated. The degradation of the starting delta 3 cephalosporin ester proceeded mainly via isomerization to the delta 2 ester and subsequent hydrolysis to the delta 2 acid. Hydrolysis to the delta 3 acid (the parent acid) was very slow. Analysis of the rate constants indicated that the isomerization rate k12 was approximately equal to the apparent degradation rate of the delta 3 ester kdeg, and slower than the hydrolysis rate of the delta 2 ester k24. The isomerization process to the delta 2 ester was found to be the rate-determining step in the degradation of cephalosporin esters. The substituent at the C-3 position of the cephalosporins affected the degradation kinetics. The degradation was accelerated by increase of pH, buffer concentration and added protein.     

Studies on orally active cephalosporin esters. III. Effect of the 3-substituent on the chemical stability of pivaloyloxymethyl esters in phosphate buffer solution

The effect of substituents at the C-3 position on the degradation kinetics of the pivaloyloxymethyl (POM) ester of delta 3 cephalosporin in phosphate buffer solution (pH 6-8) was investigated. In the degradation, the isomerization process to the delta 2 ester was the rate-determining step. In this study, the logarithm of the isomerization rate to the delta 2 ester (log k12) correlated with the carbon-13 nuclear magnetic resonance chemical shift difference value at C-3 and C-4 of the delta 3 ester (delta delta (4-3)). The energy level of the lowest unoccupied molecular orbital (LUMO) of the delta 3 esters also correlated with log k12. The electronic properties at the C-2 position had no effect on the isomerization reaction. On the other hand, the logarithm of the isomerization rate back to the delta 3 ester (log k21) correlated with the van der Waals volume (MV) of the 3-substituent. These results show that the substituent at the C-3 position influences mainly the electronic structure of the conjugated pi-bond system (C3 = C4 - C4 = O) and consequently affects the feasibility of isomerization to the delta 2 ester, i.e., the stability to degradation.     

Facile and chemo-selective synthesis of tertiary alkyl isothiocyanates from alcohols

When tert-alcohols were treated with (COOH)₂ and NaSCN in the presence of iodine, tertiary alkyl isothiocyanates were obtained in good yield, whereas the corresponding thiocyanates were obtained in low yield in the absence of iodine.     

Preparation and photochromic properties of oligomeric poly(dimethylsiloxane) with the spiropyran or spirooxazine moiety in the side chain

Spirobenzopyran 1 , with the 3-(diethoxymethylsilyl)-propyl group at the N atom, was synthesized. The condensation reaction of the spiropyran 1 and diethoxydimethylsilane gave oligomeric poly(dimethylsiloxane) with the spiropyran moiety in the side chain. The oligomer was photochromic; its colour changed from colorless to purple-red on uv irradiation and the color faded on visible irradiation or on standing in the dark. The half-decay time of the thermal decoloration was about twice that of monomeric spiropyran dissolved in the dimethylsiloxane oligomer. Photochromic poly(dimethylsiloxane) with the spirooxazine moiety in the side chain was also prepared.     

Determination of l-lactate by differential pulse polarography with covalently immobilized enzyme on Chitopearl

Summary The covalent bonding of l-lactate oxidase (no E.C.) to cross-linked copolymers of chitosan (Chitopearl) using the glutaraldehyde method is described and applied to the determination of l-lactate in serums of diseased and normal animals. The bioreactor packing of the immobilized enzyme is stable for at least 4 months and can be continuously used for the rapid and simple determination of l-lactate. The reduction current of pyruvate, corresponding to the product of enzymatic reaction, is determined by differential pulse polarography. The reproducibility (RSD) for 10 mol/l l-lactate is 0.78% (n=6) and the detection limit is 0.62 mol/l (k=2, confidence level 97.72%).