Solvent replacement to thermo‐responsive nanoparticles from long‐subchain hyperbranched PSt grafted with PNIPAM for encapsulation

Long‐subchain hyperbranched polystyrene (lsc‐hp PSt) with uniform subchain length was obtained through copper‐catalyzed azide‐alkyne cycloaddition click chemistry from seesaw macromonomer of PSt having one alkynyl group anchored at the chain centre and two azido group attached to both chain ends [alkynyl‐(PSt‐N₃)₂]. After precipitation fraction, different portions of lsc‐hp PSt having narrow overall molecular weight distribution were obtained for further grafting with alkynyl‐capped poly(N‐isopropylacrylamide) (alkynyl‐PNIPAM), which was obtained via single‐electron transfer living radical polymerization of NIPAM with propargyl 2‐bromoisobutyrate as the initiator and grafted onto the peripheral azido groups of lsc‐hp PSt via click chemistry. Thus, amphiphilic lsc‐hp PSt grafted with PNIPAM chains (lsc‐hp PSt‐g‐PNIPAM) was obtained and would have star‐like conformation in tetrahydrofuran (THF). By replacing THF with water, lsc‐hp PSt‐g‐PNIPAM was dissolved at molecular level in aqueous solution due to the hydrophilicity of PNIPAM and exhibited thermal induced shrinkage of PNIPAM arms. The water‐insoluble lsc‐hp PSt would collapse densely and could be served as a reservoir to absorb hydrophobic chemicals in aqueous solution. The influence of overall molecular weight of lsc‐hp PSt on the absorption of pyrene was studied. © 2013 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Brush macro‐RAFT agent mediated dispersion polymerization of styrene in the alcohol/water mixture

Dispersion RAFT polymerization of styrene in the alcohol/water mixture mediated with the brush macro‐RAFT agent of poly[poly(ethylene oxide) methyl ether vinylphenyl‐co‐styrene] trithiocarbonate [P(mPEGV‐co‐St)‐TTC] with similar molecular weight but different chemical composition is investigated. Well‐controlled RAFT polymerization including an initial slow homogeneous polymerization and a subsequent fast heterogeneous polymerization at almost complete monomer conversion is achieved. The molecular weight of the synthesized block copolymer increases linearly with the monomer conversion, and the polydispersity is relatively narrow (PDI < 1.3). The RAFT polymerization kinetics is dependent on the chemical composition in the brush macro‐RAFT agents, and those with high content of hydrophobic segment lead to fast RAFT polymerization. The growth of the block copolymer nano‐objects during the RAFT polymerization is explored, and various block copolymer nano‐objects such as nanospheres, worms, vesicles and large‐compound‐micelle‐like particles are prepared. The parameters such as the chemical composition in the brush macro‐RAFT agent, the chain length of the solvatophobic block, the concentration of the feeding monomer and the solvent character affecting the size and morphology of the block copolymer nano‐objects are investigated. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3177–3190     

A UFLC‐MS/MS method with a switching ionization mode for simultaneous quantitation of polygalaxanthone III,four ginsenosides and tumulosic acid in rat plasma: application to a comparative pharmacokinetic study in normal and Alzheimer's disease rats

A fast, sensitive and reliable ultra fast liquid chromatography‐tandem mass spectrometry (UFLC‐MS/MS) method has been developed and validated for simultaneous quantitation of polygalaxanthone III (POL), ginsenoside Rb1 (GRb1), ginsenoside Rd (GRd), ginsenoside Re (GRe), ginsenoside Rg1 (GRg1) and tumulosic acid (TUM) in rat plasma after oral administration of Kai‐Xin‐San, which plays an important role for the treatment of Alzheimer's disease (AD). The plasma samples were extracted by liquid–liquid extraction using ethyl acetate–isopropanol (1:1, v/v) with salidrdoside as internal standard (IS). Good chromatographic separation was achieved using gradient elution with the mobile phase consisting of methanol and 0.01% acetic acid in water. The tandem mass spectrometric detection was performed in multiple reaction monitoring mode on 4000Q UFLC‐MS/MS system with turbo ion spray source in a negative and positive switching ionization mode. The lower limits of quantification were 0.2–1.5 ng/ml for all the analytes. Both intra‐day and inter‐day precision and accuracy of analytes were well within acceptance criteria (±15%). The mean absolute extraction recoveries of analytes and IS from rat plasma were all more than 60.0%. The validated method has been successfully applied to comparing pharmacokinetic profiles of analytes in normal and AD rat plasma. The results indicated that no significant differences in pharmacokinetic parameters of GRe, GRg1 and TUM were observed between the two groups, while the absorption of POL and GRd in AD group were significantly higher than those in normal group; moreover, the GRb1 absorbed more rapidly in model group. The different characters of pharmacokinetics might be caused by pharmacological effects of the analytes. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and characterization of side chain cholesteric liquid crystalline elastomers derived from chiral bisolefinic crosslinking units

In this work we prepared a nematic monomer (4′‐allyloxybiphenyl 4′‐ethoxybenzoate, M₁ ), a chiral crosslinking agent (isosorbide 4‐allyloxybenzoyl bisate, M₂ ) and a series of new side chain cholesteric liquid crystalline elastomers derived from M₁ and M₂ . The chemical structures of the monomers and polymers were confirmed by FTIR and ¹H NMR spectroscopy. The mesomorphic properties were investigated by differential scanning calorimetry, thermogravimetric analysis, polarizing optical microscopy and X‐ray diffraction. The effect of the content of the crosslinking unit on phase behaviour of the elastomers is discussed. Polymer P₁ showed a nematic phase, P₂ –P₇ showed a cholesteric phase; P₆ formed a blue Grandjean texture over a broad temperature range 145–209.6°C, with no changed on the cooling. Polymers P₄ –P₇ , with more than 6?mol?% of chiral crosslinking agent, gave rise to selective reflection. Elastomers containing less than 15?mol?% of the crosslinking units displayed elasticity, reversible phase transition with wide mesophase temperature ranges, and high thermal stability. Experimental results demonstrated that, with increasing content of crosslinking agent, the glass transition temperatures first fell and then increased; the isotropization temperatures and mesophase temperature ranges decreased.     

Synthesis and optical behaviour of hydrogen-bonded liquid crystals based on a chiral pyridine derivative

Three series of cholesteryl-containing supramolecular hydrogen-bonded (H-bonded) liquid crystal (LC) complexes with different number of fluoro-substituent were synthesised and characterised. Cholesteryl isonicotinate as proton acceptor and 4-n-alkoxybenzoic acids with or without fluoro-substituent as proton donor had been mixed in tetrahydrofuran to obtain H-bonded LC complexes. The effect of lateral substitution and the length of terminal chain in the H-bonded precursors on the formation of the supramolecular complexes had been examined. It was found that the introduction of fluoro substituent on the induced mesogens could widen the molecular width and thus reduce the molecular aspect ratio of the complexes, therefore it could lead to compress the formation of the LCs. However, the fluoro substituent played a positive role in enhancing the intermolecular interactions and stabilising the H-bond structure of the complexes. The influence of terminal length on the mesogenic behaviours is also discussed. On increasing the spacer length, the clear point and the thermal range of induced mesophase-like cholesteric phase decreased, and an induced chiral smectic phase began to appear in some complexes with long terminal tails.     

Studies on Carbohydrates X. A New Method for the Preparation of Isopropylidene Saccharides

Cabohydrates reacting with acetone in the presence of molecular sieve and p—toluene sulfonic acid provided a simple, convenient, high yield and good selective process for preparation of isopropylidene carbohydrates.     

The Chromatographic Analysis of Reduced Sulfur Gases in Antarctic Waters Following Pre-Concentration onto Tenax

Abstract

A technique was developed using sparging and pre-concentration onto a Tenax trap at ambient temperature allowing field measurements to be made of reduced sulfur gases in Antarctic marine and glacial melt waters. Following thermal desorption, gases were determined by gas chromatography using a flame photometric detector. Detection limits in ng 1^?1 were: H₂S 50, OCS 8, SO₂ 160, CH₃SH 6, CH₃SCH₃ 20 and CS₂ 2. Storage of melt water samples for more than 24 hours resulted in concentration changes of the reduced sulfur gases present. While the Antarctic environment imposed limitations on the analytical method, an investigation of various pond and marine waters was undertaken.     

Dispersive liquid–liquid microextraction followed by high-performance liquid chromatography for the determination of three carbamate pesticides in water samples

A simple, rapid and efficient method, dispersive liquid–liquid microextraction (DLLME) in conjunction with high-performance liquid chromatography (HPLC), has been developed for the determination of three carbamate pesticides (methomyl, carbofuran and carbaryl) in water samples. In this extraction process, a mixture of 35 µL chlorobenzene (extraction solvent) and 1.0 mL acetonitrile (disperser solvent) was rapidly injected into the 5.0 mL aqueous sample containing the analytes. After centrifuging (5 min at 4000 rpm), the fine droplets of chlorobenzene were sedimented in the bottom of the conical test tube. Sedimented phase (20 µL) was injected into the HPLC for analysis. Some important parameters, such as kind and volume of extraction and disperser solvent, extraction time and salt addition were investigated and optimised. Under the optimum extraction condition, the enrichment factors and extraction recoveries ranged from 148% to 189% and 74.2% to 94.4%, respectively. The methods yielded a linear range in the concentration from 1 to 1000 µg L^?1 for carbofuran and carbaryl, 5 to 1000 µg L^?1 for methomyl, and the limits of detection were 0.5, 0.9 and 0.1 µg L^?1, respectively. The relative standard deviations (RSD) for the extraction of 500 µg L^?1 carbamate pesticides were in the range of 1.8–4.6% (n = 6). This method could be successfully applied for the determination of carbamate pesticides in tap water, river water and rain water.     

Monoester Copillar[5]arenes: Synthesis,Unusual Self‐Inclusion Behavior,and Molecular Recognition

The self‐inclusion behavior of monoester copillar[5]arenes depends on the position of the ester group, which causes different guest selectivities. Monoester copillar[5]arenes bearing an acetate chain can form stable self‐inclusion complexes in low‐ and high‐concentration solution and exhibit high guest selectivity. However, a monoester copillar[5]arene bearing a butyrate chain can not form a self‐inclusion complex and exhibits low guest selectivity. Thus, a new class of stable self‐inclusion complexes of copillar[5]arenes was explored to improve the selectivity of molecular recognition.     

Raman and UV-visible absorption spectra of ion-paired aggregates of copper porphyrins

Raman and UV-visible absorption spectra of ion-paired aggregate constructed from two copper porphyrins, copper tetrakis(4-N-methylpyridyl)porphyrin (CuTMPyP) and copper tetrakis(4-sulfonatophenyl)pophyrin (CuTSPP), are reported in this paper. The absorption bands of the aggregate was found exhibiting obvious shift and broadening, which are attributed to the excitonic coupling between the two paired porphyrin rings. The excitonic coupling in the aggregates also induces evident alteration for Raman intensities compared with monomer spectrum. Aggregation results in only small shifts (2-3 cm(-1)) for Raman lines connecting with the vibrations of porphyrin rings, manifesting only slight structural change of porphyrin skeletons. On the other hand, evident downshift (5 cm(-1)) was observed for the Cm-pyridyl stretch mode (1254 cm(-1)) of CuTMPyP, suggesting weakening of the Cm-pyridyl bonds by aggregation. Raman depolarization ratios of the aggregates are different from those of the monomers, implying a lowering of effective symmetry due to the molecular packing in the aggregates.