Highly enantiomerically enriched chlorophosphine boranes: synthesis and applications as P-chirogenic electrophilic blocks

The stereoselective synthesis of P-chirogenic chlorophosphine boranes 4 was investigated by HCl acidolysis of the corresponding aminophosphine boranes 10. The reaction afforded the P-N bond cleavage with inversion of the configuration at the phosphorus center, leading to the chlorophosphine boranes 4 with high to excellent enantiomeric purities (80-99% ee), except in the case of the chloro-1-naphthylphenylphosphine borane 4d. Reaction conditions and workup significantly influence the enantiomeric purity of the product, with the exception of the o-anisyl- and o-tolylchlorophenylphosphine boranes, 4b and 4c, which were found to be particularly stable even after purification by chromatography on silica gel. Reaction of the chlorophosphine boranes 4 with various nucleophiles, such as carbanions, phenolates, thiophenolates, or amides, afforded the corresponding organophosphorus borane complexes via P-C, P-O, P-S, and P-N bond formation, respectively, in 34-93% yield and with up to 99% ee. This work demonstrates the importance of chlorophosphine boranes 4 as new and powerful electrophilic building blocks for the highly stereoselective synthesis of P-chirogenic organophosphorus compounds.     

Effects of process severity on the chemical structure of Miscanthus ethanol organosolv lignin

Ethanol organosolv lignin extracted from Miscanthus × giganteus with differing levels of severity (1.75 < CS<2.8) were subjected to comprehensive structural characterization by ¹³C, ³¹P NMR, FTIR spectroscopy and gel permeation chromatography. The results were compared to those from milled wood lignin from the same feedstock. The results showed that an increase in the severity of the treatment enhanced the dehydration reactions on the side chain and the condensation of lignin, increased the concentration of phenol groups and decreased the molecular mass of lignin fragments. It appeared that for the experimental conditions generally employed the cleavage of α-aryl ether bonds is primarily reaction responsible for lignin depolymerization under the organosolv conditions examined.     

Composition of essential oils in subterranean organs of three species of Valeriana L

Essential oils from the subterranean organs of three species of Valeriana L. from Iran (Valeriana sisymbriifolia Vahl, Valeriana alliariifolia Adams and Valeriana officinalis L.) belonging to Valerianaceae family have been obtained by hydrodistillation and analysed by gas chromatography-mass spectrometry in order to discern the differences and similarities between the volatile chemical compositions of these species. More than 100 components were identified in essential oils of the studied plants (Supplementary Table S1--online only). The principal common constituents of the three species of Valeriana were spathulenol, limonene, γ-terpinene, vulgarone B and p-cymene. The main essential oil ingredients were α-selinene (7.83%) in V. sisymbriifolia, limonene (3.53%) in V. alliariifolia and spathulenol (13.33%), α-campholenal (11.48%), vulgarone B (8.38%) and valerenal (8.32%) in V. officinalis plants. Ageratochromene (precocene II), a chromene substance with antibacterial, antifungal, insecticidal and antijuvenile hormonal activities, was found at high levels (35.59% and 36.58%) in the essential oils of V. sisymbriifolia plants.     

Hemolytic and Antimicrobial Activities Differ Among Saponin-rich Extracts From Guar, Quillaja, Yucca, and Soybean

Hemolytic and antibacterial activities of eight serial concentrations ranged from 5-666 µg/mL of saponin-rich extracts from guar meal (GM), quillaja, yucca, and soybean were tested in 96-well plates and read by enzyme-linked immunosorbent assay plate-well as 650 nm. Hemolytic assay used a 1% suspension of chicken red blood cells with water and phosphate buffered saline as positive and negative controls, respectively. Antibacterial activity against Staphylococcus aureus, Salmonella typhimurium, and Escherichia coli were evaluated using ampicillin and bacteria without saponin-rich extract as positive and negative controls, respectively. The 100% MeOH GM and commercial quillaja saponin-rich extracts were significantly the highest in both hemolytic and antibacterial activities against all bacteria at the same concentration tested. Soybean saponin-rich extract had no antibacterial activity against any of the bacteria at the concentrations tested while yucca saponin-rich extract had no antibacterial activity against the gram-negative bacteria at the concentrations tested. GM and quillaja saponin-rich extracts were hemolytic, while yucca and soybean saponin-rich extracts were not hemolytic at the concentrations tested. No saponin-rich extract source had antibacterial activity against S. typhimurium or E. coli at the concentrations tested. Both GM and quillaja saponin-rich extracts exhibited antibacterial activity against S. aureus. Saponin-rich extracts from different plant sources have different hemolytic and antibacterial activities.     

Aromatic poly(amide-ether)s containing naphthalene and methylene unites

1,5-Naphthene dioxy diacetic acid was synthesized from the reaction of 1,5-naphthalene diol and chloroacetic acid. It was used then as a bi-functiona l monomer in polycondensation reaction with aromatic diamines in the presence of tripnenylphosphite to produce poly(amide-ether)s. All the obtained polymers were characterized by IR and elemental analysis; their solubility behaviour was evaluated in polar organic solvents as well as in concentrated H₂SO₄. The extent of thermal stability and phase transitions of poly(amide- ether)s were investigated by thermogravimetric analysis and differential scanning calorimetry respectively; while the morphology was estimated by X-ray powder diffraction patterns. Besides, the fu-fu stacking character of polymer chain interactions in the solid state was confirmed by absorption spectra of solid thin films.     

Evaluation of a Vancomycin-Based LC Column in Enantiomeric Separation of Atenolol: Method Development, Repeatability Study and Enantiomeric Impurity Determination

An LC method was developed and validated for the enantioselective separation and enantiomeric impurity quantitation of atenolol. Separation of the atenolol enantiomers on the Chirobiotic V2 (150 mm × 4.6 mm, 5 μm) column was best achieved using a ternary mobile phase of methanol–acetonitrile-triethylamine acetate 0.5% (w/v), pH 4.5 in a ratio of (45:50:5; v/v/v). Good resolution value of R _s  = 3 was obtained at a flow rate of 1 mL min^?1 within a total run time of less than 40 min. Peak identification was achieved using the standard reference of individual enantiomers. The peak of the impurity was eluted in front of the peak of the main enantiomer. Detection was performed by UV at 226 nm. Within and between day’s repeatabilities for both retention time and peak area were investigated at three concentration levels and found to be low. The method was also found to be efficient for the determination of atenolol enantiomeric impurity. An impurity quantitation level of (R)-atenolol down to 0.08% relative to the main enantiomer (S)-atenolol was found possible.     

Methyl Methacrylate–Ethyleneglycol Dimethacrylate–Acrylic Acid Surface as Stationary Phase for Stir Bar Sorptive Extraction

A novel poly(methyl methacrylate–ethyleneglycol dimethacrylate–acrylic acid) film has been introduced for coating on stir bars to sorptive extraction (SBSE). The effects of different contents of porogen, monomer, cross-linker, modifier and initiator during the solvent or bulk polymerization step on the mechanical property and solvent resistant of prepared sorptive stir bars were investigated. The evaluation of results were caused to obtain the four prepared sorptive stir bars with good mechanical stability and excellent resistance to organic solvents. The extraction efficiency of these prepared sorptive stir bars were investigated by liquid desorption-liquid chromatography-ultraviolet detection (LD-LC-UV) using N-Nitrosodiphenylamine as target analyte. SBSE assays showed the sorptive stir bar that prepared using solution polymerization method had the better recovery for N-Nitrosodiphenylamine in water samples. This sorptive stir bar showed good linearity and acceptable recoveries, as well as advantages such as sensitivity, simplicity, low cost and high feasibility. Based on atomic force microscopy (AFM) results, the average pore size of optimum prepared stir bar using solvent polymerization method was obtained ~9 nm. The thermal gravity (TG) and differential scanning calorimetric (DSC) results showed this polyacrylate film has high thermal stability.     

Synthesis of 2-(4,6-dimethoxy-1,3,5-triazin-2-yloxyimino) derivatives: application in solution peptide synthesis

A new class of 1,3,5-triazinyloxyimino derivatives were prepared, characterized and tested for reactivity in solution peptide synthesis. The new triazinyloxyimino derivatives failed to activate the carboxyl group during formation of peptide bonds, but gave the corresponding N-triazinyl amino acid derivatives as a major product. The oxyma (ethyl 2-cyano-2-(hydroxyimino)acetate) uronium salt was superior to other uronium salts in terms of racemization, while 2-chloro-4,6-dimethoxy-1,3,5-triazine (CDMT, 9) gave the best results.     

Photo-oxidation of 5-acetyl-3,4-dihydropyrimidin-2(1H)-ones

A variety of Biginelli 5-acetyl-3,4-dihydropyrimidin-2(1H)-ones are efficiently oxidized to their corresponding pyrimidin-2(1H)-one derivatives upon UV irradiation under argon atmosphere in chloroform solution. The nature of the additional substituent on the phenyl ring located on C-4 of the heterocyclic ring influences the rate of reaction. An electron-transfer induced photoreaction is proposed based on the formation of HCl and CH₂Cl₂.     

Equilibrium and kinetic investigation of the interaction of model palladium(II) complex with biorelevant ligands

Pd(DME)Cl₂ complex was synthesized and characterized, where DME is 2‐{[2‐(dimethylamino)ethyl]‐methylamino}ethanol. Stoichiometry and stability constants of the complexes formed between various biologically relevant ligands (amino acids, peptides, DNA constituents, and dicarboxylic acids) and [Pd(DME)(H₂O)₂]²⁺ are investigated at 25°C and at constant 0.1 M ionic strength. The effect of dielectric constant of the medium on the stability constant of Pd(DME)‐CBDCA complex, where CBDCA is cyclobutanedicarboxylate, is also reported. The concentration distribution diagrams of the various species formed are evaluated. The kinetics of base hydrolysis of amino acid esters coordinated to Pd(DME)²⁺ complex is investigated. The effect of the temperature on the kinetics of base hydrolysis of glycine methyl ester complex is studied. © 2010 Wiley Periodicals, Inc. Int J Chem Kinet 42: 608–618, 2010