Distinction between supercoiled and linear DNA in transverse agarose pore gradient gel electrophoresis.

Four species of linear DNA and the first four members of a linking series, generated by treatment of plasmid DNA (PUC19, 2.7 kb) with mitochondrial topoisomerase I, were differentiated by transverse agarose pore gradient gel electrophoresis. The experimental curves of migration distance vs. agarose concentration (Ferguson curves) of supercoiled DNA exhibit a steeper trajectory than those of linear DNA of the same size range. As a consequence, the four supercoiled species exhibit an increase in apparent size (relative to linear DNA standards) with increasing agarose concentration. Both the crossing of the Ferguson curves with those of linear standards as well as the apparent size increase with agarose concentration can serve to detect supercoiled plasmid-sized DNA in mixtures with linear DNA.     

催化褪色光度法测定微量锰（Ⅱ）的研究

本文研究在硫酸介质中，锰（Ⅱ）催化ＥＤＴＡ还原重铬酸银，而使之褪色的新指示反应。确定了催化褪色反应动力学条件，锰（Ⅱ）的浓度在０－０．４μｇ／ｍｌ范围内，工作曲线呈良好的线性关系，检测限为０．０１１μｇ／ｍＬ，该方法用于天然水及污水中锰的测定，获得满意结果。     

预处理条件对Zn/Al-CLM的丙烷芳构化性能的影响

在脉冲微反装置上考察了不同的预处理条件对Zn/Al-CLM催化剂的丙烷芳构化反应的影响。结果表明，丙烷在Zn/Al-CLM催化剂上具有一定的的反应活性和芳烃选择性，而且芳构化主要转化为苯；载体Al-CLM的焙烧温度、金属锌负载量、活化温度等对Zn/Al-CLM催化剂的丙烷芳构化性能具有重要影响。载体经500℃预焙烧制备的Zn/Al-CLM催化剂具有最好的柱结构保留度，从而表现出最佳的芳构化性能；随着锌含量的增加，Zn/Al-CLM催化剂的酸量增大，从而使丙烷转化率增大，而选择性则是锌含量质量分数为5．8％时具有极大值；400℃活化处理可使Zn与Al-CLM之间具有适中的相互作用，从而使得Zn/Al-CLM具有较高的芳烃收率。     

First alkyl radical additions to (eta(6)-arene)tricarbonylmanganese complexes

[reaction: see text] Reactions of alkylmercury chlorides with arene manganese tricarbonyl complexes in the presence of NaI led to the formation of the addition-reduction products. The mechanism was postulated to be the alkyl radical addition to ArMn(CO)3+ cation to form the corresponding 17 valence electron intermediate, which was then reduced by alkylmercury chloride via a singlet electron transfer process to afford the product and regenerate an alkyl radical.     

溶胶—凝胶合成（Mg,Ca）O—SiO2：Eu^3＋,Bi^3＋发光体及其发光行为

以Ｍｇ（ＮＯ３）２，Ｃａ（ＮＯ３）２，Ｅｕ（ＮＯ３）３，Ｂｉ（ＮＯ３）３和Ｓｉ（ＯＣ２Ｈ５）４为反应物，采用溶胶－凝胶法，在比较低的温度，首次合成０．７０１ｍｏｌＭｇＯ－０．１７５ｍｏｌＣａＯ－１．２５ｍｏｌＳｉＯ２：０．０６ｍｏｌＥｕ＾３＋，０．００２ｍｏｌＢｉ＾３＋（加入Ｌｉ＾＋作为电荷补偿剂）发光体，得到了最佳合成条件，研究了由溶胶向凝胶转变和凝胶向发光晶体的转变过程，探讨了发光体在不同激光     

人工神经网络X射线荧光光谱法测定钢中酸溶铝

建立了一种人工神经网络-X射线荧光光谱法测定钢中酸溶铝的方法，用X射线荧光光谱法测定低合金钢中总铝值，应用所建立的ANN-BP网络模型，输入总铝含量直接预测出酸溶铝含量。同时使用改进的BP算法，避免了神经网络学习中可能产生的麻痹现象。该方法用于钢中酸溶铝的测定，结果满意。     

稀土对耐候钢夹杂物的变质和耐蚀性能的影响

通过金相光学显微镜、扫描电镜及能谱仪,金相定量图象分析仪、非水电解分离夹杂 ICP方法分析固溶稀土含量、电化学腐蚀性能等分析测试手段研究了稀土在耐候钢中存在的形式、非金属夹杂物的形态、尺寸、分布及对耐蚀性能的影响.     

脱氧核糖核酸在汞膜电极上的电化学行为

首次在汞膜电极上利用循环安，微分脉冲和交流伏安法研究脱氧核糖核酸（ＤＮＡ）的电化学行为，结果表明汞膜电极作为一类固体电极可应用于负电位区ＤＮＡ电化学行为的研究。同时结合凝胶电泳和ＵＶ光谱法，研究了用纯高氯酸处理的ＤＮＡ的氧化还原特性，结果表明纯高氯酸可经起ＤＮＡ的变性和降解，纯高氯酸不适宜ＤＮＡ的变性处理。     

Synthesis and Second‐Order Nonlinearities of Chiral Prolinol‐Substituted Chromophores

A new series of thiophene‐ and furan‐containing chromophores with a chiral prolinol donor and a sulfone acceptor has been synthesized. The UV‐vis absorptions, second‐order nonlinear optical properties, and X‐ray crystal structures are described.     

Sample-stacking techniques in non-aqueous capillary electrophoresis

In sample-stacking techniques, the detection limit cannot be improved by simply increasing the length of the sample solution, because the individual electrophoretic parameters must be optimized. In an attempt to increase the amount of sample injected, as well as to focus them onto a small zone, two novel methods are proposed. One of these employs an "ultra-high conductivity zone", which was inserted between the sample zone and background solution to build an unequal conductivity gradient. The other employs a "low temperature bath". A portion of the capillary (near the junction between the sample solution and the background solution) was immersed in a low temperature bath, which served as a "pseudo-high-conductivity zone" due to the fact that conductivity would increases when the temperature is decreased. As a result, a large volume of sample injection can be achieved. Using 3,4-methylenedioxymethamphetamine as a model compound, the detection limit was determined to be 1.6 x 10(-6) M (S/N = 3) by means of normal non-aqueous capillary electrophoresis (NACE). This could be improved to 3.0 x 10(-8) M, 4.8 x 10(-9) M and 5.0 x 10(-9) M, respectively, when the normal stacking, ultra-high conductivity zone NACE-stacking and the low-temperature zone NACE-stacking methods were applied.