Relationship between liquid crystalline phase stability and ingredient composition in liquid crystal oil–water emulsion

In this study, we postulated that the optical retardation magnitude could be used to evaluate the stability of the LC phase through the Mueller matrix polarimeter method in LC emulsion. In addition, we found that the increase of cetearyl alcohol concentration induced the more periodic dense lattice structure in crystalline phase of LC lamellae and the sorbitan olivate was relatively more responsible for higher ordering in LC phase compared to C12–20 alkyl glucoside in terms of molecular parallel packing on the basis of the optical retardation magnitude. Furthermore, it was confirmed that the LC emulsion had higher skin barrier function owing to lower TEWL and higher reflectance than ordinary emulsion on human skin and maintained a uniform phase without phase separation for 8 weeks.     

Development of simultaneous analysis of tryptophan metabolites in serum and gastric juice – an investigation towards establishing a biomarker test for gastric cancer diagnosis

To evaluate changes in tryptophan metabolism and discover diagnostic biomarkers for gastric cancer, a quantitative method was developed for tryptophan and its seven metabolites (indole‐3‐lactic acid, anthranilic acid, serotonin, nicotinic acid, kynurenic acid, kynurenine and 3‐indoxyl sulfate) in both human serum and gastric juice using liquid chromatography–tandem mass spectrometry (LC–MS/MS). Serum and gastric juice were prepared with a simple protein precipitation using aqueous 0.1% formic acid and acetonitrile. As a result, it was found that the kynurenine pathway of tryptophan metabolism was activated in gastric cancer and that the metabolic ratio of kynurenine/tryptophan, which reflects the enzyme activity of indoleamine‐2,3‐dioxygenase, was associated with the observed metabolic changes. Finally, the investigation of tryptophan metabolites, especially kynurenic acid, in serum and gastric juice might serve as biomarkers for gastric cancer. The findings in this study provide critical information of tryptophan metabolism which can be applied to a serum‐based diagnostic test for gastric cancer.     

Biomimetic design of amphiphilic polycations and surface grafting onto polycarbonate urethane film as effective antibacterial agents with controlled hemocompatibility

The synthetic polycations are ideal candidates as antimicrobial agents, because they resemble natural antimicrobial peptides, but to render hemocompatibility to these materials is a great challenge. Herein, we used 2‐(tert‐butyl‐aminoethyl) methacrylate (TBAEMA), to synthesize its homopolymer and pegylated random and diblock copolymers with polyethyleneglycol methacrylate (PEGMA, M_n = 360 Da) by single‐electron transfer–living radical polymerization (SET‐LRP). In the second step, the secondary amino groups in the precursor polymers were quaternized with iodomethane and bromohexane, to obtain three series of quaternized polymers. The antimicrobial properties of these quaternized polymers were evaluated against Escherichia coli (E. coli), by studying the minimum inhibitory concentrations (MICs) which ranged between 32 and 200 mg L^?1 and showed higher values for the quaternized random than the diblock copolymers. In addition to, we have also demonstrated the grafting of these polycations onto polycarbonate urethane film surfaces, which showed good killing efficacy against E. coli. Furthermore, the hemolysis of these materials was investigated against human red blood cells, which indicated that except the quaternized homopolymers that showed highest hemolysis, all other amphiphilic polycations exhibited very low hemolytic activity. Therefore, our designed materials with controlled structures and functionality, synthesized from cheaply available resources could serve as useful agents in the field of biomedicines and implantable materials. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013, 51, 3166–3176     

Preparation of 17β‐estradiol surface molecularly imprinted polymers and their application to the analysis of biological samples

17β‐Estradiol (E2) surface molecularly imprinted polymers have been prepared using functionalized monodispersed poly(glycidyl methacrylate‐co‐ethylene dimethacrylate) beads as a support. The resulting polymers were found to be uniform in size (5 μm), and the surfaces of the microspheres possessed large pore‐like structures. A chromatographic experiment demonstrated that the resulting microspheres exhibited high levels of recognition and selectivity toward the target molecule. The particles were employed as a novel sorbent in a molecularly imprinted SPE protocol. A method was then developed involving the combination of the pretreatment with HPLC to determine the levels of estrogen secreted from Michigan Cancer Foundation‐7 cells. The obtained results revealed that the extraction recoveries of E2 from real samples were in the range of 73.0–97.5% with RSDs of < 7.5% (n = 3). Calibration curves were established with R values > 0.9996 for concentrations in the range of 0.50–100.00 ng/mL. The LOD of this new method was 0.14 ng/mL. Compared with traditional C₁₈ SPE agents, the particles showed high selectivity and extraction efficiency for E2 in the pretreatment process. The particles could therefore be used to determine trace estrogen in biological samples with a UV detector only.     

Preparation of graphene/zeolite composites and the adsorption of pollutants in water

Russian Journal of Applied Chemistry - Based on the advantages of graphene and zeolite, respectively, the graphene/zeolite composites with core-shell structure were synthesized. The features of the...     

Fabrication of Superjunction Trench Gate Power MOSFETs Using BSG‐Doped Deep Trench of p‐Pillar

In this paper, we propose a superjunction trench gate MOSFET (SJ TGMOSFET) fabricated through a simple p pillar forming process using deep trench and boron silicate glass doping process technology to reduce the process complexity. Throughout the various boron doping experiments, as well as the process simulations, we optimize the process conditions related with the p pillar depth, lateral boron doping concentration, and diffusion temperature. Compared with a conventional TGMOSFET, the potential of the SJ TGMOSFET is more uniformly distributed and widely spread in the bulk region of the n drift layer due to the trenched p‐pillar. The measured breakdown voltage of the SJ TGMOSFET is at least 28% more than that of a conventional device.     

Non-specular reflection of self-collimated beams in photonic-crystal-made prism and waveguide system

We demonstrate a dual-beam-reflection phenomenon for a Gaussian beam illuminating at a Kretschmann configuration composed of a photonic-crystal-made prism and a dielectric waveguide. One reflection beam has a positive shift and the other has a negative shift. The finite-difference time-domain (FDTD) shows that the specific phenomenon takes place only when the corresponding quasi-guided mode supported in the Kretschmann configuration is excited. Field profile of the quasi-guided mode demonstrates a strong localized stationary field in the dielectric waveguide. We found that the maximum positive lateral shift (LS) is 14.27a (where a is the lattice constant), corresponding to 3.07 times of the incident wavelength, which is 0.7135 times of the beam waist and much larger than that in some previous reports.     

First-principles study of structural stability and elastic property of pre-perovskite PbTiO3

The structural stability and the elastic properties of a novel structure of lead titanate,which is named preperovskite PbTiO₃ （PP-PTO） and is constructed with TiO₆ octahedral columns arranged in a one-dimensional manner,are investigated by using first-principles calculations.PP-PTO is energetically unstable compared with conventional perovskite phases,however it is mechanically stable.The equilibrium transition pressures for changing from preperovskite to cubic and tetragonal phases are 0.5 GPa and 1.4 GPa,respectively,with first-order characteristics.Further,the differences in elastic properties between pre-perovskite and conventional perovskite phases are discussed for the covalent bonding network,which shows a highly anisotropic character in PP-PTO.This study provides a crucial insight into the structural stabilities of PP-PTO and conventional perovskite.