Evaluation of an Economical Sunlamp that Emits a Near Solar UV Power Spectrum for Conducting Photoimmunological and Sunscreen Immune Protection Studies

Expense and inconvenience have restricted the use of the filtered xenon are lamp (solar simulator) as a UV source for conducting large-scale animal studies. Because sunscreen immunoprotective levels are significantly affected by the UV power spectrum of the source it is imperative that a solar simulating source be used for accurate measurements of sunscreen protection levels that are relevant to human UV exposures from sunlight. However, relatively inexpensive sunlamps, e. g. the UVA-340, that emit a UV power spectrum similar to that of a solar simulator are available. Unlike FS-type UVB sunlamps, which have a significant amount of effective immunosuppressive nonsolar UV energy at wavelengths below 295 nm, the immunosuppression effectiveness spectrum of UVA-340 sunlamps was nearly identical to that of a solar simulator. The purpose of this study was to evaluate this sunlamp for conducting photoimmunological and sunscreen immune protection studies. Groups of C3H mice were exposed to a range of UVA-340 sunlamp doses (0.25 KJ/m² to 20.0 KJ/m²) to establish a dose-response curve and determine the minimum immune suppression dose (MISD) for induction of local-type suppression of contact hypersensitivity (CH). The MISD, defined as the lowest UV dose given to produce ～50% suppression of the CH response in mice, was determined to be 1.0 kJ/m² for UVA-340 sunlamps. Immune protection tests on four marketed sunscreen lotions (sun protection factors [SPF] 4, 8, 15 and 30) were then conducted with UVA-340 sunlamps using MISD as the endpoint. The immune protection factors for these sunscreens were equivalent to the level of protection predicated by their labeled SPF. These results are similar to those we have previously obtained using a solar simulator. We conclude from these data that the immunosuppressive effects of UVA-340 sunlamps are similar to those of a solar simulator; however, further studies are needed to determine if UVA-340, or similar, sunlamps are a viable alternative to the solar simulator for conducting large-scale animal experiments that require a relevant UV solar spectrum.     

Copper(II) diamino acid complexes: quantum chemical computations regarding diastereomeric effects on the energy of complexation

[reaction: see text] Quantum chemical calculations were used to rationalize the observed enantiodifferentiation in the complexation of alpha-amino acids to chiral Cu(II) complexes. Apart from Cu(II)[bond]pi interactions and steric repulsions between the anchoring cholesteryl-Glu moiety and an aromatic amino acid R group, hydrogen bonding also plays a role. In fact, in the case of tryptophan, C[double bond]O...H[bond]N hydrogen bonding between the glutamate moiety and the tryptophan N[bond]H group compensates for the loss of intramolecular hydrogen-bonding and diminished Cu(II)[bond]pi interactions.     

Fabrication of hollow palladium spheres and their successful application to the recyclable heterogeneous catalyst for suzuki coupling reactions

Novel palladium hollow spheres were synthesized using silica spheres as a template, and they were successfully applied as recyclable heterogeneous catalysts for Suzuki cross coupling reactions.     

Synthesis of pyrimido[4,5-e][1,4]oxazepin-5-ones

Eighteen novel pyrimido[4,5-e][1,4]oxazepin-5-ones were prepared directly via the reaction of either ethyl 4-chloro-2-phenyl-5-pyrimidinecarboxylate (Ia) or ethyl 4-chloro-2-m-chlorophenyl-5-pyrimidinecarboxylate (Ib) with a variety of substituted 2-(alkylamino)ethanols. A typical example was the preparation of 8,9-dihydro-9-methyl-2-phenylpyrimido[4,5-e][1,4]-oxazepin-5(7H)-one (IIa) from the reaction of Ia with 2-(methylamino)ethanol. Hydrolytic cleavage of the lactone ring in IIa with sodium hydroxide solution, followed by acidification with hydrochloric acid afforded 4-[(2-hydroxyethyl)methylamino]-2-phenyl-5-pyrimidinecarboxylic acid (IV). Reactions of IIa with concentrated ammonium hydroxide or hydrazine also caused cleavage of the lactone ring, giving the corresponding amide (V) or hydrazide (VI), respectively. Structural assignments were supported by infrared and nuclear magnetic resonance spectra.     

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用

贮氢材料电极循环寿命的定量预测定时放电半衰期法的应用韩剑文，袁满雪，周作祥，赖城明（南开大学化学系天津３０００７１）关键词：贮氢电极，循环寿命，半衰期。前文￣［１］讨论了应用定终点电位放电半衰期法来预测贮氢材料电极循环寿命的问题。本文讨论如何采用定时...     

Copolymerization characteristics of S-vinyl-O-tert-butylthiocarbonate

Poly-S-vinyl-O-tert-butylthiocarbonate is an excellent precursor to poly(vinyl mercaptan) because the tert-butyloxycarbonyl blocking group can be removed by either acid hydrolysis or thermolysis under conditions which minimize the oxidation of the liberated mercaptan to disulfide. Dilatometric studies of the homopolymerization of S-vinyl-O-tert-butylthiocarbonate demonstrated that the polymerization rate was directly proportional to the concentration of free-radical initiator; no thermal initiation was observed. The molecular weight of the homopolymers and copolymers ranged from 30,000 to 50,000 (GPC). Copolymerization of S-vinyl-O-tert-butylthiocarbonate (M₂) with styrene, (r₁ = 3.0, r₂ = 0.2), methyl methacrylate (r₁ = 1.40, r₂ = 0.17) and vinyl acetate (r₁ = 0.04, r₂ = 11.0) indicated that a sulfur atom adjacent to the vinyl group increases the resonance stability (Q₂ = 0.5) and the electron density (e₂ = ?1.4) of the double bond and the corresponding radical. Water-soluble copolymers could be prépared by incorporating either N-vinylpyrrolidone (r₁ = 0.12, r₂ = 3.94) or N-isopropylacrylamide (r₁ = 1.17, r₂ = 0.3) with M₂. The water solubility of the copolymers decreased markedly when the tert-butyloxycarbonyl group was removed. Copolymers of M₂ with N-vinyl-O-tert-butylcarbamate (r₁ = 0.13, r₂ = 5.10) were utilized to prepare crosslinked poly(vinyl amine–vinyl mercaptan); the crosslinking resulted from urea linkages formed during thermolysis of the copolymer.     

A Facile Construction of the Quadranoid Skeleton: Application to the Total Synthesis of (+/-)-Suberosenone

A tandem free radical cyclization-rearrangement sequence was designed and executed to produce tricyclo[4.3.2.0(1,5)]undecane 7 from cyclopentene 6A in a single operation. The total synthesis of suberosenone was accomplished from 7.     

Detection of vibration-rotational band 5-0 of 12C16O X 1sigma+ with cavity ringdown absorption near 0.96 microm

We have recorded extremely weak absorption in the overtone band 5-0 of 12C16O X 1sigma+ near 0.96 microm with cavity ringdown spectroscopy; the light source was a Raman-shifted dye laser pumped with a frequency-doubled Nd:YAG laser. This band shows lines in branch P to be much more intense than corresponding lines in branch R, in contrast to all lower overtone bands v-0 (v = 1-4). This reversal in relative intensity is explained quantitatively in terms of a radial function for the electric dipolar moment of CO. We have estimated absorption line strengths for P3-P18 in band 5-0 of 12C16O; these strengths are consistent with a pure vibrational matrix element <5/p(x)/0> = (3.6 +/- 0.3) x 10(-36) C m of the electric dipolar moment p(x), a Herman-Wallis coefficient C0(5) of about -0.1, and a band strength of (5.1 +/- 1.3) x 10(-29) m at 293 K.     

Conformational and Configurational Determination in 1,1,4,4-Tetrafluoro-2-Propylidene-3-Methyl-6-Tert-Butyl-1,4-Disila-5-Cyclohexene

A complete assignment of the ¹H, ¹³C and ¹⁹F NMR spectra of 1,1,4,4-tetrafluoro-2-propylidene-3-methyl-6-tert-butyl-1,4-disila-5-cyclohexene 3, the product of the cycloaddition reaction between tetrafluorodisilacyclobutene 1 and cis, trans-2,4-hexadiene mediated by (n⁵-C₅H₅)Mn(CO)₃, has been made by means of various 2D NMR chemical shift correlation methods and selective heteronuclear decoupling techniques. An analysis of the three bond ¹³C-¹H coupling constants and two bond ¹³C-¹⁹F coupling constants and the molecular modeling results enabled the determination of the conformation and configuration of compound 3. The conformation of 3 provides insight into mechanistic details of the Mn-mediated cycloaddition.     

Ligand exchange reactions of ferrocene with phenanthrene or 9,10-dimethylphenanthrene in the presence of aluminum chloride and aluminum

Ligand exchange reactions between phenanthrene or 9,10-dimethylphenanthrene with ferrocene effected in the presence of AlCl₃-Al were carried out under a variety of conditions. With phenanthrene (I), hydrogenation at the C-9 and C-10 positions could take place during the reaction and the cationic products obtained were the η⁶-phenanthrene-η⁵-cyclopentadienyliron and η⁶-9,10-dihydro-phenanthrene-η⁵-cyclopentadienyliron moncations (II and III), and the η⁶-phenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron and η⁶-9,10-dihydrophenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dications (IV and V). With 9,10-dimethylphenanthrene (VI), reactions carried out in refluxing cyclohexane gave the non-hydrogenated η⁶-9,10-dimethylphenanthrene-η⁵-cyclopentadienyliron monocation (VII) and η⁶-9,10-dimethylphenanthrene-$\text{trans}$-$\text{bis}$-η⁵-cyclopentadienyliron dication (VIII). When higher temperatures were used in an attempt to promote hydrogenation, decomposition predominated and no cationic product could be obtained. These finding are discussed and contrasted with previous results obtained from similar reactions using anthracene or 9,10-dimethylanthracene.