Isoshamixanthone: a new pyrano xanthone from endophytic Aspergillus sp. ASCLA and absolute configuration of epiisoshamixanthone

Abstract

Isoshamixanthone (1), a new stereoisomeric pyrano xanthone together with the previously known fungal metabolites, epiisoshamixanthone (2), sterigmatocystin (3), arugosin C (4), norlichexanthone (5), diorcinol (6), ergosterol and methyllinoleate, were obtained from the endophytic fungal strain Aspergillus sp. ASCLA isolated from leaf tissues of the medicinal plant Callistemon subulatus. The chemical structure of the new xanthone (1) was elucidated by extensive 1D, 2D NMR, and ESI HR mass measurements, and by comparison with literature data. The constitutions and absolute configurations of 1 and epiisoshamixanthone (2) were additionally confirmed by X-ray crystallography. Compounds 1,2 were evaluated for their potential anticancer activity using the human cervix carcinoma cell line (KB-3-1). The antimicrobial activities of the fungal extract and compounds 1,2 were studied using a panel of pathogenic microorganisms as well.     

Preparation of bismuth sulfide nanoparticles as targeted biocompatible nano-radiosensitizer and carrier of methotrexate

In this study, Bi₂S₃@BSA–Bio–MTX nanoparticles (NPs) were synthesized for the first time by bovine serum albumin (BSA)-mediated biomineralization (Bi₂S₃@BSA NPs) followed by covalent bonding of biotin (Bio) and methotrexate (MTX) on the surface of the Bi₂S₃@BSA NPs via carbodiimide chemistry. The synthesized NPs were globular and exhibited uniform morphology with a hydrodynamic diameter of 107.6 ± 6.81 nm (mean ± standard deviation) and zeta potential of −20.9 ± 2.18 mV. Drug release from Bi₂S₃@BSA–Bio–MTX NPs indicated an enzyme-dependent release pattern. The in vitro biocompatibility of NPs was confirmed by investigating their cytotoxicity against the HEK-293 cell line and hemolysis assay test, whereas the in vivo biocompatibility of the NPs was evaluated and confirmed by the lethal dose 50 (LD₅₀) test. To evaluate the in vitro anticancer activity of the functionalized NPs and MTX, their cytotoxic effects was assessed against 4T1 cancer cells by 5-dimethylthiazol-z-yl)-2,5-diphenyltetrazolium bromide (MTT) assay with and without X-ray radiation. Results showed that Bi₂S₃@BSA–Bio–MTX NPs have excellent anticancer activity, especially following X-ray radiation.     

Experimental and theoretical approaches to the study of the reactivity and mechanism of the substitution of phenyl 1-(2,4-dinitronaphthyl) ether with anilines derivatives

Reactions of aniline derivatives in dimethyl sulfoxide with phenyl 1-(2,4-dinitronaphthyl) ether yield aryl 1-(2,4-dinitronaphthyl) amine, which results in substitution of the phenoxy groups at the naphthyl ipso carbon atom. Rate constants were measured spectrophotometrically, and reaction proton transfer was rate limiting. The values of the rate coefficients indicate a rate-limiting proton transfer mechanism with significant substituent effects. The calculated activation parameters were of regular variation with substituents in 4- and 3-position in the aniline nucleophile, and the reaction proceeded through a common mechanism. Hammett's reaction constant showed that the reaction rate constants depend on the electron density of the nitrogen atom of aniline derivative, whereas the coefficient value obtained from the Brönsted relation indicated that the reaction was significantly associative and quite zwitterion like. Computational studies of the substitution were carried out based on density functional theory, and theoretical to the experimental agreement was achieved.     

Comparative Study of the Supercapacitive Performance of Three Ferrocene-Based Structures: Targeted Design of a Conductive Ferrocene-Functionalized Coordination Polymer as a Supercapacitor Electrode

As redox-active based supercapacitors are known as highly desirable next-generation supercapacitor electrodes, the targeted design of two ferrocene-functionalized (Fc(COOH)₂) clusters based on coinage metals, [(PPh₃)₂AgO₂CFcCO₂Ag(PPh₃)₂]₂ ⋅ 7 CH₃OH (SC₁: super capacitor) and [(PPh₃)₃CuO₂CFcCO₂Cu(PPh₃)₃] ⋅ 3 CH₃OH (SC₂), is reported. Both structures are fully characterized by various techniques. The structures are utilized as energy storage electrode materials, giving 130 F g⁻¹ and 210 F g⁻¹ specific capacitance at 1.5 A g⁻¹ in Na₂SO₄ electrolyte, respectively. The obtained results show that the presence of Cu^I instead of Ag^I improves the supercapacitive performance of the cluster. Further, to improve the conductivity, the PSC₂ ([(PPh₃)₂CuO₂CFcCO₂]_∞), a polymeric structure of SC₂, was synthesized and used as an energy storage electrode. PSC₂ displays high conductivity and gives 455 F g⁻¹ capacitance at 3 A g⁻¹. The PSC₂ as a supercapacitor electrode presents a high power density (2416 W kg⁻¹), high energy density (161 Wh kg⁻¹), and long cycle life over 4000 cycles (93 %). These results could lead to the amplification of high-performance supercapacitors in new areas to develop real applications and stimulate the use of the targeted design of coordination polymers without hybridization or compositions with additive materials.     

Stoichiometric ratio and doping effects on the thermal properties of sodium potassium sulphate crystals

The influence of stoichiometric ratio on the phase transition of sodium potassium sulphate (Na_xK_1–x)₂SO₄ crystals is investigated in the temperature range 300–500 K. The stoichiometric ratiox is chosen to bex=0.2, 0.3, 0.4, 0.8 and 0.9. The study has been carried out by using differential scanning calorimetry, DSC technique. The value of the specific heat,C _p, at the transition temperature,T _c , increases asx is increased up tox=0.4 and then decreases for higher values ofx. The change in the specific heat, C _p, is following a relation of the form C _p C _p (T–T _c /T _c )^– with = 0.12 which is in a fair agreement with the 3d Ising model. Insertion of Cu²⁺ ions into the lattice of (Na_xK_1–x)₂SO₄ crystals leads to a multiple peak in the temperature dependence ofC _p. The results are discussed from thermodynamical point of view.We would like to thank Prof. E. F. El-Wahidy, Prof. of Solid State Physics and Head of Physics Department, Faculty of Science, Alexandria University, for his interest and support of this work.     

Development and application of a validated stability-indicating high-performance liquid chromatographic method using photodiode array detection for simultaneous determination of granisetron, methylparaben, propylparaben, sodium benzoate, and their main degradation products in oral pharmaceutical preparations

A simple, rapid, and sensitive RP-HPLC method using photodiode array detection was developed and validated for the simultaneous determination of granisetron hydrochloride, 1-methyl-1H-indazole-3-carboxylic acid (the main degradation product of granisetron), sodium benzoate, methylparaben, propylparaben, and 4-hydroxybenzoic acid (the main degradation product of parabens) in granisetron oral drops and solutions. The separation of the compounds was achieved within 8 min on a SymmetryShield RP18 column (100 x 4.6 mm id, 3.5 microm particle size) using the mobile phase acetonitrile--0.05 M KH2PO4 buffered to pH 3 using H3PO4 (3+7, v/v). The photodiode array detector was used to test the purity of the peaks, and the chromatograms were extracted at 240 nm. The method was validated, and validation acceptance criteria were met in all cases. The robust method was successfully applied to the determination of granisetron and preservatives, as well as their degradation products in different batches of granisetron oral drops and solutions. The method proved to be sensitive for determination down to 0.04% (w/w) of granisetron degradation product relative to granisetron and 0.03% (w/w) 4-hydroxybenzoic acid relative to total parabens.     

Preparation of tetraheptylammonium iodide-iodine graphite-multiwall carbon nanotube paste electrode: electrocatalytic determination of ascorbic acid in pharmaceuticals and foods

The present work describes the construction of a new modified graphite-multiwall carbon nanotube paste electrode by casting the appropriate mixture of tetraheptylammonium iodide-iodine as a new modifier. The modified paste electrode was used for the determination of ascorbic acid (AA) in a phosphate buffer solution (pH 2.0). When compared to activated carbon, a graphite and multiwall carbon nanotube paste electrode containing a new modifier, the proposed modified paste electrode not only shifted the oxidation potential of AA towards a less-positive potential but also enhanced its oxidation peak current. Further, the oxidation of AA was highly stable at the modified paste electrode. The optimum analytical conditions were sought. The current response of AA increases linearly while increasing its concentration from 5.6 × 10(-5) to 1.2 × 10(-2) M with a correlation coefficient of 0.9991; the detection limit (3σ) was found to be of 3.6 × 10(-5) M. The present modified paste electrode was also successfully used for the determination of AA in the presence of common interference compounds. The present modified electrode was successfully demonstrated towards the determination of AA in pharmaceutical and food samples.     

An unbreakable on-line approach towards sol-gel capillary microextraction

In this work a novel unbreakable sol-gel-based in-tube device for on-line solid phase microextraction (SPME) was developed. The inner surface of a copper tube, intended to be used as a high performance liquid chromatography (HPLC) loop, was electrodeposited by metallic Cu followed by the self assembled monolayers (SAM) of 3-(mercaptopropyl) trimethoxysilane (3MPTMOS). Then, poly (ethyleneglycol) (PEG) was chemically bonded to the -OH sites of the SAM already covering the inner surface of the copper loop using sol-gel technology. The homogeneity and the porous surface structure of the SAM and sol-gel coatings were examined using the scanning electron microscopy (SEM) and adsorption/desorption porosimetry (BET). The prepared loop was used for online in-tube SPME (capillary microextraction) of some selected polycyclic aromatic hydrocarbons (PAHs), as model compounds, from the aquatic media. After extraction, the HPLC mobile phase was used for on-line desorption and elution of the extracted analytes from the loop to the HPLC column. Major parameters affecting the extraction efficiency including the sample flow rate through the copper tube, loading time, desorption time and sample volume were optimized. For investigating the sorbent efficiency, four loops based on the copper tube itself, the copper tube after electrodeposition with Cu and the tubes with the SAMs and SAMs-sol-gel coating were made and compared. The SAMs-sol-gel coated loop clearly shows a prominently lead of at least 20-100 times of higher efficiency. The linearity for the analytes was in the range of 0.01-500 μg L(-1). Limit of detection (LOD) was in the range of 0.005-0.5 μg L(-1) and the RSD% values (n=5) were all below 8.3% at the 5 μg L(-1) level. The developed method was successfully applied to real water samples while the relative recovery percentages obtained for the spiked water samples were from 90 to 104%. The prepared loop exhibited long life time due to its remarkable solvent and mechanical stability. Different solvents such as methanol, acetonitrile and acetone were passed through the loop for many days and it was also used for more than 100 extractions/desorption of the selected analytes and no decrease in the peak areas was observed.     

Syntheses of new benzoxazole derivatives

2‐(Arylidene)cyanomethylbenzoxazoles have been prepared in water from benzoxazole‐2‐ylacetonitriles. Using multi‐component reactions, a variety of heterocycles containing benzoxazole and nitrile functionality has been prepared. J. Heterocyclic Chem., (2011).