Affinity interactions between phenylboronic acid-carrying self-assembled monolayers and flavin adenine dinucleotide or horseradish peroxidase

A method is provided for the recognition of glycated molecules based on their binding affinities to boronate-carrying monolayers. The affinity interaction of flavin adenine dinucleotide (FAD) and horseradish peroxidase (HRP) with phenylboronic acid monolayers on gold was investigated by using voltammetric and microgravimetric methods. Conjugates of 3-aminophenylboronic acid and 3,3'-dithiodipropionic acid di(N-hydroxysuccinimide ester) or 11-mercaptoundecanoic acid were prepared and self-assembled on gold surfaces to generate monolayers. FAD is bound to this modified surface and recognized by a pair of redox peaks with a formal potential of -0.433 V in a 0.1 M phosphate buffer solution, pH 6.5. Upon addition of a sugar to the buffer, the bound FAD could be replaced, indicating that the binding is reversible. Voltammetric, mass measurements, and photometric activity assays show that the HRP can also be bound to the interface. This binding is reversible, and HRP can be replaced by sorbitol or removed in acidic solution. The effects of pH, incubation time, and concentration of H(2)O(2) were studied by comparing the catalytic reduction of H(2)O(2) in the presence of the electron-donor thionine. The catalytic current of the HRP-loaded electrode was proportional to HRP concentrations in the incubation solution in the range between 5 microg mL(-1) and 0.1 mg mL(-1) with a linear slope of 3.34 microA mL mg(-1) and a correlation coefficient of 0.9945.     

Two-dimensional condensation in camphor-10-sulphonic acid films at the mercury/electrolyte interface

The electrosorption properties of camphor-10-sulphonic acid (CS) in different electrolytes (Na₂SO₄, LiClO₄, KNO₃, KCl, KBr, KJ) were investigated experimentally by ac polarographic measurements at different temperatures. Depending on the type of electrolyte and on the temperature, film condensation was observed.The Frumkin interaction coefficient, determined from the critical degree of coverage, does not depend linearly on the reciprocal temperature as would be the case in correspondence to the temperature dependence of the pit width. This contradiction does not occur if the interaction coefficient is determined from the critical degree of coverage using the lattice gas model. The temperature dependence of the pit width of the differential capacity-potential curves, found in the experiment, can be theoretically described by both these models. The interaction coefficient in the models is inversely proportional to the temperature. Furthermore, the parameters of the standard free energy of adsorption, the interaction energy, the interaction coefficient of the Frumkin isotherm, the adsorption coefficient, and the maximal surface concentration of CS in the film were estimated and compared.     

Carbazole compounds as host materials for triplet emitters in organic light-emitting diodes: polymer hosts for high-efficiency light-emitting diodes

A carbazole homopolymer and carbazole copolymers based on 9,9'-dialkyl-[3,3']-bicarbazolyl, 2,5-diphenyl-[1,3,4]-oxadiazole and 9,9-bis(4-[3,7-dimethyloctyloxy]phenyl)fluorene were synthesized and their electrical and photophysical properties were characterized with respect to their application as host in phosphorescent polymer light-emitting diodes. It is shown that the triplet energy of a polymer depends on the specific connections between its building blocks. Without changing the composition of the polymer, its triplet energy can be increased from 2.3 to 2.6 eV by changing the way in which the different building blocks are coupled together. For poly(9-vinylcarbazole) (PVK), a carbazole polymer often used as host for high-energy triplet emitters in polymer light-emitting diodes, a large hole-injection barrier of about 1 eV exists due to the low-lying HOMO level of PVK. For all carbazole polymers presented here, the HOMO levels are much closer to the Fermi level of a commonly used anode such as ITO and/or a commonly used hole-injection layer such as PEDOT:PSS. This makes high current densities and consequently high luminance levels possible at moderate applied voltages in polymer light-emitting diodes. A double-layer polymer light-emitting diode is constructed comprising a PEDOT:PSS layer as hole-injection layer and a carbazole-oxadiazole copolymer doped with a green triplet emitter as emissive layer that shows an efficacy of 23 cd/A independent of current density and light output.     

Electrocyclic ring opening reaction of a 1,3,4-oxadiazin-6-one into its azaketene tautomer

5-Methyl-2-phenyl-1,3,4-oxadiazin-6-one undergoes cycloaddition with 2-methylpropenylpyrrolidine. One of the cycloadducts is derived from the Diels-Alder reaction of a transient azaketene tautomer.     

Bioaccumulation study of acrylates in algae (<Emphasis Type="Italic">Chlorella kessleri</Emphasis>) by Py-GC and Py-GC/MS

Acrylate monomers methylmethacrylate (MMA) and cyclohexylmethacrylate (CHMA) bioaccumulation has been determined in aquatic organism, algae (Chlorella kessleri). Algae were collected in amount of 0.4 mg and directly injected to the pyrolytical cell. In algae bodies accumulated monomers were analysed by pyrolysis gas chromatography (Py-GC) and pyrolysis gas chromatography coupled with mass spectrometry (Py-GC/MS). Traces of the accumulated monomers in algae body can be determined after 1-, 2-, 3-weeks of incubation. Maximum content of MMA was determined after 3-week of experiment, contrariwise in the case of CHMA after 2-week exposition. Relationship with pyrolysis temperature has also been studied.     

Diffusion-averaged molecular weights of «nonboiling» crude oil fractions

Summary The successful application of the formerly presented concept of diffusion-averaged molecular weight, M_d, to vacuum residues of crude oils, or their fractions, is described. The samples for establishing the calibration curve, logDvs. logM, were crude oil fractions with polydispersities smaller than 1.1. In a surprisingly good approximation the calibration curve is independent of the origin of these fractions if 500<M<10000. The validity of our calibration curve was demonstrated with more than 10 crude oil residues and with some of their hydrogenation residues [2].     

A Novel Anti-Inflammatory d-Peptide Inhibits Disease Phenotype Progression in an ALS Mouse Model

Amyotrophic lateral sclerosis (ALS) is a progressive neurodegenerative disease characterised by selective neuronal death in the brain stem and spinal cord. The cause is unknown, but an increasing amount of evidence has firmly certified that neuroinflammation plays a key role in ALS pathogenesis. Neuroinflammation is a pathological hallmark of several neurodegenerative disorders and has been implicated as driver of disease progression. Here, we describe a treatment study demonstrating the therapeutic potential of a tandem version of the well-known all-d-peptide RD2 (RD2RD2) in a transgenic mouse model of ALS (SOD1*G93A). Mice were treated intraperitoneally for four weeks with RD2RD2 vs. placebo. SOD1*G93A mice were tested longitudinally during treatment in various behavioural and motor coordination tests. Brain and spinal cord samples were investigated immunohistochemically for gliosis and neurodegeneration. RD2RD2 treatment in SOD1*G93A mice resulted not only in a reduction of activated astrocytes and microglia in both the brain stem and lumbar spinal cord, but also in a rescue of neurons in the motor cortex. RD2RD2 treatment was able to slow progression of the disease phenotype, especially the motor deficits, to an extent that during the four weeks treatment duration, no significant progression was observed in any of the motor experiments. Based on the presented results, we conclude that RD2RD2 is a potential therapeutic candidate against ALS.