基于PROFIBUS的6SE70变频器在连铸拉矫机中的应用

济钢第三炼钢厂1＃连铸机引进的是VAI（奥钢联）的板坯连铸机，为了实现对多达20台拉矫电机的控制，它用了负载分配控制技术。为实现负载分配技术，拉矫系统采用了基于PROFIBUS的西门予6SE70变频器构成的现场总线控制系统。本文介绍了该系统PROFIBUS硬件配置、软件编程和116SE70变频器通讯参数的设置.     

Seventh-order elliptic video filter with 0.1 dB pass band ripple employing CMOS CDTAs

In this paper, a CMOS realization of the current differencing transconductance amplifier (CDTA) is given, which is a newly reported active building block for current-mode signal processing. Current differencing stage of the CDTA element is realized using a differential current-controlled current source and in the output stage, floating current sources are used to convert intermediate voltage of z terminal to output currents. Due to the compactness of the circuit, it is capable of high-frequency operation and suitable for video signal-processing applications. The CDTA element is used in a current-mode anti-aliasing video filter, which is designed using operational simulation of a seventh-order passive elliptic filter, so the resulting active filter has the low sensitivity feature of its passive counterpart. The filter has 0.1 dB maximum pass band ripple as imposed by ITU video anti-aliasing filter standard. SPICE-simulation results of both the CDTA element and the seventh-order elliptic filter are given. Simulation results are found in close agreement with theoretical results.     

Nonextensive treatment of nucleation and growth in a thin layer

In this study, a generalized method based upon nonextensive statistics is presented for nucleation and growth processes in a thin layer between two interfaces. It is shown that the presented mathematical model, which uses an index called the entropic index that measures the nonextensivity of the physical system, successfully deals with the nucleation and growth processes, and works better than Johnson–Mehl–Avrami–Kolmogorov model. The presented model also contains Austin–Rickett model as a special case.     

One‐pot synthesis of star‐block copolymers using double click reactions

3‐Arm star‐block copolymers, (polystyrene‐b‐poly(methyl methacrylate))₃, (PS‐b‐PMMA)₃, and (polystyrene‐b‐poly(ethylene glycol))₃, (PS‐b‐PEG)₃, are prepared using double‐click reactions: Huisgen and Diels–Alder, with a one‐pot technique. PS and PMMA blocks with α‐anthracene‐ω‐azide‐ and α‐maleimide‐end‐groups, respectively, are achieved using suitable initiators in ATRP of styrene and MMA, respectively. However, PEG obtained from a commercial source is reacted with 3‐acetyl‐N‐(2‐hydroxyethyl)‐7‐oxabicyclo[2.2.1]hept‐5‐ene‐2‐carboxamide (7) to give furan‐protected maleimide‐end‐functionalized PEG. Finally, PS/PMMA and PS/PEG blocks are linked efficiently with trialkyne functional linking agent 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane 2 in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine (PMDETA) at 120 °C for 48 h to give two samples of 3‐arm star‐block copolymers. The results of the peak splitting using a Gaussian deconvolution of the obtained GPC traces for (PS‐b‐PMMA)₃ and (PS‐b‐PEG)₃ displayed that the yields of target 3‐arm star‐block copolymers were found to be 88 and 82%, respectively. © Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7091–7100, 2008     

Preparation of 3‐arm star polymers (A3) via Diels–Alder click reaction

Diels–Alder click reaction was successfully applied for the preparation of 3‐arm star polymers (A₃) using furan protected maleimide end‐functionalized polymers and trianthracene functional linking agent (2) at reflux temperature of toluene for 48 h. Well‐defined furan protected maleimide end‐functionalized polymers, poly (ethylene glycol), poly(methyl methacrylate), and poly(tert‐butyl acrylate) were obtained by esterification or atom transfer radical polymerization. Obtained star polymers were characterized via NMR and GPC (refractive index and triple detector detection). Splitting of GPC traces of the resulting polymer mixture notably displayed that Diels–Alder click reaction was a versatile and a reliable route for the preparation of A₃ star polymer. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 302–313, 2008     

Adaptive random access algorithm with improved delay performance

We propose an adaptive random access algorithm for mobile environments with capture. The algorithm has a dynamic window size which is updated according to the traffic intensity. The packet arrival rate is tracked by employing sequential detection procedures. Simulations indicate that reducing the window size adaptively under heavy load conditions improves the average delay significantly. Copyright © 2001 John Wiley & Sons, Ltd.     

Star polymers with POSS via azide–alkyne click reaction

Azidopropyl‐heptaisobutyl‐substituted polyhedral oligomeric silsesquioxane (POSS‐N₃) was reacted with 1,1,1‐tris[4‐(2‐propynyloxy)phenyl]‐ethane ( 1 ) and poly(ethylene glycol) (PEG)‐b‐poly(methyl methacrylate) (PMMA) copolymer with alkyne at its center (PEG‐PMMA‐alkyne) affording the first time synthesis of 3‐arm star POSS and PEG‐PMMA‐POSS 3‐miktoarm star terpolymer, respectively, in the presence of CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as catalyst and N,N‐dimethylformamide/tetrahydrofuran as solvent at room temperature. The precursors and the target star polymers were characterized comprehensively by ¹H NMR, GPC, and DSC. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 5947–5953, 2009     

ROMP‐NMP‐ATRP combination for the preparation of 3‐miktoarm star terpolymer via click chemistry

A combination of ring opening metathesis polymerization (ROMP) and click chemistry approach is first time utilized in the preparation of 3‐miktoarm star terpolymer. The bromide end‐functionality of monotelechelic poly(N‐butyl oxanorbornene imide) (PNBONI‐Br) is first transformed to azide and then reacted with polystyrene‐b‐poly(methyl methacrylate) copolymer with alkyne at the junction point (PS‐b‐PMMA‐alkyne) via click chemistry strategy, producing PS‐PMMA‐PNBONI 3‐miktoarm star terpolymer. PNBONI‐Br was prepared by ROMP of N‐butyl oxanorbornene imide (NBONI) 1 in the presence of (Z)‐but‐2‐ene‐1,4‐diyl bis(2‐bromopropanoate) 2 as terminating agent. PS‐b‐PMMA‐alkyne copolymer was prepared successively via nitroxide‐mediated radical polymerization (NMP) of St and atom transfer radical polymerization (ATRP) of MMA. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 497–504, 2009     

Multiarm star block copolymers via Diels‐Alder click reaction

Two types of multiarm star block copolymers: (polystyrene)_m‐poly(divinylbenzene)‐poly(methyl methacrylate)_n, (PS)_m‐polyDVB‐(PMMA)_n and (polystyrene)_m‐poly(divinylbenzene)‐poly(tert‐butyl acrylate)_k, (PS)_m‐polyDVB‐(PtBA)_k were successfully prepared via a combination of cross‐linking and Diels–Alder click reactions based on “arm‐first” methodology. For this purpose, multiarm star polymer with anthracene functionality as reactive periphery groups was prepared by a cross‐linking reaction of divinyl benzene using α‐anthracene end functionalized polystyrene (PS‐Anth) as a macroinitiator. Thus, obtained multiarm star polymer was then reacted with furan protected maleimide‐end functionalized polymers: PMMA‐MI or PtBA‐MI at reflux temperature of toluene for 48 h resulting in the corresponding multiarm star block copolymers via Diels–Alder click reaction. The multiarm star and multiarm star block copolymers were characterized by using ¹H NMR, SEC, Viscotek triple detection SEC (TD‐SEC) and UV. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 178–187, 2009     

Statistical Design of Low Power Square-Law CMOS Cells for High Yield

A robust design of low voltage low power square law CMOS composite cells using statistical VLSI design techniques is presented. Since random device/process variations do not scale down with feature size or supply voltage, the statistical design of low voltage circuits is essential in order to keep functional yields of low voltage circuits at levels that are competitive and cost effective. The Response Surface Methodology and Design of Experiment techniques were used as statistical techniques. This article shows that statistical techniques will result in area/layout optimization which will enhance functional yield of low voltage analog ICs.