Efficient Entrapment of Oxirane Ring Containing Compounds in Thermally Stable Poly(urea-formaldehyde) Polymer Shell Wall

This article aims to address the problems associated with the encapsulation of oxirane ring containing compounds in poly(urea-formaldehyde) (PUF) shell for application in self-healing composite systems. The main objectives were to produce non-agglomerated, stable microcapsules, and to control the pH drop during the encapsulation via oil-in-water emulsion polymerization. In the modified method; two stage additions of urea and formaldehyde monomers, core to shell ratio, weight percent and combination of two surfactants/emulsifiers were altered to produce the desired product. Analysis was done with optical microscope (OM), scanning electron microscopy (SEM), FTIR, particle size analyzer, and thermogravimetric analysis (TGA). The pH drop was confirmed by using a common epoxy resin, an epoxy functionalized polydimethylsiloxane (E-PDMS), and epoxidized palm oil (EPO) as cores. The modified oil-in-water emulsion polymerization of PUF was effective in preventing the pH drop during the encapsulation and a product stable for more than 3 months with less agglomeration was produced. The method produced microcapsules having diameters less than 100 μm at lower agitation rates. The modified method is only applicable to epoxy resin and not for compounds like amine hardeners. The use of stable microcapsules in self-healing coatings can lead towards cost reduction implied for repair and maintenance purposes.     

Effect of Ni(II) substitution on phase stabilization electrical properties of BICo(III)VOX.20 oxide-ion conductor

The BICO_0.20–xNI_xVOX solid electrolyte was synthesized by the standard solid-state reaction. The effect of Ni(II) substitution for Co(III) on phase stabilization and oxide-ion performance has been investigated in the compositional range 0?≤?x?≤?0.20 using X-ray powder diffraction, differential thermal analysis and AC impedance spectroscopy. The highly conductive γ′-phase was effectively stabilized at room temperature for compositions with x?≥?0.13 whose thermal stability increases with Ni content. The complex plane plots of impedance were typically represented at temperatures below 380?°C, suggesting a major contribution of polycrystalline grains to the overall electrical conductivity. The dielectric permittivity measurements revealed the fact that suppression of the ferroelectric transition is compositionally dependent. Interestingly, the maximum ionic conductivity at lower temperatures (~2.56?×?10^?4?S^?cm^?1 at 300?°C) was observed for the composition with x?=?0.13. The variation of low-temperature conductivity with Ni content was accompanied with a general drop in the corresponding values of ΔE_LT. However, the local minimum high-temperature conductivity, σ₆₀₀?°C?~?2.26?×?10^?2?S^?cm^?1 for x?=?0.10, coupled with a local maximum value of ΔE_HT?~?0.48?eV was attributed to an increased defect trapping effect correlated with the V(V)?→?V(IV) reduction at elevated temperatures.     

The Kadomtsev-Petviashvili equation for dust ion-acoustic solitons in pair-ion plasmas

Using the reductive perturbation method,we have derived the Kadomtsev-Petviashvili(KP) equation to study the nonlinear properties of electrostatic collisionless dust ion-acoustic solitons in pair-ion(p-i) plasmas.We have chosen the fluid model for the positive ions,the negative ions,and a fraction of static charged(both positively and negatively) dust particles.Numerical solutions of these dust ion-acoustic solitons are plotted and their characteristics are discussed.It is found that only the amplitudes of the electrostatic dust ion-acoustic solitons vary when the dust is introduced in the pair-ion plasma.It is also noticed that the amplitude and the width of these solitons both vary when the thermal energy of the positive or negative ions is varied.It is shown that potential hump structures are formed when the temperature of the negative ions is higher than that of the positive ions,and potential dip structures are observed when the temperature of the positive ions supersedes that of the negative ions.As the pair-ion plasma mimics the electron-positron plasma,thus our results might be helpful in understanding the nonlinear dust ion acoustic solitary waves in super dense astronomical bodies.     

Development and validation spectroscopic methods for the determination of lomefloxacin in bulk and pharmaceutical formulations

Four simple, sensitive spectrophotometric and spectrofluorimetric methods (A-D) for the determination of antibacterial drug lomefloxacin (LMFX) in pharmaceutical formulations have been developed. Method A is based on formation of ternary complex between Pd(II), eosin and LMFX in the presence of methyl cellulose as surfactant and acetate-HCl buffer pH 4.0. Spectrophotometrically, under the optimum conditions, the ternary complex showed absorption maximum at 530 nm. Methods B and C are based on redox reaction between LMFX and KMnO₄ in acid and alkaline media. In indirect spectrophotometry method B the drug solution is treated with a known excess of KMnO₄ in H₂SO₄ medium and subsequent determination of unreacted oxidant by reacting it with safronine O in the same medium at λ_max = 520 nm. Direct spectrophotometry method C involves treating the alkaline solution of LMFX with KMnO4 and measuring the bluish green product at 604 nm. Method D is based on the chelation of LMFX with Zr(IV) to produce fluorescent chelate. At the optimum reaction conditions, the drug-metal chelate showed excitation maxima at 280 nm and emission maxima at 443 nm. The optimum experimental parameters for the reactions have been studied. The validity of the described procedures was assessed. Statistical analysis of the results has been carried out revealing high accuracy and good precision. The proposed methods were successfully applied for the determination of the selected drug in pharmaceutical preparations with good recoveries.     

Antifungal Ursene‐Type Triterpene from the Roots of Alhagi camelorum

A new ursene‐type triterpene, (3β)‐30‐norurs‐11‐en‐3‐ol ( 1 ), was isolated from the MeOH extract of the roots of Alhagi camelorum. Its structure was elucidated on the basis of extensive spectroscopic investigations by 1D‐ and 2D‐NMR studies. In addition, 1 was evaluated for antifungal activities. Its application on prepared cultures of two fungi, i.e., Aspergillus niger and Saccharomyces cerevisiae, showed noticeable antifungal activity, suggesting that 1 could be used as a new promising agent in antifungal drug formulations.     

Spectrophotometric determination of microamounts of thorium with thorin in the presence of cetylpyridinium chloride as surfactant in perchloric acid

A simple and more sensitive spectrophotometric method is developed for determination of thorium using thorin as a chromogenic reagent in the presence of cetylpyridinium chloride (CPC) in perchloric acid. The reaction was instantaneous and complex was found stable for 168 h. A significant bathochromic shift was noted in the presence of CPC. The determination range was enhanced from 25 to 30 μg mL^?1 with molar absorptivity of 2.95 × 104 L mol^?1 cm^?1 at 25 ± 5 °C. Sandell’s sensitivity was calculated to be 6.8 ng cm^?2 at 581 nm. Relative standard deviation was reduced from 4.25 to 2.5. The interference of Ni²⁺, Mn²⁺, Sn⁴⁺, phosphate, EDTA, sulphate and tartrate has been reduced significantly in the presence of surfactant. The validity of the proposed method was tested by determining thorium in Certified Reference Materials.     

Variation-based cracked laminate analysis revisited and fundamentally extended

The analyses of cracked laminates based on a variational principle and related approaches are appraised in this paper. The limitations of the existing methodology on the analyses of more general laminate configurations have been identified. It has been revealed that the limiting factor is the lack of boundary conditions for uncracked laminae. Natural boundary conditions have then been derived from the variational principle to meet the need. Such boundary conditions are mathematically sound but cannot be simply interpreted from the physical construction of the problem intuitively. A well posed boundary value problem has thus been formulated for laminates containing however many cracked and uncracked laminae. Appropriate mathematical tools can then be employed to solve the boundary value problem. The capability of analysing cracked laminates has been enhanced significantly, as a result.     

Preprocessing Strategies for Sparse Infrared Spectroscopy: A Case Study on Cartilage Diagnostics

The aim of the study was to optimize preprocessing of sparse infrared spectral data. The sparse data were obtained by reducing broadband Fourier transform infrared attenuated total reflectance spectra of bovine and human cartilage, as well as of simulated spectral data, comprising several thousand spectral variables into datasets comprising only seven spectral variables. Different preprocessing approaches were compared, including simple baseline correction and normalization procedures, and model-based preprocessing, such as multiplicative signal correction (MSC). The optimal preprocessing was selected based on the quality of classification models established by partial least squares discriminant analysis for discriminating healthy and damaged cartilage samples. The best results for the sparse data were obtained by preprocessing using a baseline offset correction at 1800 cm⁻¹, followed by peak normalization at 850 cm⁻¹ and preprocessing by MSC.     

Ultrasound-Assisted Synthesis and In Silico Modeling of Methanesulfonyl-Piperazine-Based Dithiocarbamates as Potential Anticancer,Thrombolytic, and Hemolytic Structural Motifs

Piperazine-based dithiocarbamates serve as important scaffolds for numerous pharmacologically active drugs. The current study investigates the design and synthesis of a series of dithiocarbamates with a piperazine unit as well as their biological activities. Under ultrasound conditions, the corresponding piperazine-1-carbodithioates 5a–5j were synthesized from monosubstituted piperazine 2 and N-phenylacetamides 4a–4j in the presence of sodium acetate and carbon disulfide in methanol. The structures of the newly synthesized piperazines were confirmed, and their anti-lung carcinoma effects were evaluated. A cytotoxic assay was performed to assess the hemolytic and thrombolytic potential of the synthesized piperazines 5a–5j. The types of substituents on the aryl ring were found to affect the anticancer activity of piperazines 5a–5j. Piperazines containing 2-chlorophenyl (5b; cell viability = 25.11 ± 2.49) and 2,4-dimethylphenyl (5i; cell viability = 25.31 ± 3.62) moieties demonstrated the most potent antiproliferative activity. On the other hand, piperazines containing 3,4-dichlorophenyl (5d; 0.1%) and 3,4-dimethylphenyl (5j; 0.1%) rings demonstrated the least cytotoxicity. The piperazine with the 2,5-dimethoxyphenyl moiety (5h; 60.2%) showed the best thrombolytic effect. To determine the mode of binding, in silico modeling of the most potent piperazine (i.e., 5b) was performed, and the results were in accordance with those of antiproliferation. It exhibits a similar binding affinity to PQ10 and an efficient conformational alignment with the lipophilic site of PDE10A conserved for PQ10A.