Application of a Carbon‐Paste Electrode Modified with 2,7‐Bis(ferrocenyl ethyl)fluoren‐9‐one and Carbon Nanotubes for Voltammetric Determination of Levodopa in the Presence of Uric Acid and Folic Acid

A carbon‐paste electrode modified with 2,7‐bis(ferrocenyl ethyl)fluoren‐9‐one and carbon nanotubes was used for the sensitive voltammetric determination of levodopa (LD). The electrochemical response characteristics of the modified electrode toward LD, uric acid (UA) and folic acid (FA) were investigated. The results showed an efficient catalytic activity of the electrode for the electrooxidation of LD, which leads to lowering its overpotential by more than 320 mV. The modified electrode exhibits an efficient electron mediating behavior together with well‐separated oxidation peaks for LD, UA and FA. Also, the modified electrode was used for determination of LD in some real samples.     

Sensitive and Selective Detection of Antibiotic D-Penicillamine Based on a Dual-Mode Probe of Fluorescent Carbon Dots and Gold Nanoparticles

This paper reported a dual-mode probe for D-penicillamine on the basis of pH-mediated gold nanoparticles aggregation and fluorescence resonance energy transfer (FRET) from carbon dots. D-penicillamine is a zwitterionic compound and has different forms depending on specific pH ranges. The thiol group of D-penicillamine has high affinity towards the surface of gold nanoparticles and can replace other surface ligands. When pH values were close to its isoelectrical point (pH(I)), the D-penicillamine capped gold nanoparticles aggregated through hydrogen bonding or electrostatic interactions, resulting in the releasing of carbon dots from gold nanoparticles. The dual-mode probe consisted of fluorescent carbon dots and gold nanoparticles, and the fluorescence of carbon dots was quenched by the attached gold nanoparticles due to the FRET. Then, the fluorescence can be recovered in presence of D-penicillamine due to the gold nanoparticles aggregation in specific pH range. Under the optimum conditions, the probe has linear response for D-penicillamine in the 0.25–1.5 μM concentration range with a detection limit of 0.085 μM. This method provides a potential application in sensitive detection of D-penicillamine.     

Optimization of dispersive liquid-liquid microextraction and improvement of detection limit of methyl tert-butyl ether in water with the aid of chemometrics

Dispersive liquid-liquid microextraction (DLLME) coupled with gas chromatography-mass spectrometry-selective ion monitoring (GC-MS-SIM) was applied to the determination of methyl tert-butyl ether (MTBE) in water samples. The effect of main parameters affecting the extraction efficiency was studied simultaneously. From selected parameters, volume of extraction solvent, volume of dispersive solvent, and salt concentration were optimized by means of experimental design. The statistical parameters of the derived model were R(2)=0.9987 and F=17.83. The optimal conditions were 42.0 μL for extraction solvent, 0.30 mL for disperser solvent and 5% (w/v) for sodium chloride. The calibration linear range was 0.001-370 μg L(-1). The improved detection limit with the aid of chemometrics was 0.3 ng L(-1). The relative standard deviation (RSD) with n=9 for 0.1 mg L(-1) MTBE in water with and without internal standard was 2.7% and 3.1%, respectively. Under the optimal conditions, the relative recoveries of spiked MTBE in different water samples were in the range of 100-105%.     

A dynamic unreliability assessment and optimal maintenance strategies for multistate weighted k‐out‐of‐n:F systems

In this paper, a dynamic evaluation of the multistate weighted k‐out‐of‐n:F system is presented in an unreliability viewpoint. The expected failure cost of components is used as an unreliability index. Using failure cost provides an opportunity to employ financial concepts in system unreliability estimation. Hence, system unreliability and system cost can be compared easily in order to making decision. The components' probabilities are computed over time to model the dynamic behavior of the system. The whole system has been assessed by recursive algorithm approach. As a result, a bi‐objective optimization model can be developed to find optimal decisions on maintenance strategies. Finally, the application of the proposed model is investigated via a transportation system case. Matlab programming is developed for the case, and genetic algorithm is used to solve the optimization model. Copyright © 2016 John Wiley & Sons, Ltd.     

On a class of quaternary complex Hadamard matrices

We introduce a class of regular unit Hadamard matrices whose entries consist of two complex numbers and their conjugates for a total of four complex numbers. We then show that these matrices are contained in the Bose–Mesner algebra of an association scheme arising from skew Paley matrices.     

Self-Aggregation of Cationic Dimeric and Anionic Monomeric Surfactants with Nonionic Surfactant in Aqueous Medium

Spectrofluorometric measurements have been used to elaborate the self-aggregation of mixture of anioinic, sodium dodecylbenzenesulfonate (SDBS), and cationic gemini, alkanediyl-α, ω-bis (tetradecyldimethylammonium bromide) (14-4-14) with nonionic surfactant, polyoxyethylene 10 cetyl ether (Brij-56). The critical micelle concentration (cmc) of the binary mixtures has been investigated. Application of the regular solution theory (RST) to the experimental data yield the interaction parameter at mixed micelles (β), indicate an attractive interaction and reflect the synergistic behavior in both Brij-56/SDBS and Brij-56/14-4-14 systems. The micelle aggregation number (N _agg) was measured using a steady state fluorescence quenching method. The N _agg values of the mixed surfactant system were larger than those of pure components. The micropolarity of various combinations and the binding constants (K _sv) were determined from the ratio of intensity of peaks (I ₁/I ₃) of pyrene fluorescence emission spectrum and its quenching, respectively.     

The Effect of Structure of the Clay Modifier on the Morphology and Properties of Polystyrene/Clay Nanocomposites Prepared via In Situ Suspension Polymerization

Polystyrene (PS)/organoclay nanocomposites were prepared via free radical suspension polymerization. Two kinds of organoclay were used, labeled KT and KD, modified by trimethyloctadecyl ammonium (TM) and dimethyldioctadecyl ammonium (DM) ions, respectively. Nanocomposites containing various amounts of both of the organoclay nanoparticles (1, 3, and 5 wt%) were prepared. The wide angle X-ray diffraction (WAXD) results revealed intercalation in both of the nanocomposites. The greatest improvement in thermal stability of the nanocomposites was achieved with 5 wt% of organo-MMT for both of the clays. The nanocomposite containing 3 wt% of KT organo-MMT showed the greatest improvement of storage modulus. When the organoclay content exceeded 3 wt%, the storage moduli decreased compared to the nanocomposite filled with 3 wt% of the organoclay. D-spacing calculations using Bragg's law and WAXD data showed that the KT and KD nanoparticles were intercalated within the PS matrix, but with different extents of intercalation. The styrene conversions of the as-polymerized nanocomposite samples were obtained by a gravimetric method. The results showed that conversion decreased with incorporation of organoclay in the reaction recipe. Particle size was also increased by increasing nanoclay content.     

Facile Green Synthesis of NiO/NiCo2O4 Nanocomposite as an Efficient Electrochemical Platform for Determination of Dopamine

The synthesis of NiO/NiCo₂O₄ nanoparticles by an eco-friendly, fast, simple and cost-effective approach employing Urtica extract is reported in this study. The NiO/NiCo₂O₄ nanocomposite were characterized using VSM, FTIR, XRD, and SEM techniques. Moreover, to construct a modified carbon paste electrode, NiO/NiCo₂O₄ were employed and this sensor was used for dopamine (DA) detection. Using cyclic voltammetry (CV) and differential pulse voltammetry (DPV) techniques, the electrochemical behavior of dopamine at the NiO/NiCo₂O₄/CPE was investigated. Analysis of dopamine, with a limit of detection (LOD) equal to 0.04 μM, in the concentration range of 0.1–100.0 μM, was facilitated by NiO/NiCo₂O₄/CPE. Moreover, the satisfactory selectivity for DA determination in the presence of uric acid (UA) and ascorbic acid (AA), was obtained. The suggested new sensor displayed a good reproducibility, sensitivity, and stability for determination of DA in drug and biological samples.     

Blood‐Catalyzed RAFT Polymerization

The use of hemoglobin (Hb) contained within red blood cells to drive a controlled radical polymerization via a reversible addition‐fragmentation chain transfer (RAFT) process is reported for the first time. No pre‐treatment of the Hb or cells was required prior to their use as polymerization catalysts, indicating the potential for synthetic engineering in complex biological microenvironments without the need for ex vivo techniques. Owing to the naturally occurring prevalence of the reagents employed in the catalytic system (Hb and hydrogen peroxide), this approach may facilitate the development of new strategies for in vivo cell engineering with synthetic macromolecules.     

Effect of ammonia/oxygen/nitrogen equivalence ratio on spherical turbulent flame propagation of pulverized coal/ammonia co-combustion

Because ammonia is one of the most promising candidates for energy carrier in the future, various applications of ammonia as a fuel are currently considered. One medium for utilizing ammonia is by introducing it to coal-fired boilers. To the best of our knowledge, this paper is the first to report the fundamental mechanism of the flame propagation phenomenon for pulverized coal/ammonia co-combustion. The effects of the equivalence ratio of the ammonia-oxidizer mixture on the flame propagation velocity of pulverized coal/ammonia co-combustion in turbulent fields were clarified by the experiments employing a unique fan-stirred constant volume chamber. The flame propagation velocities of pulverized coal/ammonia co-combustion, pure ammonia combustion, and pure pulverized coal combustion were compared. As expected, the flame propagation velocity of pulverized coal/ammonia was higher than that of the pure pulverized coal combustion for all conditions. However, the comparison of the flame propagation velocities of pulverized coal/ammonia co-combustion and that of the pure ammonia combustion, revealed that whether the flame propagation of the pulverized coal/ammonia was higher than that of the pure ammonia combustion was dependent on the equivalence ratio of the ammonia-oxidizer. This unique feature was explained by a mechanism including three competing effects proposed by the authors. In the ammonia lean condition, the positive effects, which are the strong radiation from the luminous flame and the increment of local equivalence ratio by the addition of volatile matter, are larger than the negative effect, which is the heat absorption by coal particles in preheat zone. In the ammonia rich condition, the effect of an increment of the local equivalence ratio by the addition of volatile matter turns into a negative effect. Consequently, the negative effects overcome the positive effect in the ammonia rich condition resulting in a lower flame propagation velocity of pulverized coal/ammonia co-combustion.