Fabrication of a nanostructure-based electrochemical sensor for simultaneous determination of N-acetylcysteine and acetaminophen

A carbon-paste electrode modified with 2,7-bis(ferrocenyl ethyl)fluoren-9-one (2,7-BF) and carbon nanotubes (CNTs) was used for the sensitive and selective voltammetric determination of N-acetylcysteine (NAC). The mediated oxidation of NAC at the modified electrode was investigated by cyclic voltammetry (CV). Also, the values of catalytic rate constant (k), and diffusion coefficient (D) for NAC were calculated. Differential pulse voltammetry (DPV) of NAC at the modified electrode exhibited two linear dynamic ranges with a detection limit (3σ) of 52.0 nmol L⁻¹. DPV was used for simultaneous determination of NAC and acetaminophen (AC) at the modified electrode, and quantitation of NAC and AC in some real samples by the standard addition method.     

Chemical Characterization of Cultivated Tagetes minuta L. by Use of Ultrasound-Assisted Head Space SPME and GC–MS

Ultrasound-assisted headspace solid-phase microextraction (UA-HS-SPME) coupled to gas chromatography–mass spectrometry (GC–MS) has been used for analysis of volatile compounds in dry Tagetes minuta L. The highest extraction efficiency was achieved with a 100-μm polydimethylsiloxane (PDMS) fiber. Different experimental conditions, for example, type of fiber coating, sonication time, extraction time and temperature, and desorption time, were investigated. Thirty compounds were identified by use of this UA-HS-SPME–GC–MS method. Comparison of the method with the commonly used hydrodistillation (HD) method showed that the proposed method is simpler, needs much less sample, requires shorter extraction time and lower temperature, has high trapping ability, and extracts more volatile and thermally sensitive compounds. The major components identified by use of the method were e-ocimenone (10.3%), cis-β-ocimene (4.8%), α-terpinolene (8.4%), trans-caryophyllene (19.7%), germacrene-d (10.0%), and camphor (3.6%).     

Pseuduvarines A and B, two new cytotoxic dioxoaporphine alkaloids from Pseuduvaria rugosa

Pseuduvarines A (1) and B (2), two new dioxoaporphine alkaloids with an amino moiety, were isolated from the stem bark of Pseuduvaria rugosa and their structures were elucidated by combination of 2D-NMR spectroscopic analysis. Pseuduvarines A (1) and B (2) showed cytotoxicity against MCF7, HepG2, and HL-60 (1: IC??, 0.9, 21.7, and >50.0 μM, respectively, 2: IC?? >50.0, 15.7, and 12.4 μM, respectively).     

The extent of molecular orientation at liquid/vapor interface of pyridine and its alkyl derivatives by molecular dynamics simulation

In this paper, molecular dynamics simulation was performed to investigate the liquid∕vapor interfacial structure of neat polar liquids. Large-scale ensembles of liquid pyridine and its alkyl derivatives, 4-methylpyridine and 4-ethylpyridine, were simulated by classical molecular dynamics at 298 K. For the liquid system of low polarity, the surface density profile of the atoms meet exactly at the middle of interfacial region, and atoms of hydrophobic nature can be hardly discriminated from hydrophilic ones in either vapor or liquid sides. For a liquid system of high polarity, the density profile of atoms with different nature is highly discriminated all over the interfacial region, and as the polarity increases, a dense region of atomic density is clearly developed in the subsurface region. The recognized bivariate method was also used to study the molecular orientational distribution quantitatively. Orientational analysis of the three liquid systems indicates that the pyridine ring plane in the outmost surface tends to be vertical. Its tendency in the innermost interfacial region is parallel. The orientational states available to 4-ethylpyridine and pyridine are discriminated by predicting the possibility of a bisector-wise tumbling for the ring plane in pyridine and a side-wise tumbling in 4-ethylpyridine. The orientational distribution maps explain the trend of experimental surface tension and surface entropy. As the dipole moment of these liquids increases with the alkyl chain length, the surface structural profile changes from a regular definite one to a surface of complex atomic structure involving a dense phase near the interface. The development of dense region in alkyl derivatives is the result of segregation of molecules due to the alkyl group, which is captured and discriminated by molecular dynamics simulation even when the length of a short alkyl chain is increased by one carbon atom.     

Allylpalladium dimers with metals connected by binucleating dithiooxamidates in two different coordination modes: solution behavior and solid-state structure

A series of allylpalladium dimers having metals connected by binucleating dialkyldithiooxamidate [N(R)SC-CS(R)N](2-) [R = methyl, ethyl, isopropyl, benzyl, isoamyl, (S)-1-(1-phenyl)ethyl, meso-(1-phenyl)ethyl, and rac-(1-phenyl)ethyl] were prepared by reacting the monochelate [(η(3)-allyl)Pd(N(R)SC-CS(R)NH κ-S,S Pd)] with [(η(3)-allyl)PdCl](2) in chloroform. At low temperature (20 °C), the bimetallic complexes [(η(3)-allyl)Pd](2)(μ-dialkyldithiooxamidate κ-N,N' Pd, κ-S,S' Pd') (kinetic compounds) are formed in a short reaction time (10 min). At a higher temperature (50 °C) and a longer reaction time (24 h), the corresponding bimetallic isomers [(η(3)-allyl)Pd](2)(μ-dialkyldithiooxamidate κ-N,S Pd, κ-N',S' Pd') (thermodynamic compounds) are obtained. Both kinetic and thermodynamic compounds can exist as endo or exo isomers, depending on the reciprocal orientation of the allyl cuspids. Both endo and exo isomers are only detectable in solution when the alkyl substituents are chiral alkyl groups. Moreover, diffractometric modeling agrees with the presence of both isomers in the solid state even when the alkyl substituent is an achiral alkyl group. In a chloroform solution, endo and exo isomers undergo isomeric conversion owing to the apparent allyl rotation that follows the Pd-N bond rupture in the (η(3)-allyl)Pd(N^N) frame of kinetic compounds or in the (η(3)-allyl)Pd(N^S) frame of thermodynamic compounds. The dithiooxamidate [N(R)SC-CS(R)N](2-), when engaged in a κ-N,S Pd, κ-N',S' Pd' coordination mode, behaves as a hybrid hemilabile binucleating ligand. At room temperature and in a chloroform solution, the kinetic compounds rearrange into the thermodynamically more stable isomers in about 3 or 4 days. The higher stability of the thermodynamic species was evaluated by means of computational studies in accordance with the maximum hardness principle. Finally, the crystal structures of [(η(3)-allyl)Pd](2)(μ-diethyldithiooxamidate κ-N,S Pd, κ-N',S' Pd'), [(η(3)-allyl)Pd](2)(μ-meso-(1-phenyl)ethyldithiooxamidate κ-N,S Pd, κ-N',S' Pd'), and [(η(3)-allyl)Pd](2)(μ-rac-(1-phenyl)ethyldithiooxamidate κ-N,N' Pd, κ-S,S' Pd') are reported.     

Effect of Al<Subscript>2</Subscript>O<Subscript>3</Subscript> phases on the enhancement of thermal conductivity and viscosity of nanofluids in engine oil

Thermal conductivity of α-Al₂O₃ was measured using hot wire method. α-Al₂O₃ (20 nm in size) was synthesized by microwave method for which, the results were compared with commercially available γ-Al₂O₃. Thermal conductivity of nanofluids was investigated considering, it is dependency on Al₂O₃ phase. It was observed that by adding 3 wt% of nano γ-Al₂O₃ and α-Al₂O₃ to the engine oil, thermal conductivity increases by 37 and 31%, respectively. The corresponding viscosity increase for the same amount of nano γ-Al₂O₃ and α-Al₂O₃ were 36 and 38%, respectively. It was concluded that the differences in thermal conductivity originate from higher specific surface area of γ-Al₂O₃ compared to the α-Al₂O₃ which is the result of porosity difference, obtained during the synthesis process.     

Nonlinear vibration mitigation of a flexible rotor shaft carrying a longitudinally dispositioned unbalanced rigid disc

Nonlinear Dynamics - This study is dedicated to investigate the nonlinear dynamics of a system composed of a flexible rotor shaft carrying a longitudinally dispositioned unbalanced rigid disc. The...     

Variation of the electronic properties of zigzag boron nitride nanotubes by Al-doping: a DFT study

Boron nitride nanotubes (BNNTs) are semiconductors with a wide band gap. In comparison with carbon nanotubes (CNTs), BNNTs have higher chemical stability, excellent mechanical properties and higher thermal conductivity. In this paper, we study the effect of diameters and substituting B and N atoms of various zigzag BNNTs with Al, on structural and electronic properties of BNNTs in solid state using the density functional theory method. The results of calculations of density of states and band structure (band) showed that the band gap between the valence and conduction level increases as a result of the enhancement of tube diameter of BNNTs. Finally, the results showed that the electronic properties of the pristine BNNTs can be improved by doping Al atom in the zigzag configuration of tubes.     

Benzoylferrocene-modified carbon nanotubes paste electrode as a voltammetric sensor for determination of hydrochlorothiazide in pharmaceutical and biological samples

The electrooxidation of hydrochlorothiazide (HCT) at the surface of a benzoylferrocene modified multi-walled carbon nanotube paste electrode was studied using electrochemical approaches. Under the optimized conditions (pH 7.0), the square wave voltammetric peak current of HCT increased linearly with HCT concentration in the ranges of 6.0?×?10^?7 to 3.0?×?10^?4 M. The detection limit was 9.0?×?10^?8 M HCT. The diffusion coefficient (D?=?1.75?×?10^?5 cm²/s) and electron transfer coefficient (α?=?0.45) for HCT oxidation were also determined. The proposed sensor was successfully applied for the determination of HCT in human urine and tablet samples.     

Electrocatalytic oxidation and highly selective voltammetric determination of L-cysteine at the surface of a 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone modified carbon paste electrode.

A carbon paste electrode (CPE) chemically modified with 1-[4-(ferrocenyl ethynyl)phenyl]-1-ethanone (4-FEPEMCPE) was employed to study the electrocatalytic oxidation of L-cysteine using cyclic voltammetry, differential pulse voltammetry and double potential step chronoamperometry as diagnostic techniques. The diffusion coefficient (D = 7.863 x 10(-6) cm2 s(-1)) of L-cysteine was also estimated using chronoamperometry. The electron-transfer coefficient, alpha (= 0.40), for L-cysteine at the surface of 4-FEPEMCPE was determined using cyclic voltammetry technique. It was found that under an optimum pH (= 7.00), the oxidation of L-cysteine at the surface of such an electrode occurred at a potential of about 350 mV less positive than that of an unmodified CPE. The catalytic oxidation peak currents represented a linear dependence on the L-cysteine concentration. Linear analytical curves were obtained in the ranges of 9.0 x 10(-5) - 4.9 x 10(-3) M and 2.0 x 10(-5) - 2.8 x 10(-3) M of L-cysteine with correlation coefficients of 0.9981 and 0.9982 in cyclic voltammetry and differential pulse voltammetry, respectively. The detection limits (2 sigma) were determined to be 9.9 x 10(-6) M and 5 x 10(-6) M with cyclic voltammetry and differential pulse voltammetry, respectively. The influences of twenty other amino acids, such as glutamine, L-glutamic acid, L-glysine, L-histidine, L-isoleucine, L-leucine, L-arginine hydrochloride, L-aspargine, L-aspartic acid, S-carboxy methyl-L-cysteine, L-methionine, L-phenyl alanine, L-proline, L-serine, L-threonine, L-cystine, cysteamine and gluthathione, on the current response of the sensor were examined. The obtained results did not show any influence on the analytical signal of L-cysteine by these amino acids (except for cysteamine). The method was also used for the selective determination of L-cysteine in patient-blood plasma and some pharmaceutical preparations by using standard addition method.