Theoretical Description of the Third Order Parametric Wave Mixing in a Gas-Filled Capillary of Femto-Second Laser Pulse

The theoretical signal-pressure curves are calculated from approximate analytical solutions of the coupledequations describing the third order parametric wave mixing in a gas-filled capillary of femto-second laser pulses. Thecomparison with the corresponding experimental curves suggests that the following three factors exert important influ-ences on the degree of fitting between the theoretical and experimental results: the walk-off, the phase modulation, andthe third order harmonic of idler pulse.     

有限元节点编号优化

从分析最简单最优的矩形单元节点编号着手，分析其特点，得出各个节点的相邻单元节点编号总和除以该节点相邻单元数所得的节点商以及相邻单元最小最大节点编号和都为升序排列。总结出一种新型的有限元节点重编号方法，并举例说明该算法能减少有限元的带宽。     

Nonlinear rheological behavior of silica filled solution‐polymerized styrene butadiene rubber

The reinforcement and nonlinear viscoelastic behavior have been investigated for silica (SiO₂) filled solution‐polymerized styrene butadiene rubber (SSBR). Experimental results reveal that the nonlinear viscoelastic behavior of the filled rubber is similar to that of unfilled SSBR, which is inconsistent with the general concept that this characteristic comes from the breakdown and reformation of the filler network. It is interesting that the curves of either dynamic storage modulus (G′) or loss tangent (tan δ) versus strain amplitude (γ) for the filled rubber can be superposed, respectively, on those for the unfilled one, suggesting that the primary mechanism for the Payne effect is mainly involved in the nature of the entanglement network in rubbery matrix. It is believed there exists a cooperation between the breakdown and reformation of the filler network and the molecular disentanglement, resulting in enhancing the Payne effect and improving the mechanical hysteresis at high strain amplitudes. Moreover, the vertical and the horizontal shift factors for constructing the master curves could be well understood on the basis of the reinforcement factor f(φ) and the strain amplification factor A(φ), respectively. The surface modification of SiO₂ causes a decrease in f(φ), which is ascribed to weakeness of the filler–filler interaction and improvement of the filler dispersion. However, the surface nature of SiO₂ hardly affects A(φ). © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 2594‐2602, 2007     

BC—1型白平衡仪的原理与实践

ＢＣ－１型白平衡仪是一种光电积分式测色仪器，它通过颜色传感器获取屏幕的红，绿，蓝三条色信号，与预先存储在仪器中的标准信号值相比较通过ＬＥＤ条形显示器显示两者之偏差，用以直接指导彩电生产线的白平衡调整，仪器采用Ｉｎｔｅｌ１８０９８单片微机为系统核心，内藏信号发生器，仪器可任选红，绿，蓝作为基准色，具有基色亮度自动调整功能，该仪器的定标方法简单，快捷，可方便地存储８套基准白场标准数据，该仪器已可靠在应     

Java语言及其虚拟机技术探讨

随着Internet的迅猛发展，Internet编程语言Java愈来愈成为计算机行业的焦点。本文在简述了Java的主要特点后，重点对Java最关键的技术──虚拟机进行了深入的探讨。     

光纤温度传感器综述

本文阐述了温度传感器的概况和使用要求，详细地论述了目前国外各类光纤温度传感器的原理、结构、特点、技术水平和发展状况。     

Syntheses,crystal structures and blue emission of three zinc(II) coordination polymers with a 4,4′‐dicarboxybiphenyl sulfone ligand

Three novel zinc complexes [Zn(dbsf)(H₂O)₂] ( 1 ), [Zn(dbsf)(2,2′‐bpy)(H₂O)]·(i‐C₃H₇OH) ( 2 ) and [Zn(dbsf)(DMF)] ( 3 ) (H₂dbsf = 4,4′‐dicarboxybiphenyl sulfone, 2,2′‐bpy = 2,2′‐bipyridine, i‐C₃H₇OH = iso‐propanol, DMF = N,N‐dimethylformamide) were first obtained and characterized by single crystal X‐ray crystallography. Although the results show that all the complexes 1–3 have one‐dimensional chains formed via coordination bonds, unique three‐dimensional supramolecular structures are formed due to different coordination modes and configuration of the dbsf^2? ligand, hydrogen bonds and π–π interactions. Iso‐propanol molecules are in open channels of 2 while larger empty channels are formed in 3 . As compared with emission band of the free H₂dbsf ligand, emission peaks of the complexes 1–3 are red‐shifted, and they show blue emission, which originates from enlarging conjugation upon coordination. Copyright © 2006 John Wiley & Sons, Ltd.     

Synthesis and nuclear magnetic resonance analysis of starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers

A new biodegradable starch graft copolymer, starch‐g‐poly(1,4‐dioxan‐2‐one), was synthesized through the ring‐opening graft polymerization of 1,4‐dioxan‐2‐one onto a starch backbone. The grafting reactions were conducted with various 1,4‐dioxan‐2‐one/starch feed ratios to obtain starch‐g‐poly(1,4‐dioxan‐2‐one) copolymers with various poly(1,4‐dioxan‐2‐one) graft structures. The microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was characterized in detail with one‐ and two‐dimensional NMR spectroscopy. The effect of the feed composition on the resulting microstructure of starch‐g‐poly(1,4‐dioxan‐2‐one) was investigated. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3417–3422, 2004     

质子滴线区新的缓发质子先驱核121Ce

藉助核反应⁹²Mo(³²S ,3n)产生了未知的缓发质子先驱核¹²¹Ce ,并利用氦喷嘴快速带传输系统和“p-γ”符合方法对它进行了鉴别 .测定了¹²¹Ce的半衰期 ( 1.1±0 .1 )s,观测了它的β缓发质子能谱 ,粗略地估计了它的β缓发质子衰变道的分支比约为1% .首次观测了先驱核¹¹⁹Ba,¹²¹Ba和¹²²La经过β缓发衰变在“子核”中产生的低位能级到基态的γ 跃迁.     

Synthesis and characterization of novel perfluorinated polyimides with 3D‐controlled structures for photonic applications

We have designed and synthesized novel perfluorinated polyimides with 3D controlled structure. At first, we successfully developed the new synthetic routes to diamines with pendant bulky perfluorinated aromatic units in a multi‐step synthetic procedure. Novel perfluorinated polyimides were prepared in a two‐step reaction in N‐methyl‐2‐pyrrolidinone (NMP) solution: The first step was for the synthesis of polyamic acids (PAAs) and the second reaction was for the imidization of PAA. The polymer yield was over 89% and the inherent viscosity of PAAs was in the range of 0.24–0.36 dL/g. The thin films were prepared by spin‐coating the PAA solution in NMP onto various substrates such as a Si wafer or a KBr pellet, dried at 80 °C and further cured at 230 °C. The resultant polyimides are thermally stable over 400 °C. The refractive index and birefringence of the resultant polyimides are 1.5858–1.6452 and 0.01–0.005, respectively. The refractive index of polyimide decreases with increasing the fluorine content. The copolymerization and the ether linkages into the backbone reduce the birefringence of polyimides. Surprisingly, the pendant ether linkage is not a crucial factor in reducing the polyimide birefringence. Their birefringence is comparatively very low, compared with that of previous polyimides. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 1326–1342, 2006