一维梯状配合物{[Cu2（4,4′-bpy）3（p-Ab）2（H2O）2]·（NO3）2·4H2O}n的晶体结构

合成了一维分子梯状配合物{[Cu2(4,4′-bpy)3(p-Ab)2(H2O)2].(NO3)2.4H2O}n(4,4′-bpy=4,4′-联吡啶,p-Ab-=对氨基苯甲酸根离子),该配合物晶体属单斜晶系,P2(1)/c空间群,晶胞参数:a=1.1107(5)nm,b=1.5504(3)nm,c=1.4509(3)nm,β=104.81(3)°,V=2.4155(12)nm3,Z=2.铜离子周围有3个氧原子和3个氮原子与之配位,其中2个氧原子由对氨基苯甲酸的螯合氧原子提供,另一个氧原子由配位水提供,3个氮原子分别由三个4,4′-联吡啶提供.这六个原子在铜离子周围形成一个畸变的八面体配位环境.配体对氨基苯甲酸只有一种配位形式——双齿螯合,第二配体4,4′-联吡啶的两个氮原子均参与配位,将配合物组装成一维分子梯结构.     

分散固相萃取结合气相色谱-高分辨质谱快速筛查酱油中多种氯丙醇

建立了酱油中1，3-二氯-2-丙醇、2，3-二氯-1-丙醇、3-氯-1，2-丙二醇和2-氯-1，3-丙二醇的分散固相萃取-气相色谱-高分辨质谱快速筛查检测方法。样品采用乙酸乙酯提取，提取液浓缩后经N-丙基乙二胺净化，气相色谱-高分辨质谱测定，内标法定量。结果表明，该方法对于酱油中4种氯丙醇的定量限为0.5~10 μg/kg。在3个浓度水平下的加标回收率为78%~103%；相对标准偏差均不大于8.8%。该方法快速、简便、准确、灵敏，可作为酱油中4种氯丙醇的有效检测方法。     

Eu1—xTbxBa2Cu3O7—δ中Tb离子价态的研究

研究了BaTbO_3、Tb_4O_7、TbFeO_3的Tb_(4d)XPS谱,找到了表征Tb~(3+)、Tb~(4+)的特征峰,得出的高、低结合能峰强之比与Tb~(4+)/Tb含量间的依赖关系,可用于确定Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中“123”相的Tb离子混合价态,用常压高温烧结法,未能获得纯“123”单相,也不易获得纯利Tb~(3+)价态样品.在Eu_(1-x)Tb_xBa_2Cu_3O_(7-δ)中的Tb以Tb~(3+)、Tb~(4+)混合价态存在;当x=0.3时,Tb~(4+)/Tb=0.61.引入Tb~(4+)后“123”主相Cu(2)-O(2)平面上的O_(2p)空穴数降低,这是Tb~(4+)破坏超导电性的一种可能原因。     

The Intelligent Properties of Micro－reactors for Preparating Nanoparticles

TiO2 nanoparticles were synthesized by using micro-reactors. The shape and size of the nanoparticles produced from the original micro-reactors and the five times recycled micro-reactorsmother liquor were investigated on transmission electron microscopy (TEM) by using the original sample, freeze prepared sample, and dyeing treated sample, respectively. UV-VIS spectrometry was used to study the growth process of TiO2 nanoparticles in main reactors. The results showed that micro-reactors with nanometer magnitude had spherical or oval structures, and could restore to their original structure after they were destroyed. The products prepared in the original micro-reactors were similar to that in the micro-reactors recycled for many times, suggesting that the micro-reactors had memory function.     

Exact Fixed-node Quantum Monte Carlo： Self-optimizing Procedure

In this paper, a novel exact fixed-node quantum Monte Carlo (EFNQMC) algorithm was proposed, which is a self-optimizing and self-improving procedure. In contrast to the previous EFN-QMC method, the importance function of this method is optimized synchronistically in the diffusion procedure, but not be-fore beginning the EFNQMC computation. In order to optimize the importance function, the improved steepest descent tech-nique is used, in which the step size is automatically adjustable.The procedure is quasi-Newton type and converges super linear-ly. The present method also uses a novel trial function, which has correct electron-electron and electron-nucleus cusp condi-tious. The novel EFNQMC algorithm and the novel trial func-tion are employed to calculate the energies of 1 ^1A1 state of CH2, ^1Ag state of Cs and the ground-states of H2, LiH, Li2 and H2O.     

α—Keggin结构钼硅酸两电子还原杂多蓝的合成及晶体结构

用电解还原法制得标题化合物H6SiMoγ2Moи10O10·10H2O,该晶体为深蓝色,属三斜晶系,P1空间群,晶胞参数:a=1.4077(3)nm,b=1.4176(3)nm,c=1.3752(2)nm;α=111.04(1)°;β=93.99(1)°,γ=119.09(1)°;Z=2,R=0.52.分析结果表明,钼硅酸还原后八面体有所畸变.     

EPR-g-PS热塑弹性体的形态结构

电子显微镜观察表明,以乙丙橡胶(EPR)为主干,聚苯乙烯(PS)为支链的接枝共聚物EPR-g-PS的基本形态是高度分散的聚苯乙烯微区(约几百?)存在于乙丙橡胶连续相中的两相体系,随接枝共聚物中聚苯乙烯含量增加,微区形态发生变化,少量的接枝共聚物在PS与EPR共混物中起“增容剂”作用,使分散相微区变得小而均匀,多重玻璃化转变的存在进一步证实了接枝共聚物相分离的形态结构。     

单核铁(Ⅲ)双卟啉配合物在溶液中的构象平衡及其对环己烷羟化反应的催化活性的影响

合成及表征了一系列以柔韧碳氢链相连不同长度的ｐ／ｐ型单核铁（Ⅲ）双卟啉配合物，以可见光谱首次观察到该系列配合物在氯仿溶液中开放式及闭合式构象的平衡，发现６８０ｎｍ处吸收峰强度与这种构象平衡有关，烷氧链越长，该吸收峰强度越大．利用该类配合物模拟了细胞色素Ｐ４５０单加氧酶对环己烷的羟化作用，催化结果表明，在以分子氧为氧源及还原剂存在的温和条件下，该类配合物的催化活性显著高于单核铁卟啉（ＦｅＴＰＰＣｌ），随着柔韧碳氢链长度的增加，双卟啉的催化活性依次增加．高的催化活性与双卟啉配合物在溶液中的构象平衡，即闭合式构象引起的立体位阻及电子转移有关．     

AN/St悬浮共聚体系中AN在水/油两相间分配及其对共聚物组成的影响

研究了丙烯腈/苯乙烯(AN/St)悬浮共聚体系中AN在水/油两相间的分配及其对AN/St共聚物组成的影响.结果表明,AN分配于水/油两相间,使油相AN的含量低于相同单体配料比的本体聚合,导致生成的AN/St共聚物组成偏离本体共聚.为了准确预测进而控制AN/St悬浮共聚物的组成,提出了在考虑AN相分配的基础上计算AN/St悬浮共聚物组成的模型.计算结果与实验值一致,计算中用到的油相实际竞聚率与本体聚合相同,但该悬浮聚合的表观竞聚率随水/油比的变化而发生较大改变.     

疏水缔合型增稠剂聚(丙烯酰胺-丙烯酸高级酯)的合成及增稠性能研究

采用沉淀聚合法合成了聚（丙烯酰胺－丙烯酸十四酯），聚（丙烯酰胺－丙烯酸十六酯）和聚（丙烯酰胺－丙烯酸十八酯），重点讨论了共聚物中疏水基团数量及疏水基团链长对增稠性能的影响。采用凯达尔定氮法和动态热分析（DMTA）测定了共聚物的组成及玻璃化温度。