FDU-15-Pt composites with different Pt loading and their electrocatalytic reduction to ultratrace nitroaromatic compounds

FDU-15 is a hexagonal mesoporous material with nanometer-sized, highly ordered arrays and large special surface area. In this work, FDU-15-Pt with 2.0%, 5.0% and 8.0% Pt loading were synthesised and used for electrochemical detection of trace nitroaromatic compounds (NACs). The FDU-15-Pt samples were characterised by CO Chemisorption, transmission electron microscopy (TEM) and X-ray diffraction (XRD). It has been demonstrated that FDU-15-Pt with 2.0% Pt loading has the smallest Pt particle size of 2.9?nm, highest Pt metal dispersion of 37.7% and largest Pt metal surface area of 21.36?m^2?g^?1. The FDU-15-Pt/PDDA modified electrode were assembled by electrostatic adsorption of Poly (diallyldimethylammonium chloride) (PDDA) and FDU-15-Pt. The 2.0% FDU-15-Pt modified sensor showed higher selectivity for NACs than those of 5.0% and 8.0% FDU-15-Pt, which were verified by electrochemical experiments. A linear response over TNT concentration ranging from 8.8?×?10^?9?M to 1.2?×?10^?5 M was exhibited with a low detection limit of 2.9?×?10^?9?M (S/N?=?3). Moreover, the proposed 2.0% FDU-15-Pt/PDDA modified sensor has been applied to the detection of NACs in spiked environmental water samples and shows promise for fast and accurate determination of trace NACs in real samples.     

Simultaneous determination of cyromazine,melamine and their biodegradation products by ion-pair high-performance liquid chromatography

An ion-pair high-performance liquid chromatography with ultraviolet detection method for the determination of cyromazine, melamine and its biodegradation products (ammeline, ammelide, cyanuric acid and biuret) was developed. C18 column was utilised to separate the six analytes with a mobile phase consisting of perchloric acid-ammonia solution and acetonitrile, under gradient elution and variable flow rate. The detection wavelengths were 205 nm for cyanuric acid and biuret and 222 nm for cyromazine, melamine, ammeline and ammelide. For analysis of sediment samples, the extraction solution containing acetonitrile, ammonia and water (80:10:10 by volume) was used to extract the analytes from sediment matrix. Using the extraction method for the spiked sediment sample, high linearity of matrix-matched standard curve could be obtained for the six analytes. The method detection limit was 0.1 μg g^?1 for melamine and cyromazine, 0.2 μg g^?1 for ammeline and ammelide, 1.2 μg g^?1 for cyanuric acid and 1.0 μg g^?1 for biuret in sediment matrix. The recoveries of these compounds were 70.1–98.3% and the relative standard deviations were 0.5–4.4%. Finally, the proposed method was successfully applied to the analysis of the sediment sample near the wastewater outlet of a melamine-producing factory.     

Synthesis and characterization of a series of chiral NHC–Pd complexes derived from l-phenylalanine

The synthesis of a series of chiral Pd(L)PyBr₂ (3a–3e) and Pd(L)PyCl₂ (4d and 4e) complexes from l-phenylalanine is presented (L = (S)-3-allyl-4-benzyl-1-(2,6-diisopropylphenyl)-imidazolin-2-ylidene (a), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-2-ylmethyl)imidazolin-2-ylidene (b), (S)-4-benzyl-3-(biphenyl-4-ylmethyl)-1-(2,6-diisopropylphenyl)imidazolin-2-ylidene (c), (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(naphthalen-1-ylmethyl)imidazolin-2-ylidene (d) or (S)-4-benzyl-1-(2,6-diisopropylphenyl)-3-(2,4,6-trimethylbenzyl)imidazolin-2-ylidene (e). The complexes were characterized by physicochemical and spectroscopic methods, and the X-ray crystal structures of 3a–3c and 4d are reported. In each case, there is a slightly distorted square-planar geometry around palladium, which is surrounded by imidazolylidene, two trans halide ligands and a pyridine ligand. There are π–π stacking interactions in the crystal structures of these complexes. Complex 3a showed good catalytic activity in the Cu-free Sonogashira coupling reaction under aerobic conditions.     

Synthesis, crystal structures, and magnetic properties of tetranuclear nickel(II) and copper(II) complexes with tridentate Schiff bases

Two cubane-type tetranuclear nickel(II) and copper(II) complexes, [Ni₄(L¹)₄(CH₃OH)₄] (1) and [Cu₄(L²)₄]·H₂O (2), where L¹ and L² are the dianionic forms of the tridentate Schiff bases 4-nitro-2-[(2-hydroxyethylimino)methyl]phenol (H₂L¹) and 5-methoxy-2-[(2-hydroxyethylimino)methyl]phenol (H₂L²), respectively, have been synthesized and characterized by physicochemical methods and single-crystal X-ray diffraction. The magnetic properties of the complexes show the presence of ferromagnetic interactions for complex 1 and antiferromagnetic interactions for complex 2, mediated by hydroxyl bridges.     

The (100) orientation evolution and temperature-dependent electrical properties of Bi(Zn1/2Ti1/2)O3–PbTiO3 ferroelectric films

The 0.2Bi(Zn_1/2Ti_1/2)O₃–0.8PbTiO₃ (0.2BZT–0.8PT) ferroelectric thin film was successfully fabricated on Pt(111)/Ti/SiO₂/Si substrates by a sol–gel method. The result indicates that the film exhibits the (100) preferred orientation and has a relatively dense and uniform microstructure with a thickness of ~230 nm. The formation mechanism of the oriented films was ascribed to the growth of the (100) oriented PbO layer at ~450 °C during a layer-by-layer crystallization process. Temperature-dependent electrical properties of the 0.2BZT–0.8PT films were investigated, showing that the film has a potential for high temperature applications.     

Excellent degradation performance of azo dye by metallic glass/titanium dioxide composite powders

The metallic glass/titanium dioxide powders (MG/TiO₂) with enhanced photocatalytic oxidation activity were synthesized, which exhibit a higher efficiency in decolorizing methylene blue solutions (MB). Compared with the pure TiO₂ and crystalline alloy/TiO₂ (CA/TiO₂) under the same circumstances, its degradation rate was 60 % and 30 % higher, respectively. Furthermore, compared with the CA/TiO₂, the MG/TiO₂ photocatalytic rate was three times faster when decolorizing MB. Considering the excellent intrinsic high-performance photocatalytic degradation under visible light irradiation, these novel powders were proven to have potential applications in water purification industry.     

Fast Reductive Amination by Transfer Hydrogenation “on Water”

Reductive amination of various ketones and aldehydes by transfer hydrogenation under aqueous conditions has been developed, by using cyclometallated iridium complexes as catalysts and formate as hydrogen source. The pH value of the solution is shown to be critical for a high catalytic chemoselectivity and activity, with the best pH value being 4.8. In comparison with that in organic solvents, the reductive amination in an aqueous phase is faster, and the molar ratio of the substrate to the catalyst (S/C) can be set as high as 1×10⁵, the highest S/C value ever reported in reductive amination reactions. The catalyst is easy to access and the reaction is operationally simple, allowing a wide range of ketones and aldehydes to react with various amines in high yields. The protocol provides a practical and environmental friendly new method for the synthesis of amine compounds.     

Highly Stereoselective Conjugate Addition and α‐Alkynylation Reaction with Electron‐Deficient Alkynes Catalyzed by Chiral Scandium(III) Complexes

The highly Z‐selective asymmetric conjugate addition of 3‐substituted oxindoles to alkynyl carbonyl compounds has been developed by using scandium complexes of chiral N,N′‐dioxides under mild conditions. The thermodynamically unstable Z‐olefin derivatives were obtained in excellent yields and high enantiomeric and geometric control. The catalyst was also found to be effective in the asymmetric acetylenic substitution reaction of 3‐substituted oxindoles, giving excellent enantioselectivities.     

Distinct Stepwise Reduction of a Nickel?Nickel‐Bonded Compound Containing an α‐Diimine Ligand: From Perpendicular to Coaxial Structures

A nickel? nickel‐bonded complex, [{Ni(μ‐L^.?)}₂] ( 1 ; L=[(2,6‐iPr₂C₆H₃)NC(Me)]₂), was synthesized from reduction of the LNiBr₂ precursor by sodium metal. Further controllable reduction of 1 with 1.0, 2.0 and 3.0 equiv of Na, respectively, afforded the singly, doubly, and triply reduced compounds [Na(DME)₃] ? [{Ni(μ‐L^.?)}₂] ( 2 ; DME=1,2‐dimethoxyethane), [Na(Et₂O)]Na[(L^.?)Ni? NiL^2?] ( 3 ), and [Na(Et₂O)]₂Na[L^2?Ni? NiL^2?] ( 4 ). Here L represents the neutral ligand, L^.? denotes its radical monoanion, and L^2? is the dianion. All of the four compounds feature a short Ni? Ni bond from 2.2957(6) to 2.4649(8) Å. Interestingly, they display two different structures: the perpendicular ( 1 and 2 ) and the coaxial ( 3 and 4 ) structure, in which the metal? metal bond axis is perpendicular to or collinear with the axes of the α‐diimine ligands, respectively. The electronic structures, Ni? Ni bonding nature, and energetic comparisons of the two structure types were investigated by DFT computations.     

滑动弧电极放电等离子体作用甲烷制C2烃的工艺

采用刀片式不锈钢电极放电反应器,以Ar气为稀释气,研究了等离子体作用下甲烷转化制C2烃的工艺条件。考察了CH4流量、高频电源输入电压和电极间距等参数对甲烷转化率、C2烃选择性、收率和反应表观能耗的影响。结果表明,增加CH4流量,表观能耗随之降低;当输入电压和电极间距较小时,甲烷转化率随输入电压和电极间距的增大而增大,但输入电压和电极间距过大时,C2烃收率明显下降,积碳严重。在CH4流量14 mL/min、Ar气流量60 mL/min、高频电源输入电压22 V、电流0.44 A、电极间距4 mm的优化条件下,甲烷最高转化率为43.1%,C2烃收率、选择性和表观能耗分别为40.1%、93.2%和2.41 MJ/mol。C2烃中不饱和烃的体积分数可达95%以上。