Capacitance of Organic Schottky Diodes Based on Copper Phthalocyanine （CuPc）

The capacitance of an organic Schottky diode based on copper phthalocyanine （CuPc） is investigated. Based on the organic small-signal equivalent model established, we calculate the reverse capacitance CMetal Of the organic Schottky diode with different kinds of metal cathodes （Mg, Al, Au）. It is found that the reverse capacitance of the organic Schottky diode shows behavior as CMg 〉 CAl 〉 CAu at the same frequency, and according to our analysis, the reverse Schottky junction capacitance Cj is expected to have little effect on the reverse capacitance of the organic Schottky diode, and the space-charge limited current capacitance Us is considered to dominate the reverse capacitance, which limits the improvement of frequency characteristics of organic Schottky diodes.     

关于G逆半群的构造

本文讨论一类重要的半群即Ｇ逆半群,文中给出Ｇ逆半群的主要的几例子,并详尽地讨论了Ｇ逆半群的构造。     

Acoustic absorbers at low frequency based on split-tube metamaterials

The remarkable properties of acoustic metamaterials have attracted massive researches and applications, especially on low-frequency sound absorptions. Currently, most of the acoustic metamaterial absorbers employ resonances in plastic cavities, and their structural strengths are important in many circumstances, especially in harsh environment. However, studies of metamaterials including this point are very scarce. Here, we propose an acoustic metamaterial for low-frequency (<500 Hz) absorptions, composed of three nested square split tubes with inverted opening directions. The efficiency of the absorber is investigated both numerically and experimentally, and absorptions at the peeks are found to exceed 90% and the frequency can be effectively adjusted by tuning its geometric parameters. We further test its yield strength under compression and confirm its buckling behavior happens from the outmost layer. This tunable acoustic metamaterial with a fairly good mechanical strength may lead to broad applications in noise reduction.     

Selective Excitation of Band Extrema in Valley Photonic Crystals

Flexible control of building blocks of photonic crystals enables achieving desirable band structures. Exploration of photonic band extrema has brought many fantastic features to design artificial optical materials, such as Brillouin‐zone‐corner extrema for valley photonic materials and zone‐center extremum for zero‐index metamaterials. However, two such kinds of extrema are always found independently in different photonic crystals. In this work, a kind of valley photonic crystals possessing both zone‐center and zone‐corner band extrema almost at the same frequency is proposed. Inspired by antennas theory, a three‐antenna array (TAA) source is devoted to individually manipulate each extremum. The correlation coefficient is given to determine the coupling efficiency between the TAA source and extrema eigenmodes. By using a source with a high correlation coefficient, these extrema bulk states are selectively excited consistent with their eigenfields. Furthermore, three control cases are shown that multiple extrema points are simultaneously excited, in order to confirm the validity of the correlation coefficient. Finally, a potential application of a beam‐steering device is proposed through selective excitation of ternary extrema. This work develops binary valley states into ternary mix states, rendering more degrees of freedom for on‐chip optical information transport, particularly for beam steering and mode division multiplexing.     

拉曼光谱编码的荧光液相生物芯片检测系统研究

随着医疗诊断需求的增加,生物分子检测技术越来越受到人们的重视,液相生物芯片技术作为一种高通量,多通道的分子检测手段在近几年得到了飞速发展。通过层层自组装方法制备以微片为载体的拉曼光谱编码液相生物芯片,并利用自行搭建的一套高灵敏度、高分辨率的光学系统,实现对液相生物芯片的定性与定量分析。光学系统由拉曼光谱检测系统与荧光显微成像系统耦合而成。在拉曼光谱检测系统中激光器发射出785nm波长的激光,通过二向色镜,带反反射镜与物镜汇聚到样品上,样品产生的拉曼散射光,经物镜,带反反射镜,二向色镜与拉曼滤波片,最后通过凹透镜聚焦到光谱仪的狭缝上,光谱仪色散实现在线阵CCD上拉曼光谱的获取。荧光显微成像系统应用光学成像原理,通过调节凹透镜与405nm的激发光之间的距离,使激发光通过物镜均匀的照射到样品之上,样品激发出的荧光,通过物镜,带反反射镜,二向色镜,滤波片与相应的凹透镜,最后成像到面阵CCD上。改进传统便携式拉曼光谱检测系统光路并选用相应波段的带反反射镜与焦距20倍的物镜完成拉曼光谱检测系统与荧光显微成像系统的耦合。为了减少两路系统之间的相互影响选用合适的二向色镜以及滤波片,在提高耦合系统获取数据的准确性中有着重要的作用。该系统通过对反应之后的液相生物芯片进行拉曼光谱检测,以完成对每个编码玻片的定性识别,即解码;同时激发反应后液相生物芯片的荧光并采集荧光强度图,根据每个解码玻片上的荧光强度值完成对目标检测物的定量分析。区别于传统荧光编码液相生物芯片,拉曼光谱编码具有稳定性更强,光谱分辨率更高等优点。该光学系统集拉曼光谱检测系统与荧光显微成像系统于一体,解决了目前未有基于拉曼编码的液相生物芯片的检测系统的问题,并且可同时对多种目标物进行识别和定量分析,提升了实验结果的准确性。     

周期多孔板的面内振动衰减域及其优化

针对Bragg散射型周期多孔板难以实现较低起始频率并维持较宽衰减域的问题,优化设计了一种含菱形孔的周期多孔板。采用有限元法结合周期边界条件,并运用COMSOL对周期多孔板的面内弹性波频散关系进行计算,通过ANSYS模拟有限尺寸周期多孔板的频率响应,将周期多孔板悬吊进行了正弦波激励的振动试验。研究结果表明,含菱形孔的周期多孔板相比于含圆形和六边形孔的周期多孔板具有更宽的衰减域;材料属性对衰减域影响较大,丁晴橡胶和硅橡胶易于获得低频衰减域;孔隙率的增大有利于获得低频宽带的衰减域;增大菱形孔水平夹角能获得较宽的衰减域。对衰减域的形成机理分析发现,含菱形孔的周期多孔板同时具有Bragg散射型和局域共振型声子晶体的特性,表明两种衰减域机理具有内在的联系。优化设计的周期多孔板存在一条5281.76 Hz至8824.30 Hz的完全衰减域,经过至少2个周期,振动即得到较明显衰减。数值和试验得到的衰减区具有较高的一致性。该研究为减振降噪板的开发提供了新的思路,且由于制作过程便捷,在改善建筑声环境中具有潜在的应用前景。     

基于数学形态学的数字全息再现像融合方法

针对数字全息中不同再现距离获得的携带不同聚焦信息的再现像, 提出了一种基于数学形态学的多聚焦再现像融合方法, 以有效扩展成像景深。首先通过小波-Controulet变换获得源图像的高频和低频分量;然后, 针对数字全息中含散斑噪声的特点, 对高频分量采用基于数学形态学区域能量的方法进行融合, 对低频分量采用加权对比度法进行融合;最后, 将融合系数反变换得到融合图像。通过对算法的有效性分析和实验验证, 将本文提出的方法与不加入数学形态学的融合方法进行了对比研究。结果表明, 基于数学形态学的融合方法能充分抑制散斑噪声的影响, 保留更多细节信息, 有效扩展了成像景深范围达11.5 cm。其中, 对于表面粗糙且信息量较少的骰子, 基于数学形态学方法的空间梯度算子提高了11.8%, 熵值提高了2.7%;对于表面光滑且信息量较多的硬币, 其空间梯度算子提高了13.6%, 熵值提高了2.8%。     

在同位旋空间中正反质子弹性散射的重整化混合圈链图效应

本文采用描述荷电和中性 pion 介子与核子-反核子强相互作用的同位旋SU(2)不变耦合模型,计算出在 pion0 重整化混合圈链图传播下 p pbar -> p pbar 弹性散射微分截面的“精确”解析结果;并且将此结果与在 pion0 树图传播下的微分截面作了对比分析,得到相应的辐射修正重要信息。本文完成的工作对进一步深入研究 pion 介子与核子-反核子强相互作用的同位旋SU(2)不变耦合模型以及深入理论探讨正反质子对撞实验,都将提供理论研究的参考价值。     

激光单分子探测技术的研究

文中介绍利用激光激发分子荧光的方法探测液体中单个染料分子的新技术，以及作者自行设计和研制的激光单分子探测谱仪。通过探测“光子爆发”，把单个染料分子的荧光同很强的背景杂散光区别开来。进一步用８２ＭＨｚ高重复频率的锁模激光器和时间门符合技术，成功地消除了Ｒａｍａｎ散射光。目前该谱仪达到的检测限为灵敏区内仅有～７个Ｒ６Ｇ分子。