采用多级技术的DBF雷达CCAB算法

数字波束形成算法中,CCAB算法在较高信干噪比条件下具有一定优势。但是计算时需要求逆矩阵,在阵元数较多的情形下运算量极大,很难实时实现,严重制约了其进一步的应用。提出了一种基于原有CCAB算法的多级计算方法,可以有效地减少运算量。实验表明,该方法虽然其信噪比性能比普通CCAB算法有所下降,但是仍能在干扰方向上形成较深的零陷并有效地抑制干扰,能够进一步应用于实际工程中。     

自动传输收视率调查系统

综述了当前收视率调查的主要方法 ,提出一种自动传输的收视率调查系统 ,详细介绍了该系统的组成、原理和设计思想 ,并分析了不同实现方法的优点与不足。应用表明 ,该系统在同类产品中具有明显优势     

STUDY ON PHASE PERCEPTION IN SPEECH

The perceptual effect of the phase information in speech has been studied by auditory subjective tests. On the condition that the phase spectrum in speech is changed while amplitude spectrum is unchanged, the tests show that: (1) If the envelop of the reconstructed speech signal is unchanged, there is indistinctive auditory perception between the original speech and the reconstructed speech; (2) The auditory perception effect of the reconstructed speech mainly lies on the amplitude of the derivative of the additive phase; (3) td is the maximum relative time shift between different frequency components of the reconstructed speech signal. The speech quality is excellent while td <10ms; good while 10ms< td <20ms; common while 20ms< td <35ms, and poor while td >35ms.     

数码相机原理与系统设计研究

介绍了数码相机的工作原理 ,分析了数码相机的系统结构 ,提出了设计数码相机的处理流程。典型的数码相机系统有镜头、闪光灯、光学取景器、LCD显示屏、图像数据存储扩展设备接口、图像数据传输接口、供电系统以及核心处理器等八个主要模块。数码相机的数据流向从图像传感器开始 ,止于图像数据的存储和传输。数据流的处理主要包括模数转换、光学黑电平钳位、针对镜头的边缘畸变的运算修正、坏像素处理、白平衡处理、伽马校正、色彩合成处理、边缘检测 (锐度检测 )和伪彩色检测 (伪彩色抑制 )、JPEG压缩和图像存储器等模块     

Dependence of ion-pair induced self-pulsing in Er-doped fiber lasers on emission to absorption ratio

We show theoretically that the ion-pair induced self-pulsing in Er-doped fiber lasers depends largely on the ratio of emission to absorption cross sections, and can be significantly suppressed as this ratio is increased. Our experimental results agree qualitatively with this prediction. This result is important for stabilizing Er-doped fiber lasers where short-cavities and high-gain fibers are required.     

面向下一代网络的资源管理与服务开通解决方案

在向下一代网络演进的过程中，网络结构正经历一场深刻的变革。在这一背景下，新的业务种类和丰富多彩的增值服务大量涌现；同时，如何降低成本和改进服务水平也成为服务提供商越来越关注的问题。     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

基于CPX8216硬件平台的GPRS板间切换的实现

GPRS全称通用分组无线业务,它在改进了现有GSM系统后能实现高速的数据传输。首先对GPRS系统做了简单介绍,然后在此基础上详细介绍了GPRS的板间切换在CPX8216硬件平台上的实现方法。     

几种陆用惯性自寻北方案的比较

介绍几种目前广泛应用于军事及民用工业领域的高精度自寻北方案,同时讨论并分析了这些方案的精度和误差补偿方法,提出在兵器领域尤其是在陆用车辆上的适用性等问题。     

Bright Blue Light—emitting Diodes Based on a Novel Fluorescent Dye Containing Heterocyclic Groups

Novel molecular material ,1-benzothiazoly-3-pheny1-pyrazoline (BTPP) was found to function as bright blue light emitting dye in organic electroluminescent device, and its optical and electric characteristics were investigated. This heterovyclic compound exhibited good characteristics of blue photoluminescence and electroluminescence,which had the emission peak at 450nm .The single layer light-emitting devices using BTPP as light -emitting material dispersed in poly(N-vinylcarbazole)(PVK) and double layer ones using PBD as hole block layer above the light-emitting layer were fabricated using conventional spin-casting and vaccum vapour deposition methods. The introduction of PBD has enhanced electron injection and luminance efficiency, compared with the single layer LEDs.