Optical bistability and set-reset operation of a Fabry-Perotsemiconductor laser amplifier with two detuned light injections

Optical bistability in a Fabry-Perot semiconductor laser amplifier when two optical inputs detuned from the resonant wavelength of a semiconductor laser amplifier are injected is discussed. A split branch is found in the optical output versus input characteristics in addition to conventional optical bistability behavior. It is shown analytically and experimentally that set and reset can be achieved in the optical output of the semiconductor laser amplifier for each wavelength by applying two detuned optical pulses and using the split branch     

Magneto-Optical Measurement of Organic Conductor Using Rotational Cavity System

We have developed a new magneto-optical measurement system using a rotational cavity system equipped with a millimeter vector network analyzer and a 14 T solenoid type super conducting magnet. The measurement can be performed in the transmission configuration down to 1.6 K. The results of the precise angular dependence measurement of quasi-one-dimensional organic conductor (DMET)₂I₃ using the new system are shown, and its Fermi surface will be discussed in connection with the previous reports.     

Structure and optical properties of lead iodide based two-dimensional perovskite compounds containing fluorophenethylamines

Phenethylammonium-based perovskites, which can be regarded as a semiconductor/insulator multiple quantum well consisting of lead halide semiconductor layers sandwiched between phenethylammonium insulator layers were prepared. To investigate the effects of the electronic state and the orientation of organic insulator layers on the optical properties of layered perovskites, fluorine substituted analogues were also prepared. The structure and optical properties were investigated by the XRD, UV–Vis absorption, and fluorescence measurements. The exciton absorption peak was shifted by the substitution of fluorine atoms in organic ammonium compounds. It became clear that the optical properties of two-dimensional perovskite compounds were controlled by the substitution of fluorine atoms.     

Effect of d-limonene on the amounts of ethanol and indomethacin penetrated from aqueous gel ointments to rat skin.

The amounts of d-limonene, ethanol and indomethacin (IMC) which were transferred from aqueous gel ointments to the skin were determined in rats. The concentration of IMC in the skin correlated well with the plasma concentration of IMC percutaneously absorbed from the gel ointment. The increase of d-limonene concentration in the gel ointments was directly proportional to the accumulation of ethanol in the skin. The amount of ethanol in the skin was closely associated with the percutaneous absorption of IMC. As a possible mechanism for enhancement action of d-limonene and ethanol, it was considered that, at first, d-limonene penetrates into the skin under coexistence with ethanol and may change the barrier structure of the stratum corneum. The transfer of ethanol to the skin is thereby enhanced under the coexistence of d-limonene in the skin. Thus, the permeation of IMC can be promoted due to its affinity with ethanol.     

Separation of fulvic acid from soil extracts based on ion-pair formation with a cationic surfactant.

A novel method for separating fulvic acid (FA) from soil extracts is proposed. The FA, defined as the acid-soluble fraction of an alkaline extract of soil, was separated based on the precipitation of an ion-pair with a cationic surfactant, such as domiphen bromide. The precipitate was dissolved in aqueous HCl to produce H+ -type FA and a surfactant chloride (SUR-Cl). SUR-Cl, in the aqueous solution, was removed by extraction with CHCl3. After the aqueous phase was passed through a cation-exchanger (H+ -type), H+ -type FA (FA-SUR) was obtained as a powder by lyophylization. The chemical characteristics of FA-SUR were compared with an FA sample separated according to the method of the International Humic Substances Society using a DAX-8 resin (FA-DAX). The oxygen content, O/C atomic ratio and total acidity of the FA-SUR were significantly larger than the corresponding values for FA-DAX. The solid-state CPMS 13C NMR spectra indicated that the higher oxygen content of the FA-SUR could be due to alcoholic hydroxyl groups and polysaccharides as well as carboxylic groups. These results show that FA-SUR is more polar and hydrophilic than FA-DAX.     

Polymerization of vinyl acetate in fatty acids and properties of poly (vinyl alcohols) derived from the poly (vinyl acetates)

Polymerization of vinyl acetate (VAc) in various fatty acids (carbon numbers 4–18) was carried out. Chain transfer constants to the acids were determined to be 20–35×10^–4, from which the constant to a methylene group was obtained to be 0.73×10^–4. Viscometry in aqueous solution of derived poly (vinyl alcohol) (PVA) showed the usual behavior in terms of Huggins constant obtained by the Schulz–Blaschkes equation for PVAs derived from fatty acid systems lower than hexadecanoic acid. PVA derived from octadecanoic acid system showed abnormality, indicating association of alkyl groups. Contact angles on surfaces of PVAs cast from aqueous solutions were measured. While those of PVA derived from lower acid systems were 62°, those of PVAs derived from higher aids were higher and increased to 92° with increase in carbon number to octadecanoic acid. Alkyl groups in the PVAs were estimated to appear on the surfaces. Surface tension of aqueous solution of the PVA derived from octadecanoic acid showed high surface activity, and depended on pH of the solution, indicating the presence and cleavage of lactone ring at the combined portion between PVA and the acid.     

SCF MO INDO calculation of g-tensors of some σ-type radicals

The Longuet-Higgins and Pople type SCF MO theory was applied to the all-valence-electron systems of several -type radicals and their g-tensors were theoretically calculated with the Stone's equation. Principal values or diagonalyzed g-tensors were obtained and compared with experimental values in ESR spectra.     

Vacuum fusion determination of micro-quantities of bulk gases in low carbon iron without an effect of surface gases

Summary Vacuum Fusion Determination of Micro-quantities of Bulk Gases in Low Carbon Iron Without an Effect of Surface Gases Micro-quantities of bulk and surface oxygen and hydrogen in low carbon iron was simultaneously determined by the surface-area-variation method using vacuum fusion analysis. Among the difference of three surface treatments, silicon carbide abrasive, electropolishing and hydrogen reduction methods, bulk oxygen and hydrogen were in agreement within their errors, however, surface oxygen and hydrogen were influenced from the surface treatments. Even in the case of electropolishing, which gave the smallest surface oxygen value, bulk oxygen less than 10g/g is needed to discriminate from the surface oxygen. Bulk hydrogen of 0.03g/g was determined without the effect of surface hydrogen in the hydrogen reduction treatment.     

Mass spectral study on thiazolo[3,2-a]benzimidazoles. Studies on heterocyclic compounds. IV

Condensation of α-halocarbonyl compounds and 2-mercaptobenzimidazole gives thiazolo-[3,2-a]benzimidazoles. This condensation occurred at the mercapto group of the benzimidazole followed by cyclization to form the thiazole ring. This was confirmed by the examination of the mass spectra of 2- and 3-methylthiazolo[3,2-a]benzimidazoles, 2- and 3-phenylthiazolo[3,2-a]-benzimidazoles, and their derivatives.     

Towards the selective formation of specific isomers of fullerenes: T - and p-dependence in the yield of various isomers of fullerenes C60–C84

Systematic fractional change in the yield of various isomers of fullerenes was revealed to strongly depend on temperature of a buffer gas. A new kinetic consideration is proposed for understanding the observed temperature- and pressure-dependence of yield of fullerenes. The model consists of three competitive reactions in consideration of plausible behaviors of a precursor, (1) decomposition into smaller fragments, (2) isomerization leading to formation of a stable fullerene cage, and (3) growth into a larger carbon cluster. Arrhenius activation energy of formation of stable fullerenes was determined to be 0.8 eV for both C₆₀ and C₇₀, while a higher energy of 2.0?3.3 eV for seven different isomers of higher fullerenes ranging from C₇₆ to C₈₄. Correlation in the activation energy is noted for a series of higher fullerenes with different sizes, suggesting the existence of a specific precursor in their formation processes.