胶体粒子的机械性能调控及其在药物递送中的应用

胶体粒子是肿瘤治疗中最常用的载体, 尽管在过去的研究中不同的胶体粒子已经被广泛报道, 但如何进一步提高胶体粒子的药物递送效率仍然存在着一些挑战. 大量的研究表明胶体粒子的尺寸、形状、结构和表面化学等物理化学性质在药物递送过程中具有重要的作用, 但胶体粒子的机械性能对药物递送过程的影响研究和综述相对较少. 本综述从不同机械性能胶体粒子的制备与表征出发, 概述了胶体粒子的机械性能对血液循环、肿瘤富集、渗透以及细胞内化过程的影响, 并对该领域存在的问题以及发展的趋势进行了展望. 该综述有助于帮助科学工作者更好地理解胶体粒子的机械性能对药物递送的影响规律, 从而优化胶体粒子的设计并提高纳米药物的递送效率和生物利用率.     

高分散Co0.2Ni1.6Fe0.2P助催化剂改性P掺杂g-C3N4纳米片高效光催化析氢的研究

随着化石燃料使用的增加和温室气体排放量持续上升,20世纪以来气温上升得更快。开发环境友好型能源取代传统化石燃料是当务之急。氢能源作为一种清洁、高效的能源,被认为是最有希望取代传统化石燃料的能源。光催化水分解水产氢作为为一种环保型技术被认为是最有前景的氢能生产方法。提高光生电子-空穴对分离效率是构建高效光催化剂的关键。然而,利用高度分散的助催化剂构建高效、稳定的产氢光催化剂仍然是一个挑战。本文首次成功地采用一步原位高温磷化法制备了高度分散的非贵金属三金属过度金属磷化Co_0.2Ni_1.6Fe_0.2P助催化剂(PCNS-CoNiFeP)掺杂P的石墨相氮化碳纳米片(PCNS)。有趣的是,PCNS-CoNiFeP与传统氢氧前驱体磷化法制备的CoNiFeP相比,没有聚集性,分散性高。X射线衍射(XRD)、X射线光电子能谱(XPS)、元素映射图像和高分辨率透射电镜(HRTEM)结果表明,PCNS-CoNiFeP已成功合成。紫外-可见吸收光谱结果表明,PCNS-CoNiFeP在200–800 nm波长范围内较PCNS略有增加。光致发光光谱、电化学阻抗谱(EIS)和光电流分析结果表明,CoNiFeP助催化剂能有效促进光生电子-空穴对的分离,加速载流子的迁移。线性扫描伏安法(LSV)结果还表明,负载CoNiFeP助催化剂可大大降低CNS的过电位。结果表明,以三乙醇胺溶液为牺牲剂的PCNS-CoNiFeP最大产氢速率为1200 μmol·h^-1·g^-1,是纯CNS-Pt (320 μmol·h^-1·g^-1)的4倍。在420 nm处的表观量子效率为1.4%。PCNS-CoNiFeP在光催化反应中也表现出良好的稳定性。透射电镜结果表明,6–8 nm的CoNiFeP高度分散在PCNS表面。高度分散的CoNiFeP比聚集的CoNiFeP具有更好的电荷分离能力和更高的电催化析氢活性。由此可见,聚合的CoNiFeP-PCNs (300 μmol·h^-1·g^-1)的产氢速率远低于PCNS-CoNiFeP。此外,CNS的P掺杂可以改善其电导率和电荷传输。     

石墨烯玻璃透明薄膜加热特性

Graphene has become a research focus in recent years owing to its excellent characteristics, and glass is a commonly used material with high transparency and low cost. Graphene glass combines the excellent properties of both graphene and glass; graphene glass has not only high thermal conductivity, high electrical conductivity, and good surface hydrophobicity but also exhibits superior electrothermal conversion and wide-spectrum high-light-transmittance characteristics. Therefore, the study of graphene glass films is of theoretical value and practical significance. In this study, a high-purity glass-based (JGS1 quartz glass) multilayer graphene film was developed based on an atmospheric-pressure chemical vapor deposition (APCVD) method, and its electrical characteristics, light transmittance, and electrical heating characteristics were experimentally investigated in detail. The results show that graphene glass with different surface resistance values obtained through direct growth on a high-purity quartz glass substrate using the APCVD method, not only has excellent uniformity and quality, but also has considerably flat and high transmittance across the entire visible light region and exhibits excellent heating performance and fast response time. For graphene glass with a surface resistance of 1500 Ω·sq^-1, the light transmittance can reach 74%, and the saturation temperature can rise to 185 ℃ by applying a bias voltage of 40 V. In addition, when the resistance value of the graphene glass is 420 Ω·sq^-1, the graphene glass reaches a high saturation temperature of 325 ℃ in 40 s, and the corresponding heating rate can exceed 18 ℃·s^-1, achieving a significantly higher heating rate than other heating films at the same voltage. Compared with the polyethylene-terephthalate- (PET-) based and silicon-based graphene films obtained by the transfer, graphene glass has a higher saturation temperature, shorter thermal response time, and faster heating rate. Furthermore, graphene glass exhibits better heating cycle stability and longer-term heating stability at a constant voltage. In addition, an experiment using the graphene glass to thermally tune the wavelength of a vertical-cavity surface-emitting laser was conducted and gave good results. The position of the laser peak controlled by the graphene glass was red-shifted by 1.78 nm by applying a voltage of 20 V, and the wavelength tuning efficiency reached 0.059 nm·℃^-1. Compared with PET-based and silicon-based graphene films, the actual electrical heating capacity of graphene glass increased by 195%. These experimental findings demonstrate that graphene glass transparent films with excellent electric heating characteristics can be used in various transparent electric heating fields and have relatively wide application prospects.     

聚乙烯/氧化铝复合材料形态、流变和力学性能

将聚乙烯（PE）和氧化铝（AO）熔融共混制得综合性能更好的PE/AO复合材料。通过对其进行流变分析、热力学性能分析、力学性能分析、导热性能分析和断面微观结构分析,探究AO质量分数对复合材料结构及性能的影响。结果表明,随着AO质量分数的增加,复合材料逐步转为脆性材料,其弹性模量、屈服强度、导热系数、储能模量同步增加;当AO质量分数为10%时,复合材料的断裂强度为18.2 MPa,综合性能最好。     

气相分子吸收光谱法在地表水氨氮监测中的应用北大核心CSCD

气相分子吸收光谱法测定环境地表水中氨氮含量的标准方法研究还不全面,因此考察了水样的保存、亚硝酸盐、Ca^(2+)、Mg^(2+)、I^(-)、硫化物对其测定结果的影响.结果表明,采集地表水样后立即加入硫酸使水样酸化至pH<2,密闭,可延长样品保存时间至7 d,但尽量在24 h内进行测定;气相分子吸收光谱法测定氨氮水样时,当亚硝酸盐含量较高时,在氨氮除亚氮功能模式下已不能消除干扰,必须在水样分析前采用加热煮沸或预蒸馏前处理方式;水中Ca^(2+)、Mg^(2+)、25倍以下质量浓度的I^(-)和10倍质量浓度以下的硫化物对气相分子吸收光谱法氨氮测定没有显著干扰.本方法的检出限(3.143s)为0.02 mg·L^(-1),按标准加入法进行回收试验,回收率为94.7%~101%,测定值的相对标准偏差(n=6)为0.70%~4.7%.采用气相分子吸收光谱法分析标准样品,其测定结果均在标准样品认定值的允许偏差范围内.与纳氏试剂分光光度法的测定结果相比,预蒸馏-气相分子吸收光谱法具有更好的精密度和准确度.     

Near-infrared Responsive Photoelectrochemical Biosensors

Near-infrared (NIR) light-driven photoelectrochemical (PEC) sensing is a highly promising analytical technique, especially for in situ bioanalysis, due to the deep penetration capability and minimal invasiveness of NIR light. In this mini review, we provide a brief overview of recently developed NIR PEC sensors, focusing on NIR light-responsive materials and the representative applications of this type of PEC sensor. Future perspectives for NIR PEC sensors are also described.     

Fire retarded polyurethane foam composites based on steel slag/ammonium polyphosphate system: A novel strategy for utilization of metallurgical solid waste

A series of FR-RPUF composites were prepared by a one-step water foaming process with ammonium polyphosphate (APP) and steel slag (SS) as flame retardants. Thermogravimetric analysis (TG), limiting oxygen index (LOI), UL-94 vertical combustion test, microscale combustion calorimetry (MCC), TG-Fourier transform infrared spectrometry (TG-FTIR), scanning electron microscopy (SEM), Raman spectra and FTIR were used to investigate the thermal stability, flame retardancy, combustion performance, gas phase products, and char residue morphology of FR-RPUF composites. TG test results showed that the initial decomposition temperature (T_-5wt%) and char residue rate at 700°C of RPUF/APP/SS composites were significantly enhanced by the addition of APP and SS, and the thermal stability of the composites was improved. Flame retardant test results confirmed the significantly increased LOI values of RPUF/APP/SS composites with V-0 rating. TG-FTIR also confirmed the obviously decreased release of toxic gases and flammable gases in the combustion of RPUF/APP/SS composites. SEM and Raman spectra of char residues for the composites suggested that APP/SS system improved the compactness and graphitization degree of char layer for RPUF/APP/SS composite. The above researches provide a new strategy for the utilization of SS in fire safety engineering.     

Flexible strain sensor with ridge-like microstructures for wearable applications

The flexible stretchable sensors have great potential for implementation in various applications, such as intelligent soft robots, health monitoring, and motion detection. However, most of the flexible stretchable sensors with microstructures and high sensitivities are fabricated by expensive templates and complex processes. In consideration of large-scale fabrication, a low cost and efficient way is in great demand. Herein, electroless plating on Nafion films with decent swelling ratios are proposed to fabricate stretchable sensors with wrinkle-structured electrodes. By adding isopropanol (IPA) to the electroless plating process, the H₂O-IPA sensor with larger swelling ratio shows deeper surface wrinkles, higher surface roughness, and better sensitivity to strain. At the same time, the H₂O-IPA sensor exhibit good durability (500 cycles). By mounting the sensor on the joint of human finger, the motion of the finger bending and even the bending degree can be accurately detected, indicating the potential use in the field of wearable devices and soft electronic skins.     

Insight mechanism of nano iron difluoride cathode material for high-energy lithium-ion batteries: a review

Journal of Solid State Electrochemistry - Iron(II) fluoride (FeF2) is a promising candidate as the cathode material for lithium-ion batteries (LIBs) due to its quite high theoretical energy density...     

酞嗪-2-二氰基甲烷鎓盐的串联环化反应及新型六环咪唑并[2,1-a]酞嗪的构建

酞嗪-2-二氰基甲烷鎓盐是一类研究相对较少的1,3-偶极子,目前关于其反应化学的报道主要局限于1,3-偶极环加成反应。本研究发展了一种酞嗪-2-二氰基甲烷鎓盐在1,3-偶极环加成以外的新反应模式,以酞嗪-2-二氰基甲烷鎓盐与取代2-(羟基(苯基)甲基)苯酚为原料,在质子酸的催化下经历[2+4]环加成-串联环化历程,合成了7个不同取代的六环咪唑并[2,1-a]酞嗪产物,其结构经¹H NMR, ¹³C NMR和HR-MS(ESI)表征。