Naryl-substituted anthranilamides with intramolecular hydrogen bonds

Hydrogen bonding interaction as one type of non-covalent force has proven itself to be highly efficient for constructing structurally unique artificial secondary structures. Here, the structure of N_aryl-substituted anthranilamide in solution is demonstrated by various NMR technique, the intramolecular hydrogen bonds between amide attached to arylamine of the same ring is proposed, which is supported by its crystal structure in the solid phase. The substituent on the nitrogen atom of arylamine plays an important role in forming the presence of intramolecular hydrogen bonds. The chemical shift of the N_aryl-H downfield changes obviously, due to the formation of intramolecular hydrogen bonds and the deshielding effect of oxygen, and the neighboring C–H is activated and shows downfield protonic signal too. The presence of intramolecular hydrogen bonds probably provides the explanation for the transformation from N_aryl-substituted anthranilamide to imine, which could be converted into 2-aryl quinazolinone finally.     

Facile solid phase synthesis of N-cycloguanidinyl-formyl peptides

A novel strategy of solid phase synthesis of N-cycloguanidinyl-formyl peptides has been established and investigated which involved coupling orthogonal protected diaminoacid with resin bound peptide, α-amino group deprotection, guanidinylation of α-amino group by bis-Cbz-1H-pyrazole-1-carboxamidine followed by cleavage and cyclization in solution, and finally removing Cbz by palladium catalyzed hydrogenation. Through this method, cycloguanidine could be introduced to either N-terminus or sidechain of designated peptides. The reaction conditions were facile, straightforward, and totally adaptive to common solid phase peptide synthesis strategy.     

Environmental gamma background measurements in China Jinping Underground Laboratory

To determine the environmental gamma background levels which affects rare events experiments, we measured in situ gamma spectrum at four locations in the China Jinping Underground Laboratory. The integral background count rates (40–2,700 keV) varied from 3.76 to 74.1 cps. The average count rate of the measurements inside the CJPL was 73.4 cps. The spectrometer was calibrated with a ¹⁵²Eu point source and Monte Carlo simulation to obtain the activity conversion factors for the rock and the air, respectively. The rocks that surrounded the CJPL was characterized by very low activity concentrations of ²³⁸U (3.69–4.21 Bq kg^?1), ²³²Th (0.52–0.64 Bq kg^?1) and ⁴⁰K (4.28 Bq kg^?1).     

Self-calibration method for cerium-doped lanthanum bromide scintillator detector in the 0.1–2.0 MeV energy range

In recent years, the cerium-doped lanthanum bromide, LaBr₃ (Ce = 5 %) detector is increasingly playing an important role in radiation measurements because of its higher energy resolution (~3 % at 662 keV), faster luminescence decay time (~35 ns) and higher detection efficiency compared to 7.65 cm × 7.65 cm NaI(Tl) detector. Intrinsic spectra between 1,800 and 3,000 keV derived from internal radioactivity within LaBr₃(Ce) scintillators have been investigated in some literatures, and these results are confirmed by the experiments in this work. In this paper, a new method for LaBr₃(Ce) detector energy calibration from 100 to 2,000 keV is proposed using the intrinsic spectra (self-calibration) instead of the standard gamma sources. Proof-of-concept experiment results show that self-calibration can guarantee energy accuracy of better than 0.815 % and can be applied outside the laboratory. The stability and applicability of this method are also investigated systematically.     

硫代多联吡啶铂(Ⅱ)配合物的合成、性质及在光催化制氢中的应用

合成了2个新配体4-(4-硫代乙酸)甲苯基-6-苯基-2,2’-联吡啶HC^N^N(PhCH2SCOCH3)(L3)和6-(4-硫代乙酸)甲苯基-2,2’-联吡啶HC^N^N(CH2SCOCH3)(L5)及其发光的铂(Ⅱ)配合物ClPtC^N^N(PhCH2SCOCH3)(C3)和ClPtC^N^N(CH2SCOCH3)(C5).通过1H NMR谱和质谱对它们的结构进行了表征,采用X射线单晶衍射分析确定了C3的晶体结构.利用紫外-可见吸收光谱、发射光谱及激发态寿命测定研究了它们的光物理性质和电化学性质,以及配合物作为光敏剂在光催化制氢中的应用.通过系列配合物产氢效率的比较,揭示了它们的产氢效率和激发态寿命的关系.     

囊泡状二氧化硅的合成及油气吸附性能

以正硅酸四甲酯(TMOS)为硅源,P123(EO20PO70EO20)为表面活性剂,在p H=6的磷酸缓冲体系中制备了囊泡状二氧化硅材料.利用乙醇萃取脱除模板剂P123,电镜观测结果表明所得二氧化硅具有大孔囊泡结构,N2吸附结果表明其具有高比表面积和大孔容.通过Boehm滴定法确定了硅羟基数量与吸水率呈正相关.用囊泡状二氧化硅材料与商业化活性炭(AC)和硅胶(SG)对水蒸气、正己烷和油气进行静态吸附.在自建的动态正己烷吸附装置上用对囊泡状二氧化硅材料和商业化AC和SG对正己烷进行动态吸附.吸附结果表明,囊泡状二氧化硅材料的静/动态吸附容量和稳定性都远高于商业化活性炭和硅胶.     

基于表面等离子体子共振成像技术研究苏拉明和顺铂对肝癌细胞生长的抑制作用简

基于表面等离子体子共振成像(SPRi)技术提出了一种实时、非标记的新型抗癌药物药效评估方法. 以聚二甲基硅氧烷(PDMS)为材料,制作了包含微柱结构的微流控芯片作为流通反应池,配合自行设计组装的SPRi生物传感器完成肿瘤细胞的特异性捕获及检测,研究了苏拉明和顺铂对肝癌细胞HepG2的生长抑制作用. 同时引入辅助验证实验,即采用常规八肽胆囊收缩素(简称CCK-8)法测定上述药物对肝癌细胞增殖的抑制作用. SPRi检测结果表明,苏拉明和顺铂能抑制肿瘤细胞HepG2增殖并呈现剂量、时间依赖关系.     

增压O_2/CO_2气氛下煤燃烧特性实验研究

增压O2/CO2燃烧是一种可高效分离回收CO2的新兴燃烧技术,其燃烧机理与常压空气、常压O2/CO2燃烧存在较大差异。在加压热重分析仪上研究了增压条件下总压、氧浓度、气氛及粒径等反应参数对美国烟煤和淮北无烟煤燃烧特性的影响,确定了煤的着火温度,并对其进行燃烧动力学分析。结果表明,增压O2/CO2气氛下,随着压力或氧浓度的增加,DTG曲线向低温区移动,煤样整体燃烧速率加快。压力提升、氧浓度增加及煤粉细化均可改善O2/CO2气氛下煤样的着火特性。常压O2/CO2气氛下煤粉燃烧基本属于一级反应;增压O2/CO2气氛下,低温区属于0.5级反应,而高温区属于1.5级反应。     

Computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous determination of six carbamate pesticides from environmental water

The computer‐assisted design and synthesis of molecularly imprinted polymers for the simultaneous capture of six carbamate pesticides from environmental water are reported in this work. The quantum mechanical computational approach was employed to design the molecularly imprinted polymers with carbofuran as template. The interaction energies between the template molecule and different functional monomers in various solvents were calculated to assist in the selection of the functional monomer and porogen. The optimised molecularly imprinted polymer was subsequently used as a class‐selective sorbent in solid‐phase extraction for pre‐concentration and determination of carbamates from environmental water. The parameters influencing the extraction efficiency of the molecularly imprinted solid‐phase extraction procedure were systematically investigated to facilitate the class‐selective extraction. For the proposed method, linearity was observed over the range of 2–500 ng/mL with the correlation coefficient ranging from 0.9760 to 1.000. The limits of detection ranged from 0.2 to 1.2 ng/mL, and the limit of quantification was 4 ng/mL. These results confirm that computer‐assisted design is an effective evaluation tool for molecularly imprinted polymers synthesis, and that molecularly imprinted solid‐phase extraction can be applied to the simultaneous analysis of carbamates in environmental water.