A BiCMOS dynamic carry lookahead adder circuit for VLSIimplementation of high-speed arithmetic unit

A BiCMOS dynamic carry lookahead circuit that is free from race problems is presented. A 16 b full-adder test circuit, which has been designed based on a 2 μm BiCMOS technology, shows a more than five times improvement in speed as compared to the CMOS Manchester carry lookahead (MCLA) circuit. The speed advantage of the BiCMOS dynamic carry lookahead circuit is even greater in a 32- or 64-b adder     

Wideband HEMT MMIC low-noise amplifier with temperaturecompensation

A wideband low-noise pseudomorphic HEMT MMIC variable-gain amplifier has been designed and fabricated. The amplifier has a nominal gain of 13 dB across the band 2-20 GHz, with gain flatness better than ±0.4 dB. The noise figure is less than 3 dB across the band 6-16 GHz. An on-chip temperature-sensing diode is used to provide a linear temperature correction which has been used to reduce the gain variation of the amplifier by a factor of 2 across the temperature range -50°C to +95°C     

Performance of asynchronous DS-CDMA system with long and shortspreading codes

The effect of spreading code length on the BER performance of an asynchronous DS-CDMA system is studied by means of Monte Carlo simulation. The probability of the crosscorrelation value between segments of long sequences is also discussed. Results indicate that the system performance with very long codes is ~1 dB worse compared to that of short CDMA codes     

Globally convergent edge-preserving regularized reconstruction: anapplication to limited-angle tomography

We introduce a generalization of a deterministic relaxation algorithm for edge-preserving regularization in linear inverse problems. This algorithm transforms the original (possibly nonconvex) optimization problem into a sequence of quadratic optimization problems, and has been shown to converge under certain conditions when the original cost functional being minimized is strictly convex. We prove that our more general algorithm is globally convergent (i.e., converges to a local minimum from any initialization) under less restrictive conditions, even when the original cost functional is nonconvex. We apply this algorithm to tomographic reconstruction from limited-angle data by formulating the problem as one of regularized least-squares optimization. The results demonstrate that the constraint of piecewise smoothness, applied through the use of edge-preserving regularization, can provide excellent limited-angle tomographic reconstructions. Two edge-preserving regularizers-one convex, the other nonconvex-are used in numerous simulations to demonstrate the effectiveness of the algorithm under various limited-angle scenarios, and to explore how factors, such as the choice of error norm, angular sampling rate and amount of noise, affect the reconstruction quality and algorithm performance. These simulation results show that for this application, the nonconvex regularizer produces consistently superior results.     

Noise contribution of the body resistance in partially-depleted SOIMOSFETs

An additional noise component is observed in the noise spectrum of transistors in a partially-depleted (PD) medium-thickness SOI-CMOS technology. We identify the origin of this additional noise in the noisy resistance of the body film. This resistance, coupled to the gate capacitance, forms an RC filter and generates the hump-shape of the additional noise component. Several experimental observations that support this model are presented     

Systolic array implementation of block LMS algorithm

The authors derive the systolic array implementation of the block LMS algorithm, consisting of N processing elements, where N is the filter order. The resulting array attains an order-independent sampling rate. Computer simulation results show that the block LMS algorithm is faster than the delayed LMS algorithm, which has previously been implemented on systolic arrays     

Analysis of course errors on CVOR antennas (including effects ofmutual coupling between elements)

A VHF omnidirectional radio range (VOR) is a navigation aid radio beacon facility, which provides aircraft with azimuth information relative to the VOR station in question as the origin. In Japan, two types of VOR-the conventional type (referred to as a CVOR) and the Doppler type (referred to as a DVOR)-are currently in use. An element known as the Alford loop antenna (ALA), which changes the loading reactance, is used for the VOR because the horizontally polarized wave and nondirectivity in the horizontal plane are preferred. A VOR antenna consists of a carrier antenna and a sideband antenna-an aircraft receives separate signals from these two antennas and compares them to obtain azimuth information. The mutual coupling between the elements forming the carrier and the sideband antenna affects the directivity of the single elements, resulting in errors in azimuth information. With the mutual coupling between the antenna elements being taken into consideration, a quantitative calculation was made by using the moment method-the results of the calculation made it clear that a loading reactance value of -320 Ω is better to make not mutually coupled elements nondirectional while a loading reactance value of -600 Ω is optimum to minimize the azimuth error of a CVOR     

Three-dimensional reconstruction of live embryos using roboticmacroscope images

To determine the three-dimensional (3-D) shape of a live embryo is a technically challenging task. The authors show that reconstructions of live embryos can be done by collecting images from different viewing angles using a robotic macroscope, establishing point correspondences between these views by block matching, and using a new 3-D reconstruction algorithm that accommodates camera positioning errors. The algorithm assumes that the images are orthographic projections of the object and that the camera scaling factors are known. Point positions and camera errors are found simultaneously. Reconstructions of test objects and embryos show that meaningful reconstructions are possible only when camera positioning and alignment errors are accommodated since these errors can be substantial. Reconstructions of early-stage axolotl embryos were made from sets of 33 images. In a typical reconstruction, 781 points, each visible in at least three different views, were used to form 1511 triangles to represent the embryo surface. The resulting reconstruction had a mean radius of error of 0.27 pixels (1.1 μm). Mathematical properties of the reconstruction algorithm are identified and discussed     

Structural properties and electrical behaviour of thin silicon oxynitride layers

Thin SiO₂ and SiO_xN_y layers were grown on silicon using Rapid Thermal Processing (RTP) in either O₂ or N₂O ambient. Subsequent annealing or nitridation was performed in order to improve the electrical stability. The composition of the films, in particular the incorporation of nitrogen and hydrogen, has been studied. We obtained the distribution of states at the Si/insulator interface through the evaluation of CV measurements and investigated the charge trapping in the layers analysing the voltage–time behaviour during Fowler–Nordheim constant current injection. Furthermore, assuming a trap assisted tunneling mechanism, the influence of near interface trap states on the current voltage characteristic was used to derive an effective insulator state distribution.