Metallocene copolymers of propene and 1‐hexene: The influence of the comonomer content and thermal history on the structure and mechanical properties

The relationships between the structure and properties have been established for copolymers of propylene and 1‐hexene synthesized with an isotactic metallocene catalyst system. The most important factor affecting the structure and properties of these copolymers is the comonomer content. The thermal treatment, that is, the rate of cooling from the melt, is also important. These factors affect the thermal properties, the degree of crystallinity, and therefore the structural parameters and the viscoelastic behavior. A slow cooling from the melt favors the formation of the γ phase instead of the α modification. Regarding the viscoelastic behavior, the β relaxation, associated with the glass‐transition temperature, is shifted to lower temperatures and its intensity is increased as the 1‐hexene content raises. The microhardness values are correlated with those of the storage modulus deduced from dynamic mechanical thermal analysis curves, and good linear relations have been obtained between these parameters. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1253–1267, 2006     

Proton–proton bremsstrahlung towards the elastic limit at 190 MeV incident beam energy

A series of nucleon–nucleon bremsstrahlung (NNγ) experiments at 190 MeV incident beam energy have been performed at KVI in order to gain more insight into the dynamics governing the bremsstrahlung reaction. After initial measurements wherein the bremsstrahlung process was studied far away from the elastic limit, a new study was used to probe the process nearer to the elastic limit by measuring at lower photon energies. Measured cross sections and analyzing powers are compared with the predictions of a microscopic model and those of two soft-photon models. The theoretical calculations overestimate the data by up to ≈30%, for some kinematics.     

Learning With Weblogs: Enhancing Cognitive and Social Knowledge Construction

This study investigated the impact of weblog use on individual learning in the context of university senior-level business education. As an emergent form of personal communication, weblogs enable people to publish their thoughts as webpages, and to share information and knowledge. Recognizing the potential impact of weblogs on knowledge expression and sharing, this research sought to empirically examine whether the continuous use of weblogs as online learning logs would affect student learning performance. The assumption was that effective use of weblogs promoted the constructivist models of learning by supporting both cognitive and social knowledge construction, and by reinforcing individual accountability in learning. Results from an Information Systems undergraduate course with 31 participants indicated that the performance of students' weblogs was a significant predictor of the learning outcome (while traditional coursework was not). Moreover, individuals' cognitive construction effort to build their own mental models and social construction effort to further enrich/expand knowledge resources appeared to be two key aspects of the constructivist learning with weblogs. Our results imply the potential benefit of using weblogs as a knowledge construction tool and a social learning medium     

Structural and electrical characterization of SxSe100−x thin films

Thin films of samples of the glassy S_xSe_100−x system with 0 ≤ x ≤ 7.28 have been prepared by thermal evaporation technique at room temperature (300 K). X-ray investigations show that the structure of pure selenium (Se) does change seriously by the addition of small amount of sulphur S ≤7.28%. The lattice parameters were determined as a function of sulphur content. Results of differential thermal analysis (DTA) of the glassy compositions of the system S_xSe_100−x were discussed. The characteristic temperatures (T_g, T_c and T_m) were evaluated. Dark electrical resistivities, ρ, of S_xSe_100−x thin films with different thicknesses from 100 to 500 nm, were measured in the temperature range from 300 to 423 K. Two distinct linear parts with different activation energies were observed. The variation of electrical resistivity of examined compositions has been discussed as a function of the film thickness, temperature and the sulphur content. The application of Mott model for the phonon assisted hopping of small polarons gave the same two activation energies obtained from the resistivity temperature calculations.     

Energy level alignment between C60 and Al using ultraviolet photoelectron spectroscopy

The energy level alignment between C₆₀ and Al has been investigated by using ultraviolet photoelectron spectroscopy. To obtain the interfacial electronic structure between C₆₀ and Al, C₆₀ was deposited on a clean Al substrate in a stepwise manner. The valence-band spectra were measured immediately after each step of C₆₀ deposition without breaking the vacuum. The measured onset of the highest occupied molecular orbital energy level was located at 1.59 eV from the Fermi level of Al. The vacuum level was shifted 0.68 eV toward lower binding energy with additional C₆₀ layers. The observed vacuum level shift means that the interface dipole exists at the interface between C₆₀ and Al. The barrier height of electron injection from Al to C₆₀ is 0.11 eV, which is smaller value than that of hole injection.     

Calibration of imaging laser-induced fluorescence measurements in highly absorbing flames

It has been described earlier that imaging measurements of laser-induced fluorescence (LIF) in flames can be calibrated to number densities with an integrated absorption measurement provided the integrated absorption is small. In this paper a method is presented that extends the technique to flames with substantial absorption, improves the number density determination and allows the experimental parameters to be chosen more freely. The method is based on an iterative computer procedure that reconstructs the 1-D spatially resolved absorption profile from laser measurements of the 1-D spatially resolved LIF and the integrated absorption of the laser beam. The technique is experimentally demonstrated by measurements of OH number densities in atmospheric flames. It is potentially a single-pulse method. Other applications of the iterative procedure are mentioned.     

Time-resolved chirp evaluations of Gbit/s NRZ and gain-switched DFB laser pulses using narrowband Fabry-Perot spectrometer

A compact, easy-to-use, low-cost spectrometer for solving the chirped spectrum of DFB lasers is demonstrated using narrowband Fabry-Perot etalons with resolutions comparable to grating spectrometers. Time-resolved chirp measurements of Gbit/s NRZ and gain-switched DFB laser pulses are presented.<>     

MR imaging of teeth using a silent single point imaging technique

Magnetic resonance imaging (MRI) of teeth is an emerging application area which is still in development. Previous investigations did not fully focus on potential in vivo applications. Using ¹H and ³¹P MRI, we obtained ex vivo microimages of teeth with a silent single point imaging (SPI) technique. ¹H Images with an in-plane resolution of 310×310 μm² were obtained. Utilizing sine-shaped gradient ramps significantly reduced the sound pressure level of the experiment to that of background noise. ¹H magnetic resonance spectroscopy (MRS) was used to characterize the major components in the observed resonance. The spin–spin (T₂) relaxation times of water in enamel and dentin differed by at least one order of magnitude. Three-dimensional surface reconstruction of the data allowed for complete visualization of the tooth’s surface while volume reconstruction displayed the internal geometry. PACS 82.56.Na; 83.85.Fg; 87.61.-c; 87.19.-j; 43.50.Cb