Serially concatenated space-time codes with iterative decoding and performance limits of block-fading channels

This work considers space-time channel coding for systems with multiple-transmit and a single-receive antenna, over space uncorrelated block-fading (quasi-static) channels. Analysis of the outage probability over such channels reveals the existence of a threshold phenomenon. The outage probability can be made arbitrary small by increasing the number of transmit antennas, only if the E/sub b//N/sub 0/ is above a threshold which depends on the coding rate. Furthermore, it is shown that when the number of transmit antennas is increased, the /spl epsi/-capacity of a block-fading Rayleigh channel tends to the Shannon capacity of an additive white Gaussian noise channel. This paper also presents space-time codes constructed as a serial concatenation of component convolutional codes separated by an interleaver. These schemes provide full transmit diversity and are suitable for iterative decoding. The rate of these schemes is less than 1 bit/s/Hz, but can be made arbitrary close to 1 bit/s/Hz by the use of Wyner-Ash codes as outer components. Comparison of these schemes with structures from literature shows that performance gains can be obtained at the expense of a small decrease in rate. Computer simulation results over block-fading Rayleigh channels show that the frame-error rate of several of these schemes is within 2-3 dB from the theoretical outage probability.     

A CMOS multichannel 10-Gb/s transceiver

We describe a CMOS multichannel transceiver that transmits and receives 10 Gb/s per channel over balanced copper media. The transceiver consists of two identical 10-Gb/s modules. Each module operates off a single 1.2-V supply and has a single 5-GHz phase-locked loop to supply a reference clock to two transmitter (Tx) channels and two receiver (Rx) channels. To track the input-signal phase, the Rx channel has a clock recovery unit (CRU), which uses a phase-interpolator-based timing generator and digital loop filter. The CRU can adjust the recovered clock phase with a resolution of 1.56 ps. Two sets of two-channel transceiver units were fabricated in 0.11-/spl mu/m CMOS on a single test chip. The transceiver unit size was 1.6 mm /spl times/ 2.6 mm. The Rx sensitivity was 120-mVp-p differential with a 70-ps phase margin for a common-mode voltage ranging from 0.6 to 1.0 V. The evaluated jitter tolerance curve met the OC-192 specification.     

High-performance self-aligned SiGeC HBT with selectively grown Si/sub 1-x-y/Ge/sub x/C/sub y/ base by UHV/CVD

Si/sub 1-x-y/Ge/sub x/C/sub y/ selective epitaxial growth (SEG) was performed by cold-wall, ultrahigh-vacuum chemical vapor deposition, and the effects of incorporating C on the crystallinity of Si/sub 1-x-y/Ge/sub x/C/sub y/ layers and the performance of a self-aligned SiGeC heterojunction bipolar transistor (HBT) were evaluated. A Si/sub 1-x-y/Ge/sub x/C/sub y/ layer with good crystallinity was obtained by optimizing the growth conditions. Device performance was significantly improved by incorporating C, as a result of applying Si/sub 1-x-y/Ge/sub x/C/sub y/ SEG to form the base of a self-aligned HBT. Fluctuations in device performance were suppressed by alleviating the lattice strain. Furthermore, since the B out diffusion could be suppressed by incorporating C, the cutoff frequency was able to be increased with almost the same base resistance. A maximum oscillation frequency of 174 GHz and an emitter coupled logic gate-delay time of 5.65 ps were obtained at a C content of 0.4%, which shows promise for future ultrahigh-speed communication systems.     

On the one-wayness against chosen-plaintext attacks of the Loidreau's modified McEliece PKC

McEliece public-key cryptosystem (PKC) is one of a few alternatives for the current PKCs that are mostly based on either the integer factoring problem (IFP) or the discrete logarithm problem (DLP) that would be solved in polynomial time after the emergence of quantum computers. The security of the McEliece PKC is based on the decoding problem and it is known that it satisfies, with an appropriate conversion, the strongest security notion, i.e., INDistinguishability of encryption against adaptively Chosen-Ciphertext Attacks (IND-CCA2), in the random oracle model under the assumption that the underlying primitive McEliece PKC satisfies a weak security notion of One-Wayness against Chosen-Plaintext Attacks (OW-CPA). OW-CPA is said to be satisfied if it is infeasible for chosen plaintext attacks to recover the whole plaintext of an arbitrarily given ciphertext. Currently, the primitive McEliece PKC satisfies OW-CPA if a parameter n/spl ges/2048 with optimum t and k is chosen since the binary work factor for (n,k,t)=(2048,1278,70) to break it with the best CPA is around 2/sup 106/, which is infeasible even if world-wide computational power is used. While the binary work factor for the next smaller parameter n=1024 is in a gray level of 2/sup 62/, it will be improved by applying Loidreau's modification that employs Frobenius automorphism in Goppa codes. In this paper, we carefully investigate the one-wayness of the Loidreau's modified McEliece PKC against ever known CPAs and new CPAs we propose, and then show that it certainly improves the one-wayness against ever known CPAs but it is vulnerable against our new CPAs. Thus, it is rather harmful to apply the new modification to the McEliece PKC.     

InGaN microring light-emitting diodes

The fabrication and performance of an InGaN light-emitting diode (LED) array based on a microring device geometry is reported. This design has been adopted in order to increase the surface area for light extraction and to minimize losses due to internal reflections and reabsorption. Electrical characteristics of these devices are similar to those of a conventional large-area LED, while the directed light extraction proves to be superior. In fact, these devices are found to be more efficient when operated at higher currents. This may be attributed to improved heat sinking due to the large surface area to volume ratio. The potential applications of these devices are also discussed.     

A resource allocation strategy for distributed MIMO multi-hop communication systems

An extended form of multi-hop communication systems is introduced which allows the application of multiple-input-multiple-output (MIMO) capacity enhancement techniques over spatially separated relaying mobile terminals to drastically increase end-to-end capacity. An explicit resource allocation strategy is deduced in terms of fractional bandwidth and power allocations to each relaying hop over ergodic Rayleigh flat fading channels employing orthogonal frequency-division multiple-access (FDMA)-based relaying.     

Information outage probability of distributed STBCs over Nakagami fading channels

Space-time block codes (STBCs) allow utilising the diversity provided by multiple-input-multiple-output (MIMO) communication channels, thereby decreasing the outage probability for a given communication rate. The contribution of this letter is the derivation of a closed-form expression of the outage probability of distributed STBCs deployed over Nakagami flat fading channels with different channel gains and fading parameters.     

不同注F剂量与CMOS运放电路辐照损伤的相关性

在不同注F剂量条件下,对P沟和N沟两种不同差分对输入CMOS运放电路的电离辐照响应进行了研究.分析比较了注F和未注F运放电路电离辐照响应之间的差异.结果表明,在栅场介质注入适量的F,可有效抑制辐照感生的氧化物电荷尤其是界面态的增长,从而提高CMOS运放电路的抗辐照特性.     

On the capacities of bipartite Hamiltonians and unitary gates

We consider interactions as bidirectional channels. We investigate the capacities for interaction Hamiltonians and nonlocal unitary gates to generate entanglement and transmit classical information. We give analytic expressions for the entanglement generating capacity and entanglement-assisted one-way classical communication capacity of interactions, and show that these quantities are additive, so that the asymptotic capacities equal the corresponding 1-shot capacities. We give general bounds on other capacities, discuss some examples, and conclude with some open questions.     

End‐Capping as a Method for Improving Carrier Injection in Electrophosphorescent Light‐Emitting Diodes

The electronic properties, carrier injection, and transport into poly(9,9‐dioctylfluorene) (PFO), PFO end‐capped with hole‐transporting moieties (HTM), PFO–HTM, and PFO end‐capped with electron‐transporting moieties (ETM), PFO–ETM, were investigated. The data demonstrate that charge injection and transport can be tuned by end‐capping with HTM and ETM, without significantly altering the electronic properties of the conjugated backbone. End‐capping with ETM resulted in more closely balanced charge injection and transport. Single‐layer electrophosphorescent light‐emitting diodes (LEDs), fabricated from PFO, PFO–HTM and PFO–ETM as hosts and tris[2,5‐bis‐2′‐(9′,9′‐dihexylfluorene)pyridine‐κ²NC_3′]iridium(III ), Ir(HFP)₃ as the guest, emitted red light with brightnesses of 2040 cd m^–2, 1940 cd m^–2 and 2490 cd m^–2 at 290 mA cm^–2 (16 V) and with luminance efficiencies of 1.4 cd A^–1, 1.4 cd A^–1 and 1.8 cd A^–1 at 4.5 mA cm^–2 for PFO, PFO–HTM, and PFO–ETM, respectively.