Low-power digital filtering using approximate processing

We present an algorithmic approach to the design of low-power frequency-selective digital filters based on the concepts of adaptive filtering and approximate processing. The proposed approach uses a feedback mechanism in conjunction with well-known implementation structures for finite impulse response (FIR) and infinite impulse response (IIR) digital filters. Our algorithm is designed to reduce the total switched capacitance by dynamically varying the filter order based on signal statistics. A factor of 10 reduction in power consumption over fixed-order filters is demonstrated for the filtering of speech signals     

Removal of power line interference in signal-averagedelectrocardiography systems

A method for line interference reduction to be used in signal-averaged electrocardiography (SAECG) systems is proposed and its performance is analyzed. This new method is an adaptation of a previously reported technique for removal of line interference from conventional electrocardiograms. It involves the recording of a line reference signal simultaneous with the lead signals, so that a shifted and sealed version of it can be used to subtract line interference from the leads. It is shown that this line interference subtraction method can reduce line interference effectively and without introducing any additional noise into the ECG signal. It is also shown that Late Potential diagnostic decisions are not altered when this filter is applied. It is recommended that this technique be used in SAECG when line interference is unavoidable     

Improving the quality of shortwave broadcast reception indoors byusing an anti-fading probe antenna

When shortwave (SW) broadcasts are received on self-contained receivers indoors, there generally is a reduction in signal strength and an increase in the speed and depth of fading in comparison with reception in open spaces outdoors. Even when the received signal level is adequate, the quality of reception indoors is degraded. This comes about because the fields indoors are a superposition of components of radiated signal from the distant transmitter plus other components representing energy reradiated or scattered by nearby conductors such as house wiring or plumbing. Since many of the near-field components originate very close to the receiver, it is possible to reduce their effect by deriving the receiver input from two or more probes-i.e., pickup devices specially designed to respond to fields in their immediate vicinity without disturbing those fields. To achieve the desired probe action, advantage can be taken of the high input impedance of portable, battery-powered receivers designed for use with small telescoping whip antennas. Spacing of multiple probes in the order of a few tens of centimeters suffices to give an output significantly smoother and of higher quality than that obtainable with the receiver's whip antenna by itself. The high signal levels of many SW broadcasts make it practical to use small, inefficient antennas. This article describes an Anti-Fading Probe Antenna (APA), which produces a worthwhile improvement in reception quality indoors. It is simple to build, requires no adjustment, and may even improve received signal quality in some outdoor situations     

The first resonance of a grounded human being exposed to electricfields

Gandhi et al. (1986) have described the results of measurements of the current induced in a human being exposed to electric fields at frequencies between 0 and 50 MHz. For far-field exposure over a ground plane, a resonance in the induced current was observed at 40 MHz; the corresponding current was 12.5 mA/(V/m) for a 1.75-m-tall human being. Increased energy absorption associated with this resonance was predicted by Korniewicz in 1974. At that time calculations were carried out for a cylindrical model of the human body with its external inductance and capacitance and its internal resistance and capacitance. In this paper the resonance frequency and current are described for the same model but with an improved electrical equivalent circuit that includes the radiation resistance of the cylinder. Resonance conditions calculated for this model, 40.40 MHz, 129 mA/(V/m), are in excellent agreement with the measurements reported by Gandhi et al     

Si/SiGe epitaxial-base transistors. I. Materials, physics, andcircuits

A detailed review of SiGe epitaxial base technology is presented, which chronicles the progression of research from materials deposition through device and integration demonstrations, culminating in the first SiGe integrated circuit application. In part I of this paper, the requirements and processes for high-quality SiGe film preparation are discussed, with emphasis on fundamental principles. A detailed overview of SiGe HBT device design and implications for circuit applications is then presented     

Impact of finite laser linewidth on the performance of OFDMnetworks employing single-cavity Fabry-Perot demultiplexers

In this paper we investigate the impact of finite laser linewidths (i.e. source partial coherence) on the crosstalk performance of optical frequency division multiplexing (OFDM) networks employing single-cavity Fabry-Perot demultiplexers. Results are presented that show the important limitation imposed by the finite laser linewidths on the attainable bit error rate (BER), maximum number of users, and the required power penalties to overcome this impairment     

Mine operating accurate stability control with optical fibersensing and Bragg grating technology: the European BRITE/EURAM STABILOSproject

Recent developments of stability control in mines, essentially based on Ge-doped fiber Bragg gratings (FBG) are reported including results about the different aspects of the system: accurate characterizations of FBG, sensor network topology and multiplexing method, user interface design and sensor packaging     

An 80-Msample/s video switched-capacitor filter using a parallelbiquadratic structure

This paper describes a fifth-order, low-pass switched capacitor filter for video applications. It has a 4-MHz cutoff frequency and uses a parallel biquadratic structure with double sampling to achieve an 80-MHz input sampling rate in a 2-μm CMOS process. The prototype filter is fully differential, occupies an active area of 11 mm² , and dissipates 190 mW     

Effects of laser phase drift on coherent optical CDMA

Code division multiple access (CDMA) has been proposed for use in fiber high speed point-to-point systems. Previous research into CDMA has centered on completely coherent detection, that is, when the phases of all users in the system are known or tracked. While coherent detection is a reasonable assumption in many radio frequency systems, semiconductor lasers suffer from serious phase variation that makes tracking of all phases difficult to accomplish. This paper examines the effects of phase drift on several multiuser detectors for binary phase shift keying (BPSK), as well as two detectors for binary frequency shift keying (BFSK). It is shown that when the desired user's phase can be tracked, BPSK match filtering offers better bit error rates than BFSK, and closed form solutions for the asymptotic error probabilities are derived. When there is no phase tracking, it is shown that the probability of error of the multiuser detectors approaches one half. The analysis is based on a proof of the asymptotic normality of the interference caused by even a single undesired user. All asymptotic results are for infinitely long spreading codes that can be modeled as a random sequence of plus and minus ones. Whether or not the desired user's phase is tracked, all receivers examined suffer from the near-far problem     

Continuously chirped DFB gratings by specially bent waveguides fortunable lasers

We have implemented and studied a new type of tunable multiple-section semiconductor distributed feedback (DFB) laser using tailored chirped DFB gratings. Arbitrarily and continuously chirped DFB gratings are defined by bent waveguides on homogeneous grating fields with ultrahigh spatial precision. The mathematical bending functions are optimized in this case to provide enlarged wavelength tuning ranges. We present the results of model calculations, the technological device realization and experimental results of the DFB laser characterization e.g. a tuning range of 5.5 nm without wavelength gaps and high side mode suppression ratio