Enhancement of lateral resolution in confocal self-interference microscopy

We describe confocal self-interference microscopy with enhanced lateral resolution. A uniaxial anisotropic crystal is used to cause interference between two linearly polarized beams that are reflected from the same pointlike object in the focal plane of the objective lens. Theory and the optimal design that maximizes the sensitivity of the interference signal are presented. A numerical experiment shows a 38% decrease in the lateral FWHM for simple confocal self-interference microscopy.     

Image of a straight edge in confocal self-interference microscopy

An image of a straight edge in confocal self-interference microscopy (CSIM) is analyzed. Simulations of edge images based on a two-dimensional imaging equation are presented that show a 103% increase in edge gradient and a 43.1% decrease in the 10-90% width. The first experimental results, to our knowledge, for CSIM are presented and show good agreement with the simulation results and a 23% decrease in the 10-90% width.     

SATS: Structure‐Aware Touch‐Based Scrolling

Non‐linear document navigation refers to the process of repeatedly reading a document at different levels to provide an overview, including selective reading to search for useful information within a document under time constraints. Currently, this function is not supported well by small‐screen tablets. In this study, we propose the concept of structure‐aware touch‐based scrolling (SATS), which allows structural document navigation using region‐dependent touch gestures for non‐sequential navigation within tablets or tablet‐sized e‐book readers. In SATS, the screen is divided into four vertical sections representing the different structural levels of a document, where dragging into the different sections allows navigating from the macro to micro levels. The implementation of a prototype is presented, as well as details of a comparative evaluation using typical non‐sequential navigation tasks performed under time constraints. The results showed that SATS obtained better performance, higher user satisfaction, and a lower usability workload compared with a conventional structural overview interface.     

Highly sensitive signal detection of duplex dye-labelled DNA oligonucleotides in a PDMS microfluidic chip: confocal surface-enhanced Raman spectroscopic study

Rapid and highly sensitive detection of duplex dye-labelled DNA sequences in a PDMS microfluidic channel was investigated using confocal surface enhanced Raman spectroscopy (SERS). This method does not need either an immobilization procedure or a PCR amplification procedure, which are essential for a DNA microarray chip. Furthermore, Raman peaks of each dye-labelled DNA can be easily resolved since they are much narrower than the corresponding broad fluorescence bands. To find the potential applicability of confocal SERS for sensitive bio-detection in a microfluidic channel, the mixture of two different dye-labelled (TAMRA and Cy3) sex determining Y genes, SRY and SPGY1, was adsorbed on silver colloids in the alligator teeth-shaped PDMS microfluidic channel and its SERS signals were measured under flowing conditions. Its major SERS peaks were observable down to the concentration of 10(-11) M. In the present study, we explore the feasibility of confocal SERS for the highly sensitive detection of duplex dye-labelled DNA oligonucleotides in a PDMS microfluidic chip.     

Synthesis and properties of vinyl‐terminated and silicon‐containing polysulfones and polyketones

4‐Fluorophenylsulfonylphenyl‐terminated polysulfone and 4‐fluorobenzoylphenyl ketone were prepared with bisphenol A and an excess of bis‐(4‐fluorophenyl)sulfone or 4,4′‐difluorobenzophenone, respectively, at 160 °C using potassium carbonate in N,N‐dimethylacetamide. The resulting polymers were reacted with 4‐hydroxystyrene to synthesize vinyl‐terminated polysulfones and ketones. The silicon‐containing polysulfones and ketones were prepared from the vinyl‐terminated polymer precursor and various H‐functional silanes or siloxanes. The synthesis of silicon‐containing polymers was achieved by hydrosilation with a rhodium catalyst. It was shown that the hydrosilation reaction proceeds with 55:45 chemoselectivity. The resulting polymers were investigated by ¹H NMR spectroscopy, DSC, and thermogravimetric analysis. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2937–2942, 2001     

Low energy excitations in graphite: The role of dimensionality and lattice defects

In this paper, we present a high resolution angle resolved photoemission spectroscopy (ARPES) study of the electronic properties of graphite. We found that the nature of the low energy excitations in graphite is particularly sensitive to interlayer coupling as well as lattice disorder. As a consequence of the interlayer coupling, we observed for the first time the splitting of the π bands by ≈0.7 eV near the Brillouin zone corner K. At low binding energy, we observed signatures of massless Dirac fermions with linear dispersion (as in the case of graphene), coexisting with quasiparticles characterized by parabolic dispersion and finite effective mass. We also report the first ARPES signatures of electron-phonon interaction in graphite: a kink in the dispersion and a sudden increase in the scattering rate. Moreover, the lattice disorder strongly affects the low energy excitations, giving rise to new localized states near the Fermi level. These results provide new insights on the unusual nature of the electronic and transport properties of graphite.     

Optimal design of high precision XY-scanner with nanometer-level resolution and millimeter-level working range

This article presents the design and performance evaluation of a compact high precision XY-scanner providing nanometer-level resolution and a millimeter-level travel range. The proposed XY-scanner is composed of a voice coil motor (VCM) and double compound linear spring flexure guide mechanism. The challenge was to determine design variables properly while simultaneously satisfying the requirements of high resolution, long working range, high response speed, and compact size, because the relationships between the design variables and the system parameters are complex. Therefore, we developed a design that would provide the optimal tradeoff in terms of design variables. The objective was to maximize the first resonant frequencies of the XY-scanner to increase response speed while limiting the size of the scanner to 100 mm × 100 mm × 50 mm. The XY-scanner was fabricated with optimally-designed values, and its performance was evaluated. From the experimental results, the first resonant frequencies of XY-scanner were 26.68 Hz for the X-axis and 22.79 Hz for the Y-axis. The measured results of the 10 nm resolution and 2 mm working range confirmed that the designed scanner could be successfully used in precision fields requiring nanometer-level resolution and millimeter-level travel range.     

Interface coupling transition in a thin epitaxial antiferromagnetic film interacting with a ferromagnetic substrate

We report experimental evidence for a transition in the interface coupling between an antiferromagnetic film and a ferromagnetic substrate. The transition is observed in a thin epitaxial NiO film grown on top of Fe(001) as the film thickness is increased. Photoemission electron microscopy excited with linearly polarized x rays shows that the NiO film is antiferromagnetic at room temperature with in-plane uniaxial magnetic anisotropy. The anisotropy axis is perpendicular to the Fe substrate magnetization when the NiO thickness is less than about 15 A, but rapidly becomes parallel to the Fe magnetization for a NiO coverage higher than 25 A.     

Strong and complex electron-lattice correlation in optimally doped Bi2Sr2CaCu2O8+delta

We discuss the nature of electron-lattice interaction in optimally doped Bi_{2}Sr_{2}CaCu_{2}O_{8+delta} samples, using the isotope effect (IE) in angle resolved photoemission spectroscopy (ARPES) data. The IE in the ARPES linewidth and the IE in the ARPES dispersion are both quite large, implying a strong electron-lattice correlation. The strength of the electron-lattice interaction is "intermediate," i.e., stronger than the Migdal-Eliashberg regime but weaker than the small polaron regime, requiring a more general picture of the ARPES kink than the commonly used Migdal-Eliashberg picture. The two IEs also imply a complex interaction, due to their strong momentum dependence and their differing sign behaviors. In sum, we propose an intermediate-strength coupling of electrons to localized lattice vibrations via charge density fluctuations.     

Bulk band gaps in divalent hexaborides

Complementary angle-resolved photoemission and bulk-sensitive k-resolved resonant inelastic x-ray scattering of divalent hexaborides reveal a >1 eV X-point gap between the valence and conduction bands, in contradiction to the band overlap assumed in several models of their novel ferromagnetism. This semiconducting gap implies that carriers detected in transport measurements arise from defects, and the measured location of the bulk Fermi level at the bottom of the conduction band implicates boron vacancies as the origin of the excess electrons. The measured band structure and X-point gap in CaB6 additionally provide a stringent test case for many-body quasiparticle band calculations.