SIR-C data quality and calibration results

The SIR-C/X-SAR imaging radar took its first flight on the Space Shuttle Endeavour in April 1994 and flew for a second time in October 1994. This multifrequency radar has fully polarimetric capability at L- and C-band, and a single polarization at X-band (X-SAR). The Endeavour missions were designated the Space Radar Laboratory-1 (SRL-1) and -2 (SRL-2). Calibration of polarimetric L- and C-band data for all the different modes SIR-C offers is an especially complicated problem. The solution involves extensive analysis of pre-flight test data to come up with a model of the system, analysis of in-flight test data to determine the antenna pattern and gains of the system during operation, and analysis of data from over fourteen calibration sites distributed around the SIR-C/X-SAR orbit track. The SRL missions were the first time a multifrequency polarimetric imaging radar employing a phased array antenna has been flown in space. Calibration of SIR-C data products involved some unique technical problems given the complexity of the radar system. In this paper, the approach adopted for calibration of SIR-C data is described and the calibration performance of the data products is presented     

Multiple p-adic L-function

An analytic function interpolating the multiple generalized Bernoulli numbers attached to a primitive Dirichlet character X at negative integers in the complex plane is studied. The multiple p-adic L-function is constructed as the p-adic analog of the above function. Finally, the values of the partial derivative of this multiple p-adic L-function at s = 0 are given. Dedicated to the memory of Boris Moiseevich Levitan     

Hybrid pulse position modulation/ultrashort light pulse code-division multiple-access systems .I. Fundamental analysis

We propose a hybrid pulse position modulation/ultrashort light pulse code-division multiple-access (PPM/ULP-CDMA) system for ultrafast optical communications. The proposed system employs spectral CDMA encoding/decoding and PPM with very short pulse separation. The statistical properties of the encoded ULP are investigated with a general pulse model, and the performance of the proposed PPM/ULP-CDMA system is investigated. It is shown that we can improve upon the performance of other ULP-CDMA systems, such as those using on-off keying, by employing PPM. It is also shown that we can improve the performance of the proposed system by increasing the effective number of chips, by increasing the number of PPM symbols, and by reducing the ULP duration. The performance analysis shows that the aggregate throughput of the proposed PPM/ULP-CDMA system could be over 1 Tb/s.     

Effects of Sc2O3 and MgO passivation layerson the output power of AlGaN/GaN HEMTs

The low temperature (100°C) deposition of Sc₂O₃ or MgO layers is found to significantly increase the output power of AlGaN/GaN HEMTs. At 4 GHz, there was a better than 3 dB increase in output power of 0.5×100 μm² HEMTs for both types of oxide passivation layers. Both Sc₂ O₃ and MgO produced larger output power increases at 4 GHz than conventional plasma-enhanced chemical vapor deposited (PECVD) SiN_x passivation which typically showed ⩽2 dB increase on the same types of devices. The HEMT gain also in general remained linear over a wider input power range with the Sc₂O₃ or MgO passivation. These films appear promising for reducing the effects of surface states on the DC and RF performance of AlGaN/GaN HEMTs     

Numerical methods for computations of nonequilibrium hypersonic flow around bodies

In this paper we present numerical methods for computations of nonequilibrium hypersonic flow of air around bodies including chemical reaction effects and present numerical result of the flow over concave corners. We developed implicit finite difference method to overcome numerical difficulties associated with the lack of resolution behind the shock and near the body. Using our method we were able to find details of the flow properties near the shock and body and were able to continue the computation of the flow for a long distance from the corner of the body.     

Long-wavelength GaInNAs(Sb) lasers on GaAs

The boom in fiber-optic communications has caused a high demand for GaAs-based lasers in the 1.3-1.6-μm range. This has led to the introduction of small amounts of nitrogen into InGaAs to reduce the bandgap sufficiently, resulting in a new material that is lattice matched to GaAs. More recently, the addition of Sb has allowed further reduction of the bandgap, leading to the first demonstration of 1.5-μm GaAs-based lasers by the authors. Additional work has focused on the use of GaAs, GaNAs, and now GaNAsSb barriers as cladding for GaInNAsSb quantum wells. We present the results of photoluminescence, as well as in-plane lasers studies, made with these combinations of materials. With GaNAs or GaNAsSb barriers, the blue shift due to post-growth annealing is suppressed, and longer wavelength laser emission is achieved. Long wavelength luminescence out to 1.6 μm from GaInNAsSb quantum wells, with GaNAsSb barriers, was observed. In-plane lasers from these samples yielded lasers operating out to 1.49 μm, a minimum threshold current density of 500 A/cm² per quantum well, a maximum differential quantum efficiency of 75%, and pulsed power up to 350 mW at room temperature     

Rate-driven key frame selection using temporal variation of visualcontent

A simple and fast method to select the assigned number of key frames in a video shot is presented. The algorithm selects the key frames so that the temporal variation of visual content within a video shot is equally distributed to each key frame. Simulation results on a real video sequence are shown to be in agreement with the human visual perception     

In situ transmission electron microscopy study of the nucleation and grain growth of Ge2Sb2Te5 thin films

The nucleation and grain growth of the Ge₂Sb₂Te₅ (GST) thin films were studied using high voltage electron microscope operated at 1250 kV. As a result, we have found that 2 nm-sized nucleus forms as a cluster which atoms are arranged regularly at the stage of nucleation prior to the formation of grains having crystal structure. The high-resolution transmission electron microscopy study and fast-Fourier transformations revealed that coexistence of face-centered-cubic (FCC) and hexagonal structure occurs, and formation of twin defect is found in the hexagonal structure during the grain growth as the annealing temperature is increased. GST grain having the hexagonal structure grow from the surface, and the growth proceeded perpendicular to the [0 0 0 1], namely the path parallel to the (0 0 0 1) plane. Consequently, grain growth to a large-scale result in a lengthened shape.     

The Two-Point Codes with the Designed Distance on a Hermitian Curve in Even Characteristic

In Homma M and Kim SJ [2], the authors considered two-point codes on a Hermitian curve defined over fields of odd characteristic. In this paper, we study the geometry of a Hermitian curve over fields of even characteristic and classify the two-point codes whose minimum distances agree with the designed ones.     

Pd (II)‐catalyzed vinyl addition polymerization of novel functionalized norbornene bearing dimethyl carboxylate groups

Three novel functionalized polynorbornenes (PNB) with pendant dimethyl carboxylate group (carboxylates—acetate, propionate, and butyrate) are synthesized as a vinyl‐type with a palladium (II) catalyst in high yield. The effects of size of substitutents, molar ratio of monomer to catalyst, solvent polarity, reaction time, and temperature on the polymerization of exo‐norbornene dimethyl propionate were systematically investigated. The low molar ratio and temperature, as well as high polarity of solvent, and long reaction time, are favorable for the enhancement of the monomer conversion, especially, the solvent have an obvious effect on the catalyst activity. The resulting poly(cis‐norbornene‐exo‐2,3‐dimethyl carboxylates) (PNB‐dimethyl carboxylates) show good solubility in common organic solvent and high thermal stability up to 360 °C. The glass transition temperature was detected by DMA at 331, 324, and 318 °C for acetate, propionate, and butyrate, respectively. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3391–3399, 2007