Taking the challenge of multiple access for third-generationcellular mobile radio systems-a European view

In Europe, the challenge of the design of third-generation cellular mobile radio systems has been taken numerous research and development activities in this field have been started. The authors try to give an overview of the European activities in this field. The article is organized in two parts. In the first part, the requirements for third-generation cellular mobile radio systems such as Universal Mobile Telecommunications System (UMTS) and Future Public Land Mobile Telecommunications System (FPLMTS), which has been named International Mobile Telecommunications after the year 2000 (IMT-2000) are presented concisely. Also, the importance and challenge of the multiple access design for such third-generation cellular mobile radio systems is explained. In the second part, numerous European research activities with focus on the multiple access design for third-generation cellular mobile radio systems are reviewed     

Proton relaxation times in human red bone marrow by volume selective magnetic resonance spectroscopy

In hematological diseases the composition of red bone marrow shows alterations. The relaxation timesT ₁ andT ₂ of water and lipids in human hemopoietic bone marrow of 14 normal volunteers and 10 patients with acute leukemia and bone marrow carcinosis are determined using a double spin echo spectroscopy sequencein vivo. The volumes of interest (VOI) of (13 mm)³ in the center of vertebral bodies are examined using different measurement parameters. ForT ₁ measurements an inversion-recovery method is used.T ₂ is evaluated from spectra with differentTE. T ₁ (water) is found in a range between 1000 and 1700 ms,T ₁ (lipids) in a range between 260 and 320 ms in healthy volunteers.T ₂ (water) is determined between 32 and 65 ms. In some cases phase distortions of the water signals occur in the spectra. Water flow within the VOI may be a possible reason.T ₂ (lipids) is evaluated between 73 and 91 ms. The patients with acute leukemia exhibit clearly reduced lipid signals in their spectra. Lipid relaxation times could not be determined in these cases.T ₂ (water) is prolonged in acute leukemia to 51–98 ms.T ₁ (water) was not significantly different from values of healthy volunteers in our measurements. Results are discussed in comparison to relaxometric data from imaging and STEAM spectroscopic methods of other authors.     

Regioselective construction of polysubstituted benzene ring from Baylis-Hillman adduct via [4+2] annulation strategy

A new and regioselective [4+2] benzannulation protocol toward polysubstituted benzenes was developed. Nitroalkane derivative, which was prepared from Baylis-Hillman adduct, served as the four-carbon unit and Michael acceptor as a two-carbon unit.     

A One‐Kilobit PQR‐CMOS Smart Pixel Array

The photonic quantum ring (PQR) laser is a three dimensional whispering gallery (WG) mode laser and has anomalous quantum wire properties, such as microampere to nanoampere range threshold currents and √T‐dependent thermal red shifts. We observed uniform bottom emissions from a 1‐kb smart pixel chip of a 32×32 InGaAs PQR laser array flip‐chip bonded to a 0.35 µm CMOS‐based PQR laser driver. The PQR‐CMOS smart pixel array, now operating at 30 MHz, will be improved to the GHz frequency range through device and circuit optimization.     

Monolithic SiGe Up‐/Down‐Conversion Mixers with Active Baluns

The purpose of this paper is to describe the implementation of monolithically matching circuits, interface circuits, and RF core circuits to the same substrate. We designed and fabricated on‐chip 1 to 6 GHz up‐conversion and 1 to 8 GHz down‐conversion mixers using a 0.8 µm SiGe hetero‐junction bipolar transistor (HBT) process technology. To fabricate a SiGe HBT, we used a reduced pressure chemical vapor deposition (RPCVD) system to grow a base epitaxial layer, and we adopted local oxidation of silicon (LOCOS) isolation to separate the device terminals. An up‐conversion mixer was implemented on‐chip using an intermediate frequency (IF) matching circuit, local oscillator (LO)/radio frequency (RF) wideband matching circuits, LO/IF input balun circuits, and an RF output balun circuit. The measured results of the fabricated up‐conversion mixer show a positive power conversion gain from 1 to 6 GHz and a bandwidth of about 4.5 GHz. Also, the down‐conversion mixer was implemented on‐chip using LO/RF wideband matching circuits, LO/RF input balun circuits, and an IF output balun circuit. The measured results of the fabricated down‐conversion mixer show a positive power conversion gain from 1 to 8 GHz and a bandwidth of about 4.5 GHz.     

Fixed Point Theorems on Product Topological Spaces and Applications

A new collectively fixed point theorem for a family of set-valued mappings defined on product spaces of non-compact topological spaces without linear structure is proved and some special cases are also discussed. As applications, some non-empty intersection theorems of sets with convex sections and equilibrium existence theorem of abstract economies are obtained under much weaker assumptions. Our results includes a number of known results as many special cases.     

Strong visible PL from the nc-Si thin film by Ni silicide mediated crystallization

We studied the growth of nanocrystalline silicon (nc-Si) thin film exhibiting a strong room temperature photoluminescence (PL) at 1.81–2.003 eV. The amorphous silicon was crystallized by Ni silicide mediated crystallization (Ni SMC) and then Secco-etched to exhibit the PL. The PL peak energy and intensity increase with increasing the metal density on the a-Si because of the reduction in the grain size down to 2 nm. The photoluminescence energy and peak intensity depend strongly on the Secco etch time because the grain size is reduced by etching the grain boundaries.     

Correlation between Al2O3 particles and interface of Al-Al2O3 coatings by cold spray

Al-Al₂O₃ composite coatings with different Al₂O₃ particle shapes were prepared on Si and Al substrate by cold spray. The powder compositions of metal (Al) and ceramic (Al₂O₃) having different sizes and agglomerations were varied into ratios of 10:1 wt% and 1:1 wt%. Al₂O₃ particles were successfully incorporated into the soft metal matrix of Al. It was found that crater formation between the coatings and substrate, which is typical characteristic signature of cold spray could be affected by initial starting Al₂O₃ particles. In addition, when the large hard particles of fused Al₂O₃ were employed, the deep and big craters were generated at the interface between coatings and hard substrates. In the case of pure soft metal coating such as Al on hard substrate, it is very hard to get proper adhesion due to lack of crater formation. Therefore, the composite coating would have certain advantages.     

The Fabrication and Characterization of Single‐Component Polymeric White‐Light‐Emitting Diodes

By using Ni⁰‐mediated polymerization, we have systematically synthesized a series of fluorene‐based copolymers composed of blue‐, green‐, and red‐light‐emitting comonomers with a view to producing polymers with white‐light emission. 2,7‐Dibromo‐9,9‐dihexylfluorene, {4‐(2‐[2,5‐dibromo‐4‐{2‐(4‐diphenylamino‐phenyl)‐vinyl}‐phenyl]‐vinyl)‐phenyl}‐diphenylamine (DTPA), and 2‐{2‐(2‐[4‐{bis(4‐bromo‐phenyl)amino}‐phenyl]‐vinyl)‐6‐tert‐butyl‐pyran‐4‐ylidene}‐malononitrile (TPDCM) were used as the blue‐, green‐, and red‐light‐emitting comonomers, respectively. It was found that the emission spectra of the resulting copolymers could easily be tuned by varying their DTPA and TPDCM content. Thus with the appropriate red/green/blue (RGB) unit ratio, we were able to obtain white‐light emission from these copolymers. A white‐light‐emitting diode using the polyfluorene copolymer containing 3 % green‐emitting DTPA and 2 % red‐emitting TPDCM (PG3R2) with a structure of indium tin oxide/poly(3,4‐ethylenedioxythiophene):poly(styrene sulfonic acid)/PG3R2/Ca/Al was found to exhibit a maximum brightness of 820 cd m^–2 at 11 V with Commission Internationale de L'Eclairage (CIE) coordinates of (0.33,0.35), which are close to the standard CIE coordinates for white‐light emission (0.33,0.33).