Theoretical study of the Diels-Alder reactions between singlet (1Delta g) oxygen and acenes

The G3(MP2) method has been employed to study the 1,4-addition reactions between singlet oxygen and five acenes, including benzene, naphthalene, anthrecene, tetracene, and pentacene. In all, nine pathways between O(2) and the five acenes have been investigated. Our calculated results indicate that all nine pathways are concerted and exothermic and that the most reactive sites on the acenes are the center ring's meso-carbons. In addition, reactivity increases along the series benzene < naphthalene < anthrecene < tetracene < pentacene. This trend is identical to that of aromaticity for the five acenes. A correlation between reactivity and aromaticity is briefly rationalized with natural bond orbital (NBO) analysis and frontier molecular orbital (FMO) analysis. Furthermore, some experimental kinetics data from the literature supporting the calculated results are cited.     

Kinetics of heterogeneous atom transfer radical polymerization of styrene by using bis(1,10‐phenanthroline)copper bromide

The kinetics of atom transfer radical polymerization (ATRP) of styrene using bis(1,10‐phenanthroline)copper bromide was investigated. The concentration of the copper catalyst does not affect the propagation rate but does affect the termination process of polymerization appreciably. With increasing reaction temperature the molecular weight distribution of the produced PS becomes more narrow. The apparent activation energy was found to be 75 kJ/mol.     

Pressure‐temperature study of dielectric relaxation of a polyurethane elastomer

The effect of hydrostatic pressure up to 1,361 atms on the dielectric properties of a segmented polyurethane elastomer (Dow 2103‐80AE) is studied at temperatures from 0°C to 80°C. The experimental results show that the relaxation time for both the I–process, associated with the molecular motions in the hard segments, and the α–process, associated with the glass transition, increases with pressure, and this shift is more pronounced for the I–process. Besides the glass transition, it is found that the I–process can be described by the Vogel–Fulcher (V–F) and Williams–Landel–Ferry (WLF) relations. At atmospheric pressure, T_g and T₀ for the I–process are 235.9 K and 4.2 × 10³ K, respectively. Based on the V–F and WLF relations and experimental results, it is found that a parameter, C₁, in the WLF relation is independent of the pressure. Thus, a method is introduced to determine the values of both the characteristic transition temperature (T_g) and activation energy (T₀) for the processes at different pressures. As the pressure increases from atmospheric to 1,361 atms, the increase of T_g for the I–process is about 30°C. The results also show that, for both the I– and the α–processes, T₀ decreases with increasing pressure. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 983–990, 1999     

Kinetics and mechanism of emulsifier-free emulsion copolymerization: Styrene-methyl methacrylate-acrylic acid system

The emulsifier-free emulsion copolymerization of styrene (St) and methyl methacrylate (MMA) in the presence of functional monomer acrylic acid (AA) was carried out in batch process. The kinetics was investigated in detail using model function, Integrated Gamma Function. The morphology and size of particles were monitored continuously by TEM all along the polymerization. It was found that the nucleation, polymerization rate increase with increasing concentration of the functional monomer AA, initiator ammonium persulfate (APS), and polymerization temperature T, and APS plays a predominant role in the particle nucleation process. The particle nucleation stage ceased at about 10% conversion and the steady stage can be extended to about 70% conversion. The particle nucleation is likely to yield primary particle via the mechanism of homogeneous coagulative nucleation and coagulation of the primary particle to yield uniform particles. The particle growth in the postnucleation stage is via a shell growth mechanism. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2649–2656, 1999     

Several modified piezoelectric quartz crystals for determination of omethoate

A chromatographic method for the determination of transition metals in human hair samples is described. The method involves the separation of Cu, Pb, Zn, Ni, Co, Cd and Mn in a C18 column coated with sodium hexadecane-sulfonate (SHS) and spectrophotometric detection (520 nm) after post-column reaction of the eluted metals with 4-(2-pyridylazo)-resorcinol (PAR). The eluent was a 100 mM tartrate solution adjusted to pH 3.1 with a 2 M sodium hydroxide solution (flow-rate=1.0 ml min(-1)). A good separation of the eluted metals (specially for Cu/Pb and Zn/Ni) has been achieved. The detection limits, expressed as mug l(-1), were 2.2 (Cu), 8.0 (Pb), 2.8 (Zn), 1.5 (Ni), 1.5 (Co), 12.0 (Cd), and 1.4 (Mn). A microwave-assisted closed vessel acid digestion procedure with HNO(3)+HClO(4) (4+1 ml) was used for the hair samples solubilisation. Nineteen hair samples were analysed with the proposed method. The results were in good agreement with those obtained by atomic absorption spectrometry (AAS).     

DNA-modified electrodes; part 4: optimization of covalent immobilization of DNA on self-assembled monolayers

The covalent immobilization of DNA onto self-assembled monolayer (SAM) modified gold electrodes (SAM/Au) was studied by X-ray photoelectron spectrometry and electrochemical method so as to optimize its covalent immobilization on SAMs. Three types of SAMs with hydroxyl, amino, and carboxyl terminal groups, respectively, were examined. Results obtained by both X-ray photoelectron spectrometry and cyclic voltammetry show that the largest covalent immobilization amount of dsDNA could be gained on hydroxyl-terminated SAM/Au. The ratio of amount of dsDNA immobilized on hydroxyl-terminated SAMs to that on carboxyl-terminated SAMs and to that on amino-terminated SAMs is (3-3.5): (1-1.5): 1. The dsDNA immobilized covalently on hydroxyl-terminated SAMs accounts for 82.8-87.6% of its total surface amount (including small amount of dsDNA adsorbed). So the hydroxyl-terminated SAM is a good substrate for the covalent immobilization of dsDNA on gold surfaces.     

The Synthesis and Application of the Mesoporous Molecular Sieves MCM-41 — A Review

We report a “delayed neutralization” process for the preparation of highly-ordered aluminosilicate MCM-41 molecular sieves with high thermal and hydrothermal stability, and sharp pore size distribution. However, the structural order and pore size are dependent on the carbon chain length. In the mixture surfactant systems, the pore size of the MCM-41 materials could be fine-tuned. The pore size can be extended from 2.5 to 4.5 nm by adding a suitable amount of hydrocarbons. The tubular morphology of the MCM-41 material of 0.3 to 10 micrometers diameter, where the wall consists of coaxial cylindrical pores of nanometers MCM-41, can be obtained by careful control of the surfactant-water content and the rate of condensation of silica. An optimum condition for automatic synthesis of the hierarchical TWT structure has been accomplished. The addition of 1-alkanols as cosurfactant would not only improve the order of the MCM-41 hexagonal structure but also promote the formation of micrometer-sized hierarchical materials, for example: tubules-within-tubule and uniform-sized hollow spheres of diameter 5.0 ± 1.0 μm. However, the inside of the micron spheres has intricate structures possessing various topological genus ranks. The MCM-41 is a good supporter for Molybdenum oxide catalysts. The rate of deactivation in the catalytic reaction of ethyl-benzene dehydrogenation to styrene increases in the order: M_T < M_P < SiO₂. The physically mixed samples have higher catalytic activity than impregnated ones.     

聚烯丙醇/SiO2有机无机杂化材料的研究

制备;溶胶-凝胶工艺;聚烯丙醇/SiO2有机无机杂化材料的研究     

Effects of chromatography conditions on intact protein separations for top-down proteomics

A chiral stationary phase (CSP) has been prepared by chemically bonding a chiral pseudo-18-crown-6 type host having a 1-phenyl-1,2-cyclohexanediol unit to 3-aminopropyl silica gel. The chiral column was prepared by the slurry-packing method in a stainless steel HPLC column. Normal mobile phases can be used with this CSP in contrast to conventional dynamic coating type CSPs. Enantiomers of 20 out of 30 amino compounds, including 20 amino acids, 2 amino acid methyl esters, 6 amino alcohols, and 2 lipophilic amines, were efficiently separated on columns with this CSP. It is noteworthy that 15 amino compounds out of 30 were separated with better separation factors and shorter retention times compared to the corresponding CSP having pseudo-18-crown-6 with 1-phenyl-1,2-ethanediol as a chiral unit. In view of the correlation between the enantiomer selectivities observed in chromatography and those obtained in gas phase FABMS-EL methods and solution phase titrations, chiral recognition in the host-guest interaction likely contributes to enantiomer separation.     

Separation and determination of lignans from seeds of Schisandra species by micellar electrokinetic capillary chromatography using ionic liquid as modifier

In this paper, a micellar electrokinetic chromatographic (MEKC) method using ionic liquid as modifier for the quantification of the active components of lignans found in the medicinal herbs Schisandra species was developed for the first time. Preliminary investigations employing sodium dodecyl sulfate (SDS) as surfactant did not lead to the necessary resolution of the studied compounds, the addition of ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIM-BF4) to the SDS micellar system resulted in the complete separation of all the compounds. The effects on the separation by several parameters such as BMIM-BF4 and SDS concentration, applied voltage, background electrolyte pH and concentration, were evaluated. Under the optimal conditions (5 mM borate-5 mM phosphate buffer in the presence of 20 mM SDS and 10 mM BMIM-BF4, pH 9.2, applied voltage 25 kV and detection at 254 nm), the method successfully applied to the determination of lignans in extracts of Schisandra chinensis (Turcz.) Baill. and Schisandra henryi C.B. Clarke in less than 13 min. The separation mechanism was also discussed.