Fuzzy consecutive-k-out-of-n:F system reliability

In this paper, we propose a new method to analyze fuzzy consecutive-k-out-of-n:F system reliability using fuzzy GERT. The triangular fuzzy numbers are used to fuzzify probabilities of the consecutive-k-out-of-n:F system and the interval arithmetic, α-cuts and an index of optimism λ are applied to compute fuzzy consecutive-k-out-of-n:F system reliability on fuzzy the GERT network. Futhermore, we can obtain all computation results by “MATHEMATICA” package.     

SIDAC双向开关触发器的典型应用

详细介绍了SIDAC作为一种高压双向触发器的工作特点及其典型的应用电路。     

Gain optimization for Yagi-Uda arrays

The author presents a personal account of the search for a design procedure for Yagi-Uda antenna arrays yielding a maximum gain, or directivity if element losses are neglected. Results on current distributions in the array are briefly reviewed. The analytical approach used to achieve gain optimization by means spacing and length perturbations is sketched. By using both spacing and length perturbations, it was possible to find the optimized array analytically in a systematic way, some examples having gain increases of nearly 80%. The effects of finite dipole radius and mutual coupling were included in the theoretical treatment     

Effects of the architecture and environment on polymeric molecular assemblies of novel amphiphilic diblock copolynorbornenes with narrow polydispersity via living ring‐opening metathesis polymerization

Diblock copolymers of 5‐(methylphthalimide)bicyclo[2.2.1]hept‐2‐ene (NBMPI) and 1,5‐cyclooctadiene were synthesized by living ring‐opening metathesis polymerization with a well‐defined catalyst {RuCl₂(CHPh)[P(C₆H₁₁)₃]₂}. Unhydrogenated diblock copolymers showed two glass transitions due to poly(NBMPI) and polybutadiene segments, such as two glass‐transition temperatures at ?86.5 and 115.3 °C for poly 1a and ?87.2 and 115.3 °C for poly 1b . However, only one melting temperature could be observed for hydrogenated copolymers, such as 119.8 °C for poly 2a and 121.7 °C for poly 2b . The unhydrogenated diblock copolymer with the longer poly(NBMPI) chain (poly 1a ; temperature at 10% mass loss = 400 °C) exhibited better thermal stability than the one with the shorter poly(NBMPI) chain (poly 1b ; temperature at 10% mass loss = 385 °C). Two kinds of hydrogenated diblock copolymers, poly 2a and poly 2b , exhibited relatively poor solubility but better thermal stability than unhydrogenated diblock copolymers because of the polyethylene segments. Poly[(hydrochloride quaternized 2‐norbornene‐5‐methyleneamine)‐b‐butadiene]‐1 (poly 3a ) was obtained after the hydrolysis and quaternization of poly 1a . Dynamic light scattering measurements indicated that the hydrodynamic diameters of the cationic copolymer (poly 3a ) in water (hydrodynamic diameter = 1580 nm without salt), methanol/water (4/96 v/v; hydrodynamic diameter = 1500 nm without salt), and tetrahydrofuran/water (4/96 v/v; hydrodynamic diameter = 1200 nm without salt) decreased with increasing salt (NaCl) concentration. The effect of temperature on the hydrodynamic diameter of hydrophobically modified poly 3a was also studied. The inflection point of the hydrodynamic diameter of poly 3a was observed at various polymer concentrations around 30 °C. The critical micelle concentration of hydrophobically modified poly 3a was observed at 0.018 g dL^?1. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2901–2911, 2006     

Viscometric study of gelatin in dilute aqueous solutions

The viscosities of aqueous solutions of gelatin at different temperatures were carefully measured in a common glass‐capillary Ubbelohde viscometer at dilute to extremely dilute concentrations. The adsorption effect that occurred in the viscosity measurements was theoretically analyzed and discussed. A theory based on Langmuir isotherms could adequately describe the existing data. Some structural information was obtained by the use of an iterative fitting procedure to treat the reduced viscosity data, which disclosed that individual gelatin chains underwent a coil‐to‐helix transition as the solution cooled from 40 to 15 °C. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 1804–1812, 2006     

Preparation and characterization of rigid poly(vinyl chloride)/MMT nanocomposites. II. XRD,morphological and mechanical characteristics

A Haake torque rheometer equipped with an internal mixer is used to study the influence of the amount of sodium montmorillonite (Na⁺‐MMT) and organically modified MMT (O‐MMT) on X‐ray diffraction (XRD), morphology, and mechanical characteristics of rigid poly (vinyl chloride) (PVC)/Na⁺‐MMT and PVC/O‐MMT nanocomposites, respectively. Results of XRD and transmission electron microscopy (TEM) indicate that MMT is partially encapsulated and intercalated in the rigid PVC/Na⁺‐MMT nanocomposites. However, results of XRD and TEM show MMT is partially intercalated and exfoliated in the rigid PVC/O‐MMT nanocomposites. Tensile strength, yield strength, and elongation at break of the rigid PVC/MMT nanocomposites were improved simultaneously with adding 1–3 wt % Na⁺‐MMT or O‐MMT with respect to that of pristine PVC. However, the addition of Na⁺‐MMT or O‐MMT should be kept as not more than 3 wt % to optimize the mechanical properties and the processing stability of the rigid PVC/MMT nanocomposites. SEM micrographs of the fractured surfaces of the rigid PVC/Na⁺‐MMT and PVC/O‐MMT nanocomposites both before and after tensile tests were also illustrated and compared. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 2145–2154, 2006     

金属材料分析方法的选择和施行：第五讲 金属材料中钨的测定（续）

此外,尚有二硫酚、邻羟基酚类试剂、酸性三苯甲烷类试剂、偶氮类试剂以及荧光酮类试剂等也都有应用于钨的光度测定的实例。但由于共存元素的干扰以及方法的成熟程度等问题尚未完全得到解决,在金属材料分析中的应用尚不普遍。其中,苯基荧光酮类试剂对钢铁中低含量钨的测定有一定的应用前景,举两例说明:例1:邻氯苯基荧光酮(o-Cl-PF)-CTMAB光度法测定钢及合金中低含量钨[w(W)0.01%~0·50%]。称取试样0.100 0~0.200 0 g,溶于硫酸-磷酸混合酸(H2SO4+H3PO4+H2O=3+10+12)10 mL中,滴加浓硝酸约1 mL氧化,蒸发至冒白烟,冷却,加水溶解盐类后冷…     

Radiation Effects on Concentrated Potassium Hexacyanoferrate(III) Solutions

The neutron irradiated potassium hexacyanoferrate(III) solutions were analyzed for Fe(CN)₆^4?, Fe(CN)₆^3?, and Prussian blue. The retention values (1.1%) were constant throughout the pH and concentration ranges studied, and did not change with the length of irradiation. The complex behavior of the radiochemical yield of the Fe(CN)₆^4? and Prussian blue was attributed to the competition of the various reactions involved in the irradiation.