Mn位W掺杂对La0.3Ca0.7MnO3体系磁结构的影响

通过对La0.3Ca0.7Mn1-xWxO3(x=0.00,0.04,0.08,0.12,0.15)多晶样品M-T曲线、M-H曲线及ESR谱的测量,研究了Mn位W掺杂对电荷有序体系La0.3Ca0.7MnO3磁结构的影响.结果表明,当掺杂量为0.00≤x≤0.08时,体系存在电荷有序(CO)相,AFM/CO态共存于相变温度以下,电荷有序温度TCO随着W掺杂量的增加而增加;x=0.04时,样品在低温下为FM相与AFM/CO相共存,在CO相建立前、后均有FM从PM中分离出来;当x≥0.12时,CO态融化,在极低温度下存在顺磁-铁磁(PM-FM)相变.     

Some Results behind Dividend Problems

We consider the basic dividend problem of the compound Poisson model with constant barrierstrategy.Some results concealed behind the dividend problem are made explicit in the present work.Differentmethods and some of which are firstly given in this paper.All these results presented certain direct relationshipbetween some important actuary variables in classical risk theory is also revealed.     

Pad effects on material-removal rate in chemical-mechanical planarization

The role of a porous pad in controlling material-removal rate (MRR) during the chemical-mechanical planarization (CMP) process has been studied numerically. The numerical results are used to develop a phenomenological model that correlates the forces on each individual abrasive particle to the applied nominal pressure. The model provides a physical explanation for the experimentally observed domains of pressure-dependent MRR, where the pad deformation controls the load sharing between active-abrasive particles and direct pad-wafer contact. The predicted correlations between MRR and slurry characteristics, i.e., particle size and concentration, are in agreement with experimentally measured trends reported by Ouma¹ and Izumitani.²     

求幂级数收敛半径的方法

指出了文 [1 ]中一个考研题的错误解法 ,并给出求幂级数收敛半径的几种方法     

微型热驱动热声热机热端换热器的优化设计

该文基于热声环境,采用厘米级扁管和deltaE数值计算对微型热声换热器进行了优化设计。     

Surface free energy of CrNx films deposited using closed field unbalanced magnetron sputtering

CrN_x thin films have attracted much attention for semiconductor IC packaging molding dies and forming tools due to their excellent hardness, thermal stability and non-sticking properties (low surface free energy). However, few data has been published on the surface free energy (SFE) of CrN_x films at temperatures in the range 20-170 °C. In this study CrN_x thin films with CrN, Cr(N), Cr₂N (and mixture of these phases) were prepared using closed field unbalanced magnetron sputtering at a wide range of Cr⁺² emission intensity. The contact angles of water, di-iodomethane and ethylene glycol on the coated surfaces were measured at temperatures in the range 20-170 °C using a Dataphysics OCA-20 contact angle analyzer. The surface free energy of the CrN_x films and their components (e.g., dispersion, polar) were calculated using the Owens-Wendt geometric mean approach. The influences of CrN_x film surface roughness and microstructure on the surface free energy were investigated by atomic force microscopy (AFM) and X-ray diffraction (XRD), respectively. The experimental results showed that the lowest total SFE was obtained corresponding to CrN at temperature in 20 °C. This is lower than that of Cr(N), Cr₂N (and mixture of these phases). The total SFE, dispersive SFE and polar SFE of CrN_x films decreased with increasing surface temperature. The film roughness has an obvious effect on the SFE and there is tendency for the SFE to increase with increasing film surface roughness.     

建立军用Foundry的探索

本文从ASIC的基本特点出发,阐述了建立ASIC标准加工线(Foundry)的重要性;国内集成电路产业已经具备建立Foundry的基础,建立有中国特色的Foundry是可以有所作为的。文章介绍了作者在建立军用Foundry方面的探索和初步成果。     

Ca原子的Penning离化

用614.3nm染料激光照射以Ne为缓冲气体的Ca空心阴极灯,观察到了Ca原子的Pen-ning离化效应。对比在Li空心阴极灯中获得的光电流信号,解释了Ca原子的彭宁离化。     

基于CMDCT的AAC编码器心理声学模型的改进

本文提出一种改进的MPEG4-2／4AAC编码结构。与ISO标准参考结构中平行进行DFT和DMDCT不同，改进结构里感知模型和编码器中的时域到频域变换的计算都基于CMDCT进行，将两次变换合并为一次。在保持编码质量的同时，降低了变换部分的计算复杂度。新结构中变换的计算形式得到统一，更加适合编码器的VLSI实现。     

X射线聚束透镜原理及其应用

本文阐述了一种新型的Ｘ射线聚束装置─—Ｘ射线透镜的聚束原理。给出了透镜的基本设计方法，并对它应用于Ｘ射线光刻研究领域的前景作了展望。