Characterization and biological evaluation of paclitaxel-loaded poly(L-lactic acid) microparticles prepared by supercritical CO2

In this study, paclitaxel loaded poly( L-lactic acid) (PTX-PLLA) microparticles were prepared using solution enhanced dispersion by supercritical CO2(SEDS) technique. This supercritical antisolvent technique offers the advantage of negligible organic solvent residua in the drug loaded microparticles. Scanning electron microscopy (SEM) showed that microparticles exhibited rather spherical shape and small particle size with narrow particle size distribution. X-ray diffraction (XRD) and differential scanning calorimeter (DSC) indicated that PTX was amorphously dispersed in the PLLA matrix. The drug loading and encapsulation efficiency of PTX-PLLA microparticles were 14.33% and 62.68%, respectively. In vitro cytotoxicity evaluation of PTX-PLLA microparticles against nonsmall-cell lung cancer A549 and ovarian cancer SKOV3 cell lines indicated that PTX-PLLA had superior antiproliferation activity against the A549 and SKOV3 cell lines, compared with free PTX formulations. The cellular internalization of fluorescent microparticles was evidenced by fluorescence microscope and further confirmed by transmission electron microscopy (TEM). This was attributed to the efficient intracellular accumulation of PTX via cell phagocytosis and sustained release of PTX from PLLA matrix. The anticancer activity of PTX-PLLA was associated with PTX-induced cell apoptosis such as nuclear aberrations, condensation of chromatin and swelling damage in mitochondria. The cell apoptosis index detected by flow cytometry was higher in PTX-PLLA group than in free PTX. The PTX-PLLA formulation, which was obtained through micronization of PTX and encapsulation of micronized PTX into PLLA simultaneously in the SEDS process, significantly potentiated the anticancer activity of PTX.     

Enantioselective organocatalytic formal [3 + 3]-cycloaddition of alpha,beta-unsaturated aldehydes and application to the asymmetric synthesis of (-)-isopulegol hydrate and (-)-cubebaol

[reaction: see text] The first highly enantioselective organocatalyzed carbo [3 + 3] cascade cycloaddition of alpha,beta-unsaturated aldehydes is reported. Using this methodology, crotonaldehyde is converted to 6-hydroxy-4-methylcyclohex-1-enecarbaldehyde, which is used in the synthesis of (-)-isopulegol hydrate, (-)-cubebaol, and p-tolualdehyde as well as (-)-6-hydroxy-4-methyl-1-cyclohexene-1-methanol acetate, an intermediate in the total synthesis of lycopodium alkaloid magellanine. Other alpha,beta-unsaturated aldehydes give rise to chiral cyclohexadienes via formal [4 + 2] reactions.     

Study of molecular behavior in a water nanocluster: size and temperature effect

Temperature and size effects on the behavior of nanoscale water molecule clusters are investigated by molecular dynamics simulations. The flexible three-centered (F3C) water potential is used to model the inter- and intramolecular interactions of the water molecule. The differences between the structural properties for the surface region and those for the interior region of the cluster are also investigated. It is found that as the temperature rises, the average number of hydrogen bonds per water molecule decreases, but the ratio of surface water molecules increases. After comparing the water densities in interior regions and the average number of hydrogen bonds in those regions, we find there is no apparent size effect on water molecules in the interior region, whereas the size of the water cluster has a significant influence on the behavior of water molecules at the surface region.     

A sub-1 V high-precision CMOS bandgap voltage reference

A third-order, sub-1 V bandgap voltage reference design for low-power supply, high-precision applications is presented. This design uses a current-mode compensation technique and temperature-dependent resistor ratio to obtain high-order curvature compensation. The circuit was designed and fabricated by SMIC 0.18 μm CMOS technology. It produces an output reference of 713.6 mV. The temperature coefficient is 3.235 ppm/℃ in the temperature range of -40 to 120 ℃, with a line regulation of 0.199 mV/V when the supply voltage varies from 0.95 to 3 V. The average current consumption of the whole circuit is 49 μA at the supply voltage of 1 V.     

一种用于电视调谐器的宽带CMOS低噪声放大器设计

介绍了一种宽带CMOS低噪声放大器设计方法,采用噪声抵消技术消除输入MOS管的噪声贡献.芯片采用TSMC 0.25μm 1P5M RF CMOS工艺实现.测试结果表明:在50～860MHz工作频率内,电压增益约为13.4dB;噪声系数在2.4～3.5dB之间;增益1dB压缩点为-6.7dBm;输入参考三阶交调点为3.3dBm.在2.5V直流电压下测得的功耗约为30mW.     

Adsorption and reactions of ClCH2CH2OH on clean and oxygen-precovered Cu(100): experimental and computational studies

Temperature-programmed reaction/desorption, reflection-absorption infrared spectroscopy, and density functional theory calculations have been employed to investigate the adsorption and thermal reactions of ClCH2CH2OH on clean and oxygen-precovered Cu(100) surfaces. On Cu(100), ClCH2CH2OH is mainly adsorbed reversibly. The ClCH2CH2OH molecules at a submonolayer coverage can change their orientation with increasing temperature. However, on oxygen-precovered Cu(100), all of the adsorbed ClCH2CH2OH molecules below 0.5 langmuir exposures completely dissociate to generate ethylene and acetaldehyde via the intermediate of ClCH2CH2O-. The computational studies predict that the ClCH2CH2O- is most likely to be adsorbed at the 4-fold hollow sites of Cu(100), with its C-O bond only slightly titled away from the surface normal and with a gauche conformation with respect to the C-C bond. The hollow-site ClCH2CH2O- has an adsorption energy that is 4.4 and 19.2 kcal x mol(-1) lower than that of the ClCH2CH2O- bonded at the bridging and atop sites, respectively. No significant effect of precovered oxygen on the ClCH2CH2O- bonding geometry and infrared band frequencies has been observed, as compared with the case without oxygen.     

Synthesis and characterization of a Ruddlesden-Popper compound: Sr3FeMoO7

A powder sample of Sr₃FeMoO₇ was synthesized by solid-state reaction in reduced atmosphere (5% H₂/Ar). At room temperature, Sr₃FeMoO₇ crystallizes in a typical Ruddlesden-Popper (n=2) structure in the space group I4/mmm, and . The structure refinement indicates that the Fe and Mo ions are randomly distributed in a single B-site with small fraction of B-site and oxygen vacancies. At low temperature, long-range magnetic interaction was observed. The antiferromagnetic magnetic interaction can be described with a large unit cell, and c_m=c_n, in the magnetic space group An′.     

The skeletal rearrangement of gold- and platinum-catalyzed cycloisomerization of cis-4,6-dien-1-yn-3-ols: pinacol rearrangement and formation of bicyclo[4.1.0]heptenone and reorganized styrene derivatives

With gold and platinum catalysts, cis-4,6-dien-1-yn-3-ols undergo cycloisomerizations that enable structural reorganization of cyclized products chemoselectively. The AuCl3-catalyzed cyclizations of 6-substituted cis-4,6-dien-1-yn-3-ols proceeded via a 6-exo-dig pathway to give allyl cations, which subsequently undergo a pinacol rearrangement to produce reorganized cyclopentenyl aldehyde products. Using chiral alcohol substrates, such cyclizations proceed with reasonable chirality transfer. In the PtCl2-catalyzed cyclization of 7,7-disubstituted cis-4,6-dien-1-yn-3-ols, we obtained exclusively either bicyclo[4.1.0]heptenones or reorganized styrene products with varied substrate structures. On the basis of the chemoselectivity/structure relationship, we propose that bicyclo[4.1.0]heptenone products result from 6-endo-dig cyclization, whereas reorganized styrene products are derived from the 5-exo-dig pathway. This proposed mechanism is supported by theoretic calculations.     

氢化物发生–原子吸收光谱法测定铅粉中痕量砷、锑

建立氢化物发生–原子吸收光谱法联用测定铅粉中痕量砷、锑的方法。试样用稀硝酸溶解,用5%抗坏血酸溶液作为砷(Ⅴ)、锑(Ⅴ)的预还原剂,5%的硫脲溶液作为其它元素的掩蔽剂,选用1%硼氢化钠溶液作为还原剂,氢化物反应在10%盐酸介质中进行。在优化的试验条件下,砷、锑的质量浓度在0~20 ng/m L范围内与吸光度线性相关,相关系数r2分别为砷0.999 6,锑0.993 8,方法的检出限分别为砷0.40 ng/m L,锑0.75 ng/m L。砷、锑测定结果的相对标准偏差分别为4.96%,6.27%(n=6),铅粉样品加标回收率分别为砷87.6%,锑79.3%。该方法准确可靠,可用于测定铅粉中痕量砷、锑。     

One-pot microwave synthesis of water-dispersible, ultraphoto- and pH-stable, and highly fluorescent silicon quantum dots

Fluorescent silicon quantum dots (SiQDs) are facilely prepared via one-pot microwave-assisted synthesis. The as-prepared SiQDs feature excellent aqueous dispersibility, robust photo- and pH-stability, strong fluorescence, and favorable biocompatibility. Experiments show the SiQDs are superbly suitable for long-term immunofluorescent cellular imaging. Our results provide a new and invaluable methodology for large-scale synthesis of high-quality SiQDs, which are promising for various optoelectronic and biological applications.