A moment method solution for TMz and TEzwaves illuminating two-dimensional objects above a lossy half space

A moment method (MM) solution for analyzing the electromagnetic shielding and scattering properties of two-dimensional (2-D) objects over a lossy half space is presented. The materials of the objects can be metal, dielectric, or magnetic. Also, the lossy half space is included to simulate the effects of the earth ground or any flat homogeneous lossy surface. An MM based on a volume formulation and a special Green's function in the spectral domain is developed. Both TM _z and TE_z waves incident upon 2-D metal or lossy material structures are demonstrated for the shielding effects of those bodies in the presence of the lossy ground. Besides, the echo widths of a composite object either in free space or above the lossy half space are determined by using the MM. Some of the results are compared with those by other methods, and good agreements are obtained. The MM solution can be used to study the shielding and scattering problems for cylindrical structures located over a lossy ground     

Reliability-estimation and stopping-rules for software testing,based on repeated appearances of bugs

Software-testing (debugging) is one of the most important components in software development. An important question in the debugging process is, when to stop. The choice is usually based on one of two decision criteria: (1) when the reliability has reached a given threshold, and (2) when the gain in reliability cannot justify the testing cost. Various stopping rules and software reliability models are compared by their ability to deal with these two criteria. Two new stopping rules, initiated by theoretical study of the optimal stopping rule based on cost, are more stable than other rules for a large variety of bug structures. The 1-step-ahead stopping rules based on the Musa et. al. basic execution and logarithmic Poisson models, as well as the stopping rule by Dalal and Mallows (1990), work well for software with many relatively small bugs (bugs with very low occurrence rates). The comparison was done by simulation     

自聚焦透镜用于端泵浦DPL的耦合光学系统

本文用自聚焦透镜耦合ＬＤ输出，解决了需要短焦距、大数值孔径透镜的设计和制方面的困难。提出了计算自聚焦透镜耦合效率的简化模型。用自聚焦透镜和一对正交柱面透镜设计了一个耦合系统，并用该耦合系统端泵浦Ｎｄ：ＹＡＧ棒做了实验。     

FREE BOUNDARY PROBLEM ARISING FROM EVAPORATION FROM POROUS MEDIUM

ＦＲＥＥＢＯＵＮＤＡＲＹＰＲＯＢＬＥＭＡＲＩＳＩＮＧＦＲＯＭＥＶＡＰＯＲＡＴＩＯＮＦＲＯＭＰＯＲＯＵＳＭＥＤＩＵＭＹＡＮＧＬＩＰＩＮＧ（杨力平）（ＤｅｐａｒｔｍｅｎｔｏｆＡｐｐｌｉｅｄＭａｔｈｅｍａｔｉｃｓ，ＴｓｉｎｇｈｕａＵｎｉｖｅｒｓｉｔｙ，Ｂｅ...     

锥形阀压电薄膜泵的初步研究

提出一种适应高频工作状态的压电薄膜泵结构，实步分析了所采用的锥形阀的工作原理与作用，设计了试验泵结构，加工了样机，通过试验证明了锥形阀的有效性，为进一步的研究打下了基础。     

离子注入机的国内外现状

本文简要介绍了离子注入和器件的关系,概述了离子注入机的发展现状和趋势,初步探讨了我国离子注入机不能形成产业的原因。     

A theorem of Grünwald-type for Hermite-Fejér interpolation of higher order

In this paper we give a theorem of Grünwald-type for (0, 1,...,m-1) Hermite-Fejér interpolation (m=2, 4,...), which extends the famous result for a strongly normal system of nodes in the casem=2 given by Grünwald in [1].     

美国大联盟高清晰度电视地面传输系统野外测试结果

本文概述了ＧＡ－ＨＤＴＶ的地面ＶＳＢ传输系统的野外测试验情况。此次测试由联邦以通信委员会高级电视业务咨询委员会负责组织。     

Synthesis of optically active poly(N‐propargylsulfamides) with helical conformation

A novel chiral N‐propargylsulfamide monomer ( 1a ) and its enantiomer ( 1b ) were synthesized and polymerized with (nbd)Rh⁺B^?(C₆H₅)₄ as a catalyst providing poly(1) (poly( 1a ) and poly( 1b )) in high yields (≥99%). Poly(1) could take stable helices in less polar solvents (chloroform and THF), demonstrated by strong circular dichroism signals and UV–vis absorption peaks at about 415 nm and the large specific rotations; but in more polar solvents including DMF and DMSO, poly(1) failed to form helix. Quantitative evaluation with anisotropy factor showed that the helical screw sense had a relatively high thermal stability. These results together with the IR spectra measured in solvents showed that hydrogen bonding between the neighboring sulfamide groups is one of the main driving forces for poly(1) to adopt stable helices. In addition, copolymerization of monomer 1a and monomer 2 was conducted, the solubility of poly(1) was improved drastically. However, the copolymerization had adverse effects on the formation of stable helices in the copolymers. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 500–508, 2007     

Synthesis of grafted poly(p‐phenyleneethynylene) with energy donor–acceptor architecture via atom transfer radical polymerization: Towards nonaggregating and hole‐facilitating light‐emitting material

In this contribution, we demonstrate a new effective methodology for constructing highly efficient and durable poly(p‐phenyleneethynylene) (PPE) containing emissive material with nonaggregating and hole‐facilitating properties through the introduction of hole‐transporting blocks into the PPE system as the grafting coils as well as building the energy donor–acceptor architecture between the grafting coils and the PPE backbone. Poly(2‐(carbazol‐9‐yl)ethyl methacrylate) (PCzEMA), herein, is chosen as the hole‐transporting blocks, and incorporated into the PPE system as the grafting coils via atom transfer radical polymerization. The chemical structure of the resultant copolymer, PPE‐g‐PCzEMA, was characterized by NMR and gel permeation chromatography, showing that the desirable copolymer was obtained with the narrow polydispersity. The increased thermal stability of PPE‐g‐PCzEMA was confirmed by thermogravimetric analysis and differential scanning calorimetry along with its macroinitiator. The optoelectronic properties of this copolymer were studied in detail by ultraviolet‐visible absorption, photoluminescence emission and excitation spectra, and cyclic voltammogram (CV). The results indicate that PPE‐g‐PCzEMA exhibits the solid‐state luminescent property dominated by individual lumophores, and also the energy transfer process from the PCzEMA blocks to the PPE backbone with a relatively higher energy transfer efficiency in the solid‐state compared to that of the solution state. Additionally, the hole‐injection property is greatly facilitated due to the presence of PCzEMA, as confirmed by CV profiles. All these data indicate that PPE‐g‐PCzEMA is a good candidate for use in optoelectronic devices. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 3776–3787, 2007