第I类非自共轭锥上的Gamma函数

本文将Ｇａｍｍａ函数及Ｓｉｅｇｅｌ积分推广到一般的第Ｉ类非自共轭锥上．作为其应用，显式给出了以这些锥为底的管状域（或第一类Ｓｉｅｇｅｌ域）的Ｃａｕｃｈｙ Ｓｚｅｇ¨ｏ核和形式Ｐｏｉｓｏｎ核．     

角状螺旋固体激光器热畸变自补偿特性分析

利用张量方法对角状螺旋光路固体激光器作了分析，证实其在ｘ、ｙ两方向对激光介质的热畸变有自补偿作用，且ｘ、ｙ两方向呈对称性．     

Modeling of current-voltage characteristics for strained andlattice matched HEMT's on InP substrate using a variational chargecontrol model

A model for the calculation of the current-voltage characteristics of strained In_0.52Al_0.48As/In_xGa_1-xAs on InP substrate High Electron Mobility Transistors (HEMT's), based on a variational charge control model, is presented. A polynomial fit of the two-dimensional electron gas (2DEG) density is used for the calculation of the current-voltage characteristics. The effect of strain is introduced into the 2DEG density versus gate voltage relation. Very good agreement between the calculated and measured I-V characteristics was obtained. In addition, our results show that, for an indium mole fraction of the In_xGa_1-xAs channel in the range 0.53-0.60, increasing the indium mole fraction lowers the threshold voltage and hence increases the drain current at the same gate bias     

裂解气相色谱质谱法研究增塑剂邻苯二甲酸二甲酯的热降解机理

用裂解气相色谱-质谱联用方法研究了橡胶产品中使用的增塑剂邻苯二甲酸二甲酯(DMP)在不同温度条件下的热裂解行为.对不同温度条件下裂解产物的分析表明,在初始阶段DMP的裂解产物主要为二氧化碳、苯、甲苯和苯甲酸甲酯.随着温度的升高苯甲酸甲酯进一步裂解成为分子质量更小的自由基,并发生稠环化反应形成更稳定的菲、蒽、间-联三苯、三亚苯等芳香族多环化合物.根据分析实验提供的裂解产物信息和有机物热裂解化学反应的原理对DMP的热裂解反应机理作了探讨,表明在废旧合成橡胶热裂解回收过程中,增塑剂DMP的高温裂解会产生多环芳烃污染物.应选择合适裂解工艺和裂解温度,以减少对环境的污染.     

适用于高速长途DWDM系统的色散管理线路

对于高速长途密集波分复用（DWDM）传输，必需采用各种各样的色散补偿、色散管理技术，其中，交替使用正负色散光纤构成色散管理线路（DML）是可行的解决方案之一，在国际上已经取得显著进展，正成为人们关注的焦点，国内在这方面的研究报道还少见.文章以高速长途DWDM系统对传输线路的性能要求为基础，综述了有代表性的3种不同类型的DML的特点和最新进展。     

Model-based automated extraction of microtubules from electron tomography volume.

We propose a model-based automated approach to extracting microtubules from noisy electron tomography volume. Our approach consists of volume enhancement, microtubule localization, and boundary segmentation to exploit the unique geometric and photometric properties of microtubules. The enhancement starts with an anisotropic invariant wavelet transform to enhance the microtubules globally, followed by a three-dimensional (3-D) tube-enhancing filter based on Weingarten matrix to further accentuate the tubular structures locally. The enhancement ends with a modified coherence-enhancing diffusion to complete the interruptions along the microtubules. The microtubules are then localized with a centerline extraction algorithm adapted for tubular objects. To perform segmentation, we novelly modify and extend active shape model method. We first use 3-D local surface enhancement to characterize the microtubule boundary and improve shape searching by relating the boundary strength with the weight matrix of the searching error. We then integrate the active shape model with Kalman filtering to utilize the longitudinal smoothness along the microtubules. The segmentation improved in this way is robust against missing boundaries and outliers that are often present in the tomography volume. Experimental results demonstrate that our automated method produces results close to those by manual process and uses only a fraction of the time of the latter.     

Modular and rapid testing of SOCs with unwrapped logic blocks

Extensive research has been carried out for test planning of core-based system-on-a-chip devices. Most of the prior work assumes that all of the embedded cores are wrapped for test purpose. However, some designs may contain user-defined logic or cores that cannot be wrapped due to area constraints or timing violations. This paper discusses how these unwrapped logic blocks can be tested rapidly by adapting the TestRail architecture, which uses only the test control mechanism and the test instructions available through the IEEE 1500 standard for embedded core test. A new test scheduling algorithm, which facilitates a concurrent test of both unwrapped logic blocks and IEEE 1500-wrapped cores, is proposed, and experiments show that it outperforms a previous approach when the available number of tester channels and/or the number of unwrapped logic blocks are small.     

p型碲镉汞液相外延材料Ag掺杂的研究

利用SIMS和变温霍尔测量手段对P型Hg0.77Gd0.23Te液相外延材料的Ag掺杂技术、机理及掺杂碲镉汞材料的性能进行了研究。结果表明采用AgNO3溶液直接浸泡方式对该材料进行掺Ag是成功的，掺杂浓度与被掺杂材料中的汞空位浓度是一致的，掺杂后，P型碲镉汞材料的受主能级比掺杂前有明显的减小，从实验结果可看到掺Ag碲镉汞材料的电学性能在室温下保持稳定。     

倾斜下降管气液两相分层流截面含气率的计算与液层高度的预测

分层流是气液两相流中常见的流动型式，分层流中液层高度是计算的基本数据，由于界面波的存在，对液层的测量和预测都很困难．Ｖｌａｃｈｏｓ提出了预测气液两相分层流液层厚度的关系式，但这一关系式并不适用于倾斜下降管气液两相流．本文提出了计算倾斜下降管气液两相分层流截面含气率的理论模型，在这种模型下得到的截面含气率和实验结果符合良好．在大量实验的基础上，考虑了倾角、管径、气液各相折算速度的影响，根据实验数据提出了预测液层厚度的关系式。