Polymer-precursor-derived (am-) SiC/TiC composites for resistive heaters in large volume multi-anvil high pressure/high-temperature apparatus

(Amorphous-)SiC/TiC composites for resistive tubular heaters in HP/HT experiments were obtained via a polymer-precursor process. A slurry consisting of a commercial SiC-precursor polymer (allylhydridopolycarbosilane, AHPCS) and TiC powder as conductive filler was applied to the inner walls of zirconia insulation tubes, using a centrifugation-casting method. Resistive coatings with homogeneous thickness of ～200 μm were obtained. The heaters were tested in octahedral multi-anvil assemblies at ～10 GPa with simultaneous recording of heating voltage and current. Up to a maximum temperature of ～1800°C they showed temperature vs. power characteristics reproducible from batch to batch, with resistance decreasing from 0.08 to 0.02 Ω during heating. Microstructural characterization using SEM/EDX was carried out on the recovered SiC/TiC composite material, as well as on pristine resistive heaters directly after coating and curing to 230°C, and after additional pyrolysis at 900°C in argon. In all cases, a stable composite microstructure of an interpenetrating network of TiC particles with either silicon carbide polymer precursor or an amorphous SiC phase were found. The composites were characterized by XRD and thermogravimetry. Further improvement of coating procedure and materials combination (precursor/filler/insulator substrate) may result in advanced coatings, operational well beyond 2000°C.     

Automated determination of size and morphology information from soot transmission electron microscope (TEM)-generated images

The thermophoretic sampling of particulates from hot media, coupled with transmission electron microscope (TEM) imaging, is a combined approach that is widely used to derive morphological information. The identification and the measurement of the particulates, however, can be complex when the TEM images are of low contrast, noisy, and have non-uniform background signal level. The image processing method can also be challenging and time consuming, when the samples collected have large variability in shape and size, or have some degree of overlapping. In this work, a three-stage image processing sequence is presented to facilitate time-efficient automated identification and measurement of particulates from the TEM grids. The proposed processing sequence is first applied to soot samples that were thermophoretically sampled from a laminar non-premixed ethylene-air flame. The parameter values that are required to be set to facilitate the automated process are identified, and sensitivity of the results to these parameters is assessed. The same analysis process is also applied to soot samples that were acquired from an externally irradiated laminar non-premixed ethylene-air flame, which have different geometrical characteristics, to assess the morphological dependence of the proposed image processing sequence. Using the optimized parameter values, statistical assessments of the automated results reveal that the largest discrepancies that are associated with the estimated values of primary particle diameter, fractal dimension, and prefactor values of the aggregates for the tested cases, are approximately 3, 1, and 10 %, respectively, when compared with the manual measurements.     

车联网中V2R通信功率分配策略

针对车载应用对车辆与路侧单元(V2R)的通信质量及系统吞吐量要求越来越高,提出V2R通信功率分配策略,以提高通信链路质量及系统的吞吐量。该策略利用博弈论对功率分配过程进行分析并找出最优分配方案。当效用函数经过多次迭代而达到纳什均衡时,表明系统已经获得最优的功率分配方案。仿真结果表明,本文提出的车联网功率分配策略有利于减小各通信链路之间的干扰,且达到了提升系统吞吐量的目的。     

5,10,15,20-四(对-癸酰氧基苯基)卟啉过渡金属配合物的合成与表征

液晶;5;10;15;20-四(对-癸酰氧基苯基)卟啉过渡金属配合物的合成与表征     

负载生物活性功能基聚醚氨酯的表面自由能与表面血液相容性研究

水相接触角;负载生物活性功能基聚醚氨酯的表面自由能与表面血液相容性研究     

应用近红外技术测定黄豆粕中水分、蛋白质和粗脂肪

应用近红外分析仪（NIR）快速测定黄豆粕中水分、蛋白质和粗脂肪的含量,通过光谱扫描统计分析,分别找出测量黄豆粕水分、蛋白质、粗脂肪的波长及校准常数值,经数理统计分析结果表明：近红外法与常规水分测定法经典凯氏定氮法、索氏浸提法所测定的结果呈密切的线性相关,检测结果令人满意。     

使用一维机械模板的高分辨阿达玛变换显微图像探测技术研究

阿达玛变换（HT）是一种类似于傅里叶变换（FT）的光谱调制技术,具有多通道同时检测和多通道成像能力等优点,但两者的数学模型、对光信号的调制方法和调制手段都不一样。由于HT仅涉及四则运算,而FT涉及较为复杂的三角函数和复数运算,所以HT的解码速度快于FT。在成像技术方面,HT具有直接成像的能力,而FT只能对通过其它方式获取的图像进行加工处理。     

Ce1-xGdxO2-x/2的溶胶-凝胶法合成及其性质

利用溶胶-凝胶法合成了Ce₁-xGdxO_2-x/2(x=0.1～0.6)系列固体电解质,系统地研究了其结构、热膨胀系数和导电性.XRD结果表明,160℃即完全形成立方萤石结构.由于溶胶-凝胶法合成的物质粒度均匀,颗粒小,故在较低温度(1300℃)时即可形成高致密样品,此温度明显低于传统的高温固相法烧结温度(1600～1650℃).高温X射线衍射测得Ce_0.8Gd_0.2O_1.9的热膨胀系数为8.125×10^-6K₁.阻抗谱表明,溶胶-凝胶法合成可减少或消除固体电解质的晶界电阻,600℃时Ce_0.8Gd_0.2O_1.9的电导率为5.26×10^-3S/cm,活化能E_a=0.82eV.