Bioavailability Enhancement of Cepharanthine via Pulmonary Administration in Rats and Its Therapeutic Potential for Pulmonary Fibrosis Associated with COVID-19 Infection

Cepharanthine (CEP) has excellent anti-SARS-CoV-2 properties, indicating its favorable potential for COVID-19 treatment. However, its application is challenged by its poor dissolubility and oral bioavailability. The present study aimed to improve the bioavailability of CEP by optimizing its solubility and through a pulmonary delivery method, which improved its bioavailability by five times when compared to that through the oral delivery method (68.07% vs. 13.15%). An ultra-performance liquid chromatography tandem-mass spectrometry (UPLC-MS/MS) method for quantification of CEP in rat plasma was developed and validated to support the bioavailability and pharmacokinetic studies. In addition, pulmonary fibrosis was recognized as a sequela of COVID-19 infection, warranting further evaluation of the therapeutic potential of CEP on a rat lung fibrosis model. The antifibrotic effect was assessed by analysis of lung index and histopathological examination, detection of transforming growth factor (TGF)-β1, interleukin-6 (IL-6), α-smooth muscle actin (α-SMA), and hydroxyproline level in serum or lung tissues. Our data demonstrated that CEP could significantly alleviate bleomycin (BLM)-induced collagen accumulation and inflammation, thereby exerting protective effects against pulmonary fibrosis. Our results provide evidence supporting the hypothesis that pulmonary delivery CEP may be a promising therapy for pulmonary fibrosis associated with COVID-19 infection.     

电子镇流器用高压长寿命铝电解电容器

铝电解电容器是节能灯用电子镇流器的关键元件，由于镇流器的工作环境严酷，其电容器最易失效。改进后的ＣＤ１１Ｈ系列电子镇流器用铝电解电容器标准突出了１０５℃下满负荷工作３０００ｈ的高可靠性要求。设计目标放在延长寿命，提高可靠性，减少失效率方面。选用电容器时要注意工作电压、上限工作温度、耐久性。     

The impact of cellulose structure on binding interactions with hemicellulose and pectin

Four cellulose substrates including highly crystalline cellulose nanowhiskers (CNWs) from Gluconacetobacter xylinus (cellulose Iα) or cotton (cellulose Iβ) and amorphous cellulose derived from CNWs (phosphoric acid swollen cellulose nanowhiskers, PASCNWs) were used to explore the interaction between cellulose and well-defined xyloglucan, xylan, arabinogalactan and pectin. The binding behavior was characterized by adsorption isotherm and Langmuir models. The maximum adsorption and the binding constant of xyloglucan, xylan and pectin to any CNWs were always higher than to PASCNWs derived from the same source. The binding affinity of xyloglucan, xylan and pectin to G. xylinus cellulose was generally higher than to cotton cellulose, showing that binding interactions depended on the biological origin of cellulose and associated differences in its structure. The surface area, porosity, crystal plane and degree of order of cellulose substrate may all impact the interactions.     

Direct Henry reactions with modified calcium oxide as solid catalyst

Commercial CaO was modified simply with benzyl bromide. The modified CaO had good water resistance, and characterization by FTIR and TG revealed the modifier was chemically bonded to the CaO surface. Commercial CaO and CaO modified with benzyl bromide were investigated as catalysts for the Henry reaction between benzaldehyde and nitromethane. It was found that the catalytic activity of the modified CaO was greatly improved, with high conversion of benzaldehyde to the (E)-phenyl nitroolefin and 1-phenyl-2-nitroethanol, and with different selectivity from commercial CaO. The effect of modification and reaction conditions on yield, selectivity, and mechanism were studied thoroughly.     

Point Defects in CdZnTe Crystals Grown by Different Techniques

We studied, by current deep-level transient spectroscopy (I-DLTS), point defects in CdZnTe detectors grown by different techniques. We identified 12 different traps with energy levels from 7 meV to 1.1 eV. Although the levels of most of the identified defects were independent of the crystal growth techniques, nevertheless there were some associated differences in the traps’ energies and densities.     

Temperature Dependence of 1H Paramagnetic Chemical Shifts in Actinide Complexes,Beyond Bleaney's Theory: The AnVIO22+–Dipicolinic Acid Complexes (An=Np,Pu) as an Example

Actinide +VI complexes ( = , and ) with dipicolinic acid derivatives were synthesized and characterized by powder XRD, SQUID magnetometry and NMR spectroscopy. In addition, and complexes were described by first principles CAS based and two-component spin-restricted DFT methods. The analysis of the ¹H paramagnetic NMR chemical shifts for all protons of the ligands according to the X-rays structures shows that the Fermi contact contribution is negligible in agreement with spin density determined by unrestricted DFT. The magnetic susceptibility tensor is determined by combining SQUID, pNMR shifts and Evans’ method. The SO-RASPT2 results fit well the experimental magnetic susceptibility and pNMR chemical shifts. The role of the counterions in the solid phase is pointed out; their presence impacts the magnetic properties of the complex. The temperature dependence of the pNMR chemical shifts has a strong contribution, contrarily to Bleaney's theory for lanthanide complexes. The fitting of the temperature dependence of the pNMR chemical shifts and SQUID magnetic susceptibility by a two-Kramers-doublet model for the complex and a non-Kramers-doublet model for the complex allows for the experimental evaluation of energy gaps and magnetic moments of the paramagnetic center.     

Real‐Time Measurement of the Size Distribution of Diesel Exhaust Particles using a Portable 4‐stage Electrical Low Pressure Impactor

For this study, a 4 stage electrical low pressure impactor was designed to measure the real‐time size distribution of diesel particulate matter (DPM). For the performance evaluation, sodium chloride (NaCl) particles and dioctyl sebacate (DOS) particles were used. After evaluating the collection efficiency of each stage of the impactor, the size distributions of test particles were estimated using electrical current data and their inversion algorithm, and this was found to agree with the results obtained by a scanning mobility particle sizer (SMPS). For measurement of DPM, a common‐rail direct injection (CRDI) diesel engine, for engine speeds of 1,200 rpm and 1,500 rpm at 2.7 kgf·m, was used. Therefore, it was found that the size distribution of the DPM could be easily obtained, with the currents measured by the impactor and the data inversion algorithm, in less than 5 seconds. Furthermore, the effective density of the DPM could be obtained using the calculated results and the SMPS data.     

Predicting hiCE inhibitors based upon pharmacophore models derived from the receptor and its ligands

Human intestinal carboxyl esterase (hiCE) is a drug target for ameliorating irinotecan-induced diarrhea. By reducing irinotecan-induced diarrhea, hiCE inhibitors can improve the anti-cancer efficacy of irinotecan. To find effective hiCE inhibitors, a new virtual screening protocol that combines pharmacophore models derived from the hiCE structure and its ligands has been proposed. The hiCE structure has been constructed through homology techniques using hCES1’s crystal structure. The hiCE structure was optimized via molecular dynamics simulations with the most known active hiCE inhibitors docked into the structure. An optimized pharmacophore, derived from the receptor, was then generated. A ligand-based pharmacophore was also generated from a larger set of known hiCE inhibitors. The final hiCE inhibitor predictions were based upon the virtual screening hits from both ligand-based and receptor-based pharmacophore models. The hit rates from the ligand-based and receptor-based pharmacophore models are 88% and 86%, respectively. The final hit rate is 94%. The two models are highly consistent with one another (85%). This proves that both models are reliable.     

Microwave‐Assisted Synthesis of Ethyl 1,3‐Disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates

A novel series of ethyl 1,3‐disubstituted‐1,6‐dihydropyrrolo[2,3‐c]pyrazole‐5‐carboxylates can be rapidly and efficiently synthesized in excellent yields by condensing a variety of 1,3‐substituted‐4‐formyl‐5‐chloropyrazole with ethyl isocyanoacetate in the presence of 1‐methyl‐3‐butylimidazolium hydroxide under microwave irradiation. The simple experimental procedure, DMSO‐free condition, short period of conversion, and excellent yields are the advantages of the present method. The structures of the novel compounds are confirmed by IR, ¹H NMR, ¹³C NMR, MALDI‐TOF MS, and elemental analysis.     

Syngas production from methane over CeO2-Fe2O3 mixed oxides using a chemical-looping method

A series of mixed oxides Ce_{1 ? x} Fe _x O₂ was prepared by a hydrothermal method. XRD and Raman spectra were measured to study the structure of the prepared materials. The temperature-programmed reduction was undertaken to estimate reducibility of the oxides. Syngas generation from methane using these materials as oxygen carriers/catalysts via a chemical-looping procedure was investigated in detail. This procedure includes catalytic oxidation and decomposition of methane to produce H₂-rich gas at the first step followed by the production of the CO-rich gas by oxidizing the carbon deposited on deactivated catalysts. The results showed that all iron ions were incorporated into the ceria lattice with the formation of oxygen vacancies in the Ce_0.9Fe_0.1O₂ sample, while isolated Fe₂O₃ particles were distributed on the surface of the Ce_0.8Fe_0.2O₂ sample. TPR measurements and the analysis of the two-step chemical-looping reactions indicated a strong interaction between the Ce and Fe species which accounts for an increased activity of the mixed oxides in the syngas generation compared to that of individual oxides. Among the several samples, the Ce_0.8Fe_0.2O₂ catalyst showed the highest activity for methane partial oxidation due to the synergetic effects caused by the interaction of surface iron entities and Ce-Fe solid solution. In addition, selective oxidation of carbon by oxygen to CO can also be found over this material since gaseous products are formed at the carbon oxidation step with the selectivity to CO reaching 91.2%. Evidence is presented that syngas can be feasibly produced from methane with high selectivity via the chemical-looping procedure over the CeO₂-Fe₂O₃ mixed oxides.