Chitosan-mediated and spatially selective electrodeposition of nanoscale particles

Nanoscale particles offer a variety of interesting properties, and there is growing interest in their assembly into higher ordered structures. We report that the pH-responsive aminopolysaccharide chitosan can mediate the electrodeposition of model nanoparticles. Chitosan is known to electrodeposit at the cathode surface in response to a high localized pH. To demonstrate that chitosan can mediate nanoparticle deposition, we suspended fluorescently labeled latex nanoparticles (100 nm diameter spheres) in a chitosan solution (1%) and performed electrodeposition (0.05 mA/cm2 for several minutes). Results demonstrate that chitosan is required for nanoparticle electrodeposition; chitosan confers spatial selectivity to electrodeposition; and nanoparticles distribute throughout the electrodeposited chitosan film. Additionally, we observed that the deposited films reversibly swell upon rehydration. This work indicates that chitosan provides a simple means to assemble nanoparticles at addressable locations and provides further evidence that stimuli-responsive biological materials may facilitate fabrication at the microscale.     

Molecular mechanics (MM2) calculations and cone angles of phosphine ligands

Molecular mechanics (MM2) calculations were performed on 54 conformations of 18 phosphines (PH₃; PH_3−nR_n, where n = 1,…3, and R = Me and Et, n = 1 or 2 and R =ⁱPr, and n = 1 and R =^tBu, PMe₂Et, PMeEt₂, and PPhMe₂, and PPh₂R where R = Me, Et, ⁱPr, ^tBu and Ph). The results are compared to those previously obtained from MINDO/3 and MNDO calculations, and to experimental data. Single conformer cone angles and weighted average cone angles were calculated from MM2 optimized geometries employing Tolman's general definition, and they are compared to Tolman's values, MINDO/3 results, and T.L. Brown's E_R values. Of the cone angle definitions used, the weighted average values are suggested as the best single representation of phosphine ligand sizes. The steric parameters (cone angle and E_R values) alone, and in conjunction with electronic parameters, are correlated with experimental data.     

Polarization of coherent synchrotron radiation from an electron beam rotating in a plasma

After eliminating reflections from the walls of the plasma container, we observed polarization of the coherent synchrotron radiation from a relativistic electron beam rotating in a plasma. Several features of the polarization agree well with calculations based on the single particle synchrotron radiation theory. A particular polarization ratio (Fig. 3) does not, however. We deduce from this direct diffraction of the radiation by the beam electrons. This is strong evidence for beam-particle bunches of size cm. Also, there must be some absorption of the extraordinary wave to account for the observations. We suggest a way to apply these results to measure the pitch angle of the beam.Work supported by Army Research Office.     

Miniaturized Flexible Electronic Systems with Wireless Power and Near‐Field Communication Capabilities

A class of thin, lightweight, flexible, near‐field communication (NFC) devices with ultraminiaturized format is introduced, and systematic investigations of the mechanics, radio frequency characteristics, and materials aspects associated with their optimized construction are presented. These systems allow advantages in mechanical strength, placement versatility, and minimized interfacial stresses compared to other NFC technologies and wearable electronics. Detailed experimental studies and theoretical modeling of the mechanical and electromagnetic properties of these systems establish understanding of the key design considerations. These concepts can apply to many other types of wireless communication systems including biosensors and electronic implants.     

Novel,highly polarizable thiophene derivatives for use in nonlinear optical applications

The synthesis of a variety of thiophene-containing materials for use in electro-optic devices requiring highly birefringent materials is reported. The refractive indices were measured with the use of an Abbé refractometer, and from these results the optical anisotropies, polarizabilities and order parameters were determined. The replacement of a phenyl ring by thiophene leads to large enhancements of polarizability. The most significant increases in polarizability anisotropy were observed when the rigid core was a collinear 5,5′-disubstituted-2,2′-dithienyl unit. The changes in the optical properties are discussed in terms of the structural units (thiophene, phenyl, isothiocyanate, nitrile, butylsulfanyl, alkoxy and alkyl moieties) used and their positions with respect to the molecular core.     

Fabrication of gold micro-spine structures for improvement of cell/device adhesion

Improvement of the interface contact between biological objects and electronic devices can significantly enhance the quality of electronic signal transfer. The surface of biosensor can be artificially modified in order to strengthen the adhesion of biological cells. We report on results of fabrication of micron and submicron golden spines by means of e-beam lithography and electroplating. The fabrication technique allows easy modification of the size and shape of golden spines by variation of processing parameters. The structures with different spine profiles and spacing have been fabricated for optimization of cell growth conditions. We present the results of growth of rat cortical neurons on the surface of spine modified samples. Well-defined cell guidance was established at the spine arrays. Furthermore, the results of transmission electron microscope and focused ion beam technique confirm the good adhesion between the spines and cell structures.     

Single‐pulse pulsed laser polymerization–electron paramagnetic resonance investigations into the termination kinetics of n‐butyl acrylate macromonomers

The termination of model mid‐chain radicals (MCRs), which mimic radicals that occur in acrylate polymerization over a broad range of reaction conditions, has been studied by single‐pulse pulsed laser polymerization (SP‐PLP) in conjunction with electron paramagnetic resonance spectroscopy. The model radicals were generated by initiator‐fragment addition to acrylic macromonomers that were preformed prior to the kinetic experiments, thus enabling separation of termination from the propagation reaction, for these model radicals propagate sparingly, if at all, on the timescale of SP‐PLP experiments. Termination rate coefficients of the MCRs were determined in the temperature range of 0–60°C in acetonitrile and butyl propionate solution as well as in bulk macromonomer over the range of 0–100 °C. Termination rate coefficients slightly below those of the corresponding secondary radicals were deduced, demonstrating the relatively high termination activity of this species, even when undergoing MCR–MCR termination. For chain length of 10, a reduction by a factor of 6 is observed. Unusually high activation energies were found for the termination rate coefficient in these systems, with 35 kJ mol^?1 being determined for bulk macromonomer. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Novel Copolymers of Styrene and Alkyl and Alkoxy Ring‐Trisubstituted Methyl 2‐Cyano‐3‐phenyl‐2‐propenoates

Electrophilic trisubstituted ethylene monomers, akyl and alkoxy ring‐trisubstituted methyl 2‐cyano‐3‐phenyl‐2‐propenoates, RC₆H₂CH[dbnd]C(CN)CO₂CH_3, (where R is 2,3‐dimethyl‐4‐methoxy, 2,5‐dimethyl‐4‐methoxy‐, 2,3,4‐trimethoxy‐, 2,4,5‐trimethoxy, 2,4,6‐trimethoxy, and 2,4‐dimethoxy‐3‐methyl), were synthesized by the piperidine catalyzed Knoevenagel condensation of ring‐substituted benzaldehydes and methyl cyanoacetate, and characterized by CHN elemental analysis, IR, ¹H‐ and ¹³C‐NMR. Novel copolymers of the ethylenes and styrene were prepared at equimolar monomer feed composition by solution copolymerization in the presence of a radical initiator (AIBN) at 70°C. The composition of the copolymers was calculated from nitrogen analysis, and the structures were analyzed by IR, ¹H and ¹³C NMR, GPC, DSC, and TGA. High T_g of the copolymers in comparison with that of polystyrene indicates a substantial decrease in chain mobility of the copolymer due to the high dipolar character of the trisubstituted ethylene monomer unit. The gravimetric analysis indicated that the copolymers decompose in the 283–306°C range.