The synthesis, structure and ethene polymerisation catalysis of mono(salicylaldiminato) titanium and zirconium complexes

The silyl ethers 3-But-2-(OSiMe3)C6H3CH=NR (2a-e) have been prepared by deprotonation of the known iminophenols (1a-e) and treatment with SiClMe3 (a, R = C6H5; b, R = 2,6-Pri2C6H3; c, R = 2,4,6-Me3C6H2; d, R = 2-C6H5C6H4; e, R = C6F5). 2a-c react with TiCl4 in hydrocarbon solvents to give the binuclear complexes [Ti{3-But-2-(O)C6H3CH=N(R)}Cl(mu-Cl3)TiCl3] (3a-c). The pentafluorophenyl species 2e reacts with TiCl4 to give the known complex Ti{3-But-2-(O)C6H3CH=N(R)}2Cl2. The mononuclear five-coordinate complex, Ti{3-But-2-(O)C6H3CH=N(2,4,6-Me3C6H2)}Cl3 (4c), was isolated after repeated recrystallisation of 3c. Performing the dehalosilylation reaction in the presence of tetrahydrofuran yields the octahedral, mononuclear complexes Ti{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (5a-e). The reaction with ZrCl4(THF)2 proceeds similarly to give complexes Zr{3-But-2-(O)C6H3CH=N(R)}Cl3(THF) (6b-e). The crystal structures of 3b, 4c, 5a, 5c, 5e, 6b, 6d, 6e and the salicylaldehyde titanium complex Ti{3-But-2-(O)C6H3CH=O}Cl3(THF) (7) have been determined. Activation of complexes 5a-e and 6b-e with MAO in an ethene saturated toluene solution gives polyethylene with at best high activity depending on the imine substituent.     

Development of a pulsed-laser,fiber-optic-based fluorimeter: determination of fluorescence decay times of polycyclic aromatic hydrocarbons in sea water

A fiber-optic-based system for remote measurement of time-resolved fluorescence emission spectra is described and characterized. A pulsed nitrogen laser is used to induce fluorescence and a time-gated, one-dimensional photodiode array is used to measure the decay of the fluorescence emission spectra. The results compare favorably with reported values for well characterized compounds having fluorescence decay times in the range 4–50 ns. The potential of using time-resolved fluorimetry (TRF) over fiber-optic cables as a means of improving the specificity of remote fluorescence determinations of spectrally similar polycyclic aromatic hydrocarbons in sea water is demonstrated.     

The design of boronic acid spectroscopic reporter compounds by taking advantage of the pK(a)-lowering effect of diol binding: nitrophenol-based color reporters for diols

The complex that forms between a boronic acid and a diol is often much more acidic than the starting boronic acid. In conditions where the solution pH is between the two pK(a) values, the boron atom will convert from a neutral trigonal form to an anionic tetrahedral form upon complexation. Such a change is likely to dramatically alter the electron density of neighboring groups. Utilizing this effect, we have designed and synthesized two nitrophenol-based boronic acid reporter compounds that change ionization states and therefore spectroscopic properties upon diol binding. Both compounds show significant UV changes upon addition of saccharides. For example, a blue shift of the absorption max from 373 to 332 nm was observed with the addition of D-fructose to 2-hydroxy-5-nitrophenylboronic acid at neutral pH. Such a reporter compound can be used as a recognition and signaling unit for the construction of polyboronic acid sensors for the selective and specific recognitions of saccharides of biological significance.     

Does alpha-fluorination affect the structural trans-influence and kinetic trans-effect of an alkyl ligand? Molecular structures of Pd(TMEDA)(CH(3))(R(F)) and a kinetic study of the trans to cis isomerization of Pt(TMEDA)(CH(3))(2)I(R(F)) [R(F) = CF(2)CF(3), CFHCF(3), CH(2)CF(3)

Reaction of Pd(TMEDA)(CH(3))(2) [TMEDA = tetramethylethylenediamine] with fluoroalkyl iodides R(F)I affords a series of square planar Pd(II) complexes Pd(TMEDA)(CH(3))(R(F)) [R(F) = CF(2)CF(3) (9), CFHCF(3) (10), CH(2)CF(3) (11)], presumably by oxidative addition followed by reductive elimination of CH(3)I. The solid-state structures of each compound have been determined by single crystal X-ray diffraction studies, allowing the effect of increasing alpha-fluorination on the structural trans-influence of alkyl ligands to be examined. In these compounds there is no significant difference observed in the trans-influence of the three fluorinated alkyl ligands toward the trans-N atom, although a significant cis-influence on the neighboring methyl ligand is apparent. Oxidative addition of the same series of fluoroalkyl ligands to the corresponding Pt(TMEDA)(CH(3))(2) affords octahedral Pt(IV) complexes trans-Pt(TMEDA)(CH(3))(2)(R(F))I [R(F) = CF(2)CF(3) (12), CFHCF(3) (13), CH(2)CF(3) (14)] as the kinetic products. In each case, subsequent isomerization to the corresponding all cis-isomers is observed; in the case of 13, the stereocenter at the alpha-carbon results in two diastereomeric cis-isomers, which are formed at different rates. The molecular structures of 13 and its more stable all cis-isomer 16b have been crystallographically determined. Kinetic studies of the trans-cis isomerization reactions show the mechanism to involve a polar transition state, presumably involving iodide dissociation, followed by rearrangement of the cation, and iodide recombination. High dielectric solvents increase the rate, but solvent coordinating ability has no effect. Dissolved salts (LiI, LiOTf) show normal accelerative salt effects, with no inhibition in the case of added iodide, consistent with the formation of an intimate ion pair intermediate. The kinetic parameters show that the trans-effects of fluoroalkyl ligands in these compounds follow the order expected from the relative sigma-donor properties of the ligands, with CF(2)CF(3) < CFHCF(3) < CH(2)CF(3).     

Fluorescence and Photochemistry of Recombinant Phytochrome from the Cyanobacterium Synechocystis

Fluorescence and photochemical properties of phytochrome from the cyanobacterium Synechocystis were investigated in the temperature interval from 293 to 85 K. The apoprotein was obtained by overexpression in Escherichia coli and assembled to a holophytochrome with phycocyanobilin (PCB) and phytochromobilin (PφB), Syn(PCB)phy and Syn(PφB)phy, respectively. Its red-absorbing form, Pr, is characterized at 85 K by the emission and excitation maxima at 682 and 666 nm in Syn(PCB)phy and at 690 and 674 nm in Syn(PφB)phy. At room temperature, the spectra are blue shifted by 5–10 nm. The fluorescence intensity dropped down by ?15–20-fold upon warming from 85 to 293 K and activation energy of the fluorescence decay was estimated to be ca 5.4 and 4.9 kJ mol^?1 in Syn(PCB)phy and Syn(PφB)phy, respectively. Phototransformation of Pr upon red illumination was observed at temperatures above 160–170 K in Syn(PCB)phy and above 140–150 K in Syn(PφB)phy with a 2–3 nm shift of the emission spectrum to the blue and increase of the intensity of its shorter wavelength part. This was interpreted as a possible formation of the photoproduct of the meta-Ra type of the plant phytochrome. At ambient temperatures, the extent of the Pr phototransformation to the far-red-absorbing form, Pfr, was ca 0.7–0.75 and 0.85–0.9 for Syn(PCB)phy and Syn(PφB)phy, respectively. Fluorescence of Pfr and of the photoproduct similar to lumi-R was not observed. With respect to the photochemical parameters, Syn(PCB)phy and Syn(PφB)phy are similar to each other and also to a small fraction of phyA (phyA″) and to phyB. The latter were shown to have low photochemical activity at low temperatures in contrast to the major phyA pool (phyA″), which is distinguished by the high extent (ca 50%) of Pr photoransformation at 85 K. These photochemical features are interpreted in terms of different activation barriers for the photoreaction in the Pr excited state.     

Separation of thiosulfate and the polythionates in gold thiosulfate leach solutions by capillary electrophoresis

A technique for the separation of thiosulfate (S(2)O(3) (2-)), polythionates (S(x)O(6) (2-), x = 3 to 5) and the gold(I) thiosulfate complex (Au(S(2)O(3))(2) (3-)) using capillary electrophoresis with simultaneous UV detection at 195 and 214 nm is presented. The five species were separated in under 3 min with a total analysis time of 8 min, using an electrolyte containing 25 mM 2,2-bis(hydroxymethyl)-2,2',2"-nitrilotriethanol (bis-tris) adjusted to pH 6.0 with sulfuric acid and an applied voltage of -30 kV. While the gold(I) thiosulfate complex could be separated from the other analytes of interest under these conditions, the quantification of this complex was not possible due to inconsistent peak areas and peak splitting effects induced by the sulfur-oxygen species in the leach matrix. Detection limits calculated for 3s pressure injection at 50 mbar ranged between 0.5-2 microM. The method was linear over the ranges 40-8000, 10-2000, 10-2000, and 5-2000 microM for thiosulfate, trithionate, tetrathionate, and pentathionate, respectively. The technique was applied successfully to leach liquors containing 0.5 M ammonium thiosulfate, 2 M ammonia, 0.05 M copper sulfate and 20% w/v gold ore, diluted 1:100 prior to analysis.     

Identification of components in waste streams by electrospray and tandem mass spectrometry

Highly polar, non-gas-chromatographable compounds have few unambiguous analysis protocols for environmental applications. A recent environmental investigation, concerning the identification of a non-gas-chromatographable yellow component in chemical waste water and in effluents from a biological wastewater treatment plant required the use of a number of analytical approaches. Electrospray mass spectrometry, tandem mass spectrometry, high-performance liquid chromatography, nuclear magnetic resonance, and molecular spectroscopy of commercial and synthesized chlorodinitrophenol isomers were required in order to identify the specific isomer causing the color. The present report summarizes the electrospray ionization and tandem mass spectrometric studies that were used. The mass spectrometric study shows that two different isomers of chlorodinitrophenol exhibit very different collision-induced dissociation (CID) spectra. Differences in the tandem mass spectra can be attributed to the different structures of the anions formed from these two different isomers. Instrumentation that uses electrospray ionization and produces CID mass spectra and optical absorption spectra in a single analysis may be required in order to produce highly specific information on non-gas-chromatographable compounds found in the environment.     

Effect of electrospray ionization conditions on low-energy tandem mass spectra of peptides

The effect of electrospray ionization (ESI) conditions on low-energy tandem mass spectra of peptides in the relative molecular mass range 400–1200 was examined. For singly charged peptide ions the source skimmer potential (which determines the degree of acceleration of the ions through the intermediate pressure region in the source) can strongly influence the extent of fragmentation observed in tandem mass spectra, especially at low collision energies. For each peptide there is an optimum skimmer potential which represents a balance between generating ions with sufficient internal energy for subsequent tandem mass spectrometric experiments and inducing the onset of other processes such as source fragmentation. The fragmentation which can be achieved in tandem mass spectra with high skimmer potentials differs from ESI source fragmentation for the same peptides. We have found that fragmentation in ESI mass spectra depends both on skimmer potential and on solvent pH, presumably because the latter determines the proportion of doubly charged species generated from a given peptide. Low-energy tandem mass spectra of peptides following ESI are equally as sensitive to peptide structure and the type of adduct studied (e.g. [M + H]⁺ vs. [M + NH₄]⁺) as tandem mass spectra obtained following older ionization methods such as fast atom bombardment.     

TECRA Unique test for rapid detection of Salmonella in food: collaborative study

The TECRA Unique Salmonella test uses the principle of immunoenrichment to allow rapid detection of Salmonellae in food. A collaborative study was conducted to compare the TECRA Salmonella Unique test with the reference culture method given in the U.S. Food and Drug Administration's Bacteriological Analytical Manual. Three food types (milk powder, pepper, and soy flour) were analyzed in Australia and 2 food types (milk chocolate and dried egg) were analyzed in the United States. Forty-one collaborators participated in the study. For each of the 5 foods at each of the 3 levels, a comparison showed no significant differences (p > or = 0.05) in the proportion of positive test samples for Unique and that for the reference method using the Chi-square test for independence with continuity correction.